Euro Car Parts - Bunch of Clowns
Moderator: martauto
-
Ianb
- E30 Zone Regular

- Posts: 517
- Joined: Sun Feb 14, 2010 11:00 pm
Is is just me or is everyone finding that Euro's are employing Living brain donors and selling shit quality parts ! First bad experience from Euro's in Crayford 2 e36 328i rads, both faulty and the second one so poorly made it was a joke - The top bar that the mount engages on was cut an inch short of the width of the core and glued directly onto the fins so any movement/ vibration is taken by the core ! and both -leaked immediately they were fitted. Following this got a refund and bought a 2nd hand genuine rad and resolved not to bother with Crayford again. This week needed a clutch master cyl for E30 and E36 Slave so phoned Euro's at Catford on Wednesday they said they had both and gave me an order ref - -Took Thursday afternoon off work, drove all the way to Catford to be told that they only had the slave in stock and had no record of the ref No ( although they admitted it was correct for a no issued on Wednesday !! So paid for both and said I'll have to collect Saterday. Today was at work and thought i can get a train down there at lunchtime - Phoned them to see if it had come in and apparently because i left the invoice at home they can't tell me if it's in and i can't pick it up - - Arrragh 
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
There not all clowns, your best to deal with Meatballs82 (Matt) or his partner in crime Olly via the traders section here. Made an order a few weeks back and they could not be more helpful and all parts arrived as described.
-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
Hi mate,
Were you given a choice of brand on the radiator when ordering?
I don't understand how they can't tell you if the master cylinder is in - even if you don't have a ref no they can find out the part number in the same way they did when you ordered it, and trace part movement back to your reference?
I'm sorry to hear of your troubles - next time you need to order give me a shout
Were you given a choice of brand on the radiator when ordering?
I don't understand how they can't tell you if the master cylinder is in - even if you don't have a ref no they can find out the part number in the same way they did when you ordered it, and trace part movement back to your reference?
I'm sorry to hear of your troubles - next time you need to order give me a shout

-
Ianb
- E30 Zone Regular

- Posts: 517
- Joined: Sun Feb 14, 2010 11:00 pm
Thanks for the reply Meatballs, I would have gone through yourself but unfortunately do not have the luxury of time on my side at the mo ( just finished M50 conv and want to take it to Lemans for the 24hr race on 15th June so every day i have on the road for troubleshooting counts and just pulled out of garage for the first run to MOT and the clutch hydraulics shat themselves ) I wasn't given a choice of price / spec on the rad and worse than that after the first return i actually said to them don't you do another make to which i was told that the next one would be fine as they've never had any returns on these ( strange since the box the first one was in had already been opened ) . As for the Catford branch, they used to be excellent but following my phone conversation with them today I'm a bit nervous because i gave them the reg for the Master cyl and the guy on the phone today said there's nothing against the reg ! If i get there saterday at 8am invoice in hand to be told they have not got it i won't be responsible for my actions ............
-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
Firstly - I don't want to rain on your parade but an M50 converted turd is never going to win lemans mate!!
I can deliver next day FOC if you get to me early in the morning. Your experience this week is the reason I started trading on here, hopefully I'm turning the zones ECP opinion around but it takes time!
Give me a shout next time
I can deliver next day FOC if you get to me early in the morning. Your experience this week is the reason I started trading on here, hopefully I'm turning the zones ECP opinion around but it takes time!
Give me a shout next time

