Guys with roll cages!

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

aaronsmart
E30 Zone Regular
E30 Zone Regular
Posts: 822
Joined: Fri Dec 18, 2009 11:00 pm
Location: Bournemouth

Post Tue May 15, 2012 4:28 pm

Im looking to fit a roll cage but wanted a full interior

How much work/modification would be needed to the interior or cage to make this work?

Thanks
Image
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue May 15, 2012 4:49 pm

You'll have to cut stuff.
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Motorhole
E30 Zone Addict
E30 Zone Addict
Posts: 2395
Joined: Tue Jul 12, 2005 11:00 pm
Location: Cheshire

Post Tue May 15, 2012 4:57 pm

Your back seats would be useless if fitting even the minimum spec 6-point cage as per the blue book.

Image

The harness bar running from left to right is not mandatory and you can get removable ones anyway. But the single diagonal brace is mandatory and would make rear seat access pretty much pointless!
andrew_baran
E30 Zone Regular
E30 Zone Regular
Posts: 762
Joined: Fri Feb 12, 2010 11:00 pm
Location: Leamington Spa

Post Tue May 15, 2012 5:10 pm

Looks like you'd have to absolutely butcher the rear seat bolsters to get the rear points on. Not gonna work IMO.
Image
Hoobs
E30 Zone Camper
E30 Zone Camper
Posts: 1204
Joined: Wed Sep 16, 2009 11:00 pm
Location: Cornwall

Post Tue May 15, 2012 6:04 pm

Best solution is a custom cage that can take interior into account. Likely to cost though.
Rally Prep - Cornwall
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
aaronsmart
E30 Zone Regular
E30 Zone Regular
Posts: 822
Joined: Fri Dec 18, 2009 11:00 pm
Location: Bournemouth

Post Tue May 15, 2012 7:30 pm

Ok cheers guys. Luckily my uncle is a metal worker and welder who used to build rally cars. I guess I'll have to go custom!
Image
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Tue May 15, 2012 8:09 pm

its crap they dont offer a middle ground cage. like they do full on race cages for stripped cars but im in the same boat. i want something ideally bolt in that will cover me, the front passenger and allow me to have the rear seats still in. i dont care if the car shape is perfectly held when rolled, i just dont want crushed to death if i have a drifting accident
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
steve_k
E30 Zone Team Member
E30 Zone Team Member
Posts: 8044
Joined: Fri May 23, 2008 11:00 pm
Location: in the vale of mansfield

Post Tue May 15, 2012 8:39 pm

If all you want it for is look's then go for a weichers show/roll cage as they are designed to work without modification to the rear bench.

they range in price from £350 (half/rear cage) upto £1000+ for a full multi point show cage (mirror polished).

try tuner shop for those.

but if you are going by the blue book then it look's like you will have to go custom.

it's all down to budget & required use.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Tue May 15, 2012 9:02 pm

does the weicher half cage give the driver protection? thats certainly all im bothered about. i wont be booting it with passengers anyway
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
steve_k
E30 Zone Team Member
E30 Zone Team Member
Posts: 8044
Joined: Fri May 23, 2008 11:00 pm
Location: in the vale of mansfield

Post Tue May 15, 2012 9:13 pm

verde wrote:does the weicher half cage give