-
Ianb
- E30 Zone Regular

- Posts: 517
- Joined: Sun Feb 14, 2010 11:00 pm
"Firstly - I don't want to rain on your parade but an M50 converted turd is never going to win lemans mate" LOL
Thanks Meatballs, I'll be in touch next time. I hope ECP recognise your efforts -
Thanks Meatballs, I'll be in touch next time. I hope ECP recognise your efforts -
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Euros cheaper 'no name no blame' E36 M43 rads are completely toilet, the cap will NOT seal as the thread on the header tank is so poorly made that it actually damages the cap !
My local branch who I have used for years did not offer me any other option and after trying 3 and finding them all crap, they then found a Nissens one for another £30 . I argued that they had cost me a couple of hours and some wasted antifreeze so the least they could do is swallow the £30 and give me the Nissens rad for the same price. They didn't , so I went to GSF !
My local branch who I have used for years did not offer me any other option and after trying 3 and finding them all crap, they then found a Nissens one for another £30 . I argued that they had cost me a couple of hours and some wasted antifreeze so the least they could do is swallow the £30 and give me the Nissens rad for the same price. They didn't , so I went to GSF !
-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
I can sympathise with your situation but we would not stock aftermarket parts if there was no demand for them!pacerpete wrote:Euros cheaper 'no name no blame' E36 M43 rads are completely toilet, the cap will NOT seal as the thread on the header tank is so poorly made that it actually damages the cap !
My local branch who I have used for years did not offer me any other option and after trying 3 and finding them all crap, they then found a Nissens one for another £30 . I argued that they had cost me a couple of hours and some wasted antifreeze so the least they could do is swallow the £30 and give me the Nissens rad for the same price. They didn't , so I went to GSF !
Quality does vary from one manufacturer to another but you should always be given the choice of OE or aftermarket.
In this situation at my branch you would have got the part for the same price, or at least a few gallons af antifreeze FOC.

-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
ECP are total w a nkers
Simon! edit Rav
Simon! edit Rav
Last edited by Rav335uk on Fri May 18, 2012 10:37 pm, edited 1 time in total.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
BEERBOY123
- E30 Zone Squatter

- Posts: 1537
- Joined: Sat Jun 06, 2009 11:00 pm
In probably 20 visits I have only ever had one switched on guy, who did me a good deal and got the right part first time.
On every other occasion I've had to queue for ages, have been given all sort of wrong parts and sometimes had a hard time when trying to get them changed.
It's a bit like buying Panini stickers: you never know what you've got until you open the packaging, and only rarely do you get a foil badge! Not a huge fan, but they're good for certain things like oil filters and air filters. Beyond that it's a bloody lottery!
On every other occasion I've had to queue for ages, have been given all sort of wrong parts and sometimes had a hard time when trying to get them changed.
It's a bit like buying Panini stickers: you never know what you've got until you open the packaging, and only rarely do you get a foil badge! Not a huge fan, but they're good for certain things like oil filters and air filters. Beyond that it's a bloody lottery!
Two headblenders, couple of bags of MC Hammer, 5 litres of FFF, a 48ft bastard, a box of jumped-up custard and some soggy chimps
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Save yourselves the fuel, arguments, return visits and stress in general and just order from Meatballs 
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
I can vouch for meatballs too, just contact him when you want something. Owns an E30 too so he knows what you are talking about.

-
sweep
- Married to the E30 Zone

- Posts: 10110
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
Euro car parts sell cheap crap now.
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Meatballs82 wrote:I can sympathise with your situation but we would not stock aftermarket parts if there was no demand for them!pacerpete wrote:Euros cheaper 'no name no blame' E36 M43 rads are completely toilet, the cap will NOT seal as the thread on the header tank is so poorly made that it actually damages the cap !
My local branch who I have used for years did not offer me any other option and after trying 3 and finding them all crap, they then found a Nissens one for another £30 . I argued that they had cost me a couple of hours and some wasted antifreeze so the least they could do is swallow the £30 and give me the Nissens rad for the same price. They didn't , so I went to GSF !
Quality does vary from one manufacturer to another but you should always be given the choice of OE or aftermarket.
In this situation at my branch you would have got the part for the same price, or at least a few gallons af antifreeze FOC.
It doesn't matter how cheap something is if it does NOT fit
At least the Q Drive cemtre bearings and doughnuts fit correctly and last a few hundred miles.......
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
Q drive stuff shouldnt be legal
i put a q drive drop link on the touring its not fooked 6 month down the line and 2-3k miles
My mother has used q drive ball joints on an e36 compact, replaced 2 of them and the same two were fooked at the next mot
Gives ECP a bad name ive used non branded white box stuff off ebay and its better than that
i put a q drive drop link on the touring its not fooked 6 month down the line and 2-3k miles
My mother has used q drive ball joints on an e36 compact, replaced 2 of them and the same two were fooked at the next mot
Gives ECP a bad name ive used non branded white box stuff off ebay and its better than that
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
At least the outer ones fit in the hole. The Q Drive E36 inner balljoints are machined incorrectly and will not even fit in the subframe, ask me how I knowAlex wrote:Q drive stuff shouldnt be legal
i put a q drive drop link on the touring its not fooked 6 month down the line and 2-3k miles
My mother has used q drive ball joints on an e36 compact, replaced 2 of them and the same two were fooked at the next mot
Gives ECP a bad name ive used non branded white box stuff off ebay and its better than that
That reminds me, I need to submit an invoice to the coonts, they have agreed to give me a warranty labour claim on that debacle.
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
Shockingpacerpete wrote:At least the outer ones fit in the hole. The Q Drive E36 inner balljoints are machined incorrectly and will not even fit in the subframe, ask me how I knowAlex wrote:Q drive stuff shouldnt be legal
i put a q drive drop link on the touring its not fooked 6 month down the line and 2-3k miles
My mother has used q drive ball joints on an e36 compact, replaced 2 of them and the same two were fooked at the next mot
Gives ECP a bad name ive used non branded white box stuff off ebay and its better than that![]()
![]()
![]()
That reminds me, I need to submit an invoice to the coonts, they have agreed to give me a warranty labour claim on that debacle.
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
At least GSF have a user friendly website now
Its taken them long enough
Its taken them long enough
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
About time, it was truly epically sadAlex wrote:At least GSF have a user friendly website now
Its taken them long enough
By the way, our nice friends at ECP do stock the excellent E30 style solid Meyle E36 outer balljoint which is the only way to go. Best of all they are cheaper than the sh1tty OE type
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
The bottom line is Meatballs, if a company continues to stock and sell crap then their name will be crap. Its all very well stocking cheaper lines / alternatives but if they either don't fit or don't last, whats the point? it's wrecking your reputation!
I have had many experiences similar to the above negatives and I now avoid the place as much as i can. Theres only so many times I can drive into Redhill or over to Chessington and swallow the time and money. OEM make Brake pads is about my limit with them and even then I still buy genuine sensors from the dealer after a pain in the arse experience with an ecp supplied e46 rear.
Personally I think you're a bit of a one man crusade fighting a losing battle. I admire your loyalty and balls for trying mind. I hope your bosses appreciate your efforts.
I have had many experiences similar to the above negatives and I now avoid the place as much as i can. Theres only so many times I can drive into Redhill or over to Chessington and swallow the time and money. OEM make Brake pads is about my limit with them and even then I still buy genuine sensors from the dealer after a pain in the arse experience with an ecp supplied e46 rear.
Personally I think you're a bit of a one man crusade fighting a losing battle. I admire your loyalty and balls for trying mind. I hope your bosses appreciate your efforts.
B7's Motto. "If it's French, BURN IT!!!!!!"
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
I've used ECP for years - always bought the best quality stuff and never had a problem.
Think it depends on the branch - I also make sure I know what the bits im ordering should look like and check everything before walking out of the door with it.
For deliveries of bigger orders definately use Meatballs - excellent service
Think it depends on the branch - I also make sure I know what the bits im ordering should look like and check everything before walking out of the door with it.
For deliveries of bigger orders definately use Meatballs - excellent service

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
powelly
- E30 Zone Squatter

- Posts: 1649
- Joined: Wed Dec 06, 2006 11:00 pm
- Location: On the scrap heap
They obviously don't know you that well, I can't imagine you letting any of that precious antifreeze escape, every pounds a prisoner. Speaking of which the "pre-owned" Land Rover coolant is doing very well in the Hompact.pacerpete wrote:Euros cheaper 'no name no blame' E36 M43 rads are completely toilet, the cap will NOT seal as the thread on the header tank is so poorly made that it actually damages the cap !
My local branch who I have used for years did not offer me any other option and after trying 3 and finding them all crap, they then found a Nissens one for another £30 . I argued that they had cost me a couple of hours and some wasted antifreeze so the least they could do is swallow the £30 and give me the Nissens rad for the same price. They didn't , so I went to GSF !
Le Mans Classic 2006-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
B7 wrote:The bottom line is Meatballs, if a company continues to stock and sell crap then their name will be crap. Its all very well stocking cheaper lines / alternatives but if they either don't fit or don't last, whats the point? it's wrecking your reputation!
I have had many experiences similar to the above negatives and I now avoid the place as much as i can. Theres only so many times I can drive into Redhill or over to Chessington and swallow the time and money. OEM make Brake pads is about my limit with them and even then I still buy genuine sensors from the dealer after a pain in the arse experience with an ecp supplied e46 rear.
Personally I think you're a bit of a one man crusade fighting a losing battle. I admire your loyalty and balls for trying mind. I hope your bosses appreciate your efforts.
I agree 100%, I would never fit a Qdrive part to my car, nor push it to any zoners unless they ask for it, even then I will try to steer them away, ask around! Some of it is truly dreadful I admit. I have been selling to the zone for 13 months and honestly had not one warranty issue or complaint.
Even when I look through my warranty folder, so many LUK, Sachs, Valeo clutch claims, yet we sell Transmech clutches every day too, sometimes under £20 and I've hardly ever seen one come back. Its the same story with Eicher, our alternative braking range. any braking brands sold in UK have to work within 10-15% of OE specs - we have very few issues but its peoples perception of the quality that makes it harder to sell sometimes. Look at Skoda 20 years ago compared with today as a brand.
We have garages spending between £200 and 25K per month, most decent garages wont touch anything less than OE, others want the cheapest stuff they can get, we have to cater for both tastes like any other business does.
As for our rep, ECP can be likened to Man utd - many love us, just as many hate us!
Regardless we are the biggest and the best and continue to expand at a rate that defies belief, especially given the current economic climate! can that be done by accident or with a bad rep in the marketplace?
People will start a thread about having nightmares with various company's, myself included after a 6 month talk talk battle!! How many people start a thread to say how wonderful the service was? not half as many...
I don't think we're losing any battles, I just wanted to try changing some peoples opinions and take all your hard earned cash in the process!winkeye

-
adamski80
- E30 Zone Regular

- Posts: 722
- Joined: Tue Feb 24, 2009 11:00 pm
- Location: kings lynn / essex
meatballs..... any news on my collars pal?????
-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
Get a quote for a Lemforder arms from the dealers, I'm banging them out at £45 plus vat to the zonezaust wrote:Well I have never had an item from ecp that hasn't gone back because of either poor quality or missing bit's . sh!t company trying to palm off crap at most of the time dealer prices.
"All parts" if you don't have time to go to a dealer and they deliver.

-
adamski80
- E30 Zone Regular

- Posts: 722
- Joined: Tue Feb 24, 2009 11:00 pm
- Location: kings lynn / essex
Any news blue????????????????????Meatballs82 wrote:Get a quote for a Lemforder arms from the dealers, I'm banging them out at £45 plus vat to the zonezaust wrote:Well I have never had an item from ecp that hasn't gone back because of either poor quality or missing bit's . sh!t company trying to palm off crap at most of the time dealer prices.
"All parts" if you don't have time to go to a dealer and they deliver.
-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
Did you not get your PM? I have been struggling to get hold, ordered ten from H&R, one turned up on Tuesday... they're now saying another 11-15 days, I've ordered a shedload now as got about 8 zoners waiting desperately! I doubt I'll have them much before the end of the month mate, apologiesadamski80 wrote:meatballs..... any news on my collars pal?????

-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
And that's an extra good deal ?Meatballs82 wrote:Get a quote for a Lemforder arms from the dealers, I'm banging them out at £45 plus vat to the zonezaust wrote:Well I have never had an item from ecp that hasn't gone back because of either poor quality or missing bit's . sh!t company trying to palm off crap at most of the time dealer prices.
"All parts" if you don't have time to go to a dealer and they deliver.
No it's not as all parts supply the same and so do bennets at the same price. Only difference is they give me the same side I ask for and if it's not in stock they say when it will be there and if there's a delay they let me know. Not just a spotty kid behind the desk who does not give a monkey. Sorry but I have never had a good experience with ecp and I have no faith what so ever. Even when I tried to get yellow stuff pads I was told they no longer supply them as they are not made anymore. Quick phone call to you Wembley branch and totally different awnser. Went to Jazz at top gear in the end paid a bit more but when service is good you don't mind.
-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
zaust wrote:And that's an extra good deal ?Meatballs82 wrote:Get a quote for a Lemforder arms from the dealers, I'm banging them out at £45 plus vat to the zonezaust wrote:Well I have never had an item from ecp that hasn't gone back because of either poor quality or missing bit's . sh!t company trying to palm off crap at most of the time dealer prices.
"All parts" if you don't have time to go to a dealer and they deliver.
No it's not as all parts supply the same and so do bennets at the same price. Only difference is they give me the same side I ask for and if it's not in stock they say when it will be there and if there's a delay they let me know. Not just a spotty kid behind the desk who does not give a monkey. Sorry but I have never had a good experience with ecp and I have no faith what so ever. Even when I tried to get yellow stuff pads I was told they no longer supply them as they are not made anymore. Quick phone call to you Wembley branch and totally different awnser. Went to Jazz at top gear in the end paid a bit more but when service is good you don't mind.
It is a good deal, GSF list them as £71 and out of stock, Cheapest I could find online just now was £59 and I'm still £5 cheaper delivered.
http://www.gsfcarparts.com/parts/steeri ... ontrol-arm
Last edited by Meatballs82 on Sat May 19, 2012 10:56 am, edited 1 time in total.

-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
All parts are a large supplier of most car makes and parts. They do o/e or value lines. There wish bone Lemforder is £59 inc. You can pick up but they normally drop it round by 2pm same day. Means you can get on with other jobs instead of faffing around waisting time. Sorry fella it's nothing personal against you but when you have only had bad experiences there's no going back. Also you start looking at other suppliers and find what you want.
tell you what give me a price on a full head set for an m30b35 inc head bolts must be elring and not the thicker gasket. and I do mean full. We can compare price. inc next day delivery.
tell you what give me a price on a full head set for an m30b35 inc head bolts must be elring and not the thicker gasket. and I do mean full. We can compare price. inc next day delivery.
-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
I dont take it personally, I was with talk talk for 6 long months when I bought my new house and had no internet or even a working phone line the whole time, got charged the whole time though, even after I left for a few months!!zaust wrote:All parts are a large supplier of most car makes and parts. They do o/e or value lines. There wish bone Lemforder is £59 inc. You can pick up but they normally drop it round by 2pm same day. Means you can get on with other jobs instead of faffing around waisting time. Sorry fella it's nothing personal against you but when you have only had bad experiences there's no going back. Also you start looking at other suppliers and find what you want.
tell you what give me a price on a full head set for an m30b35 inc head bolts must be elring and not the thicker gasket. and I do mean full. We can compare price. inc next day delivery.
If they called me today and offered me free broadband and calls for life, including an annual home ''customer service'' vist from Halma Sayek and Penelope Cruze I would tell them to go F**k a razor blade, on principal. So I know there's no going back after a certain point
Will get you a quote tomorrow!

-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
At the end of the day any company is only as good as the people on the phone/at the desk
FYI I bought a pair of Q-drive wishbones in 2006, I did about 30,000 miles with them on my white 4 door, they got swapped over to my chromie in 2009 and they are still going strong
FYI I bought a pair of Q-drive wishbones in 2006, I did about 30,000 miles with them on my white 4 door, they got swapped over to my chromie in 2009 and they are still going strong
-
Meatballs82
- E30 Zone Camper

- Posts: 1136
- Joined: Tue Jan 11, 2011 11:00 pm
- Location: Northamptonshite
Thats good going, but I think we've probably switched manufacturers a few times since 2006!DanThe wrote:At the end of the day any company is only as good as the people on the phone/at the desk
FYI I bought a pair of Q-drive wishbones in 2006, I did about 30,000 miles with them on my white 4 door, they got swapped over to my chromie in 2009 and they are still going strong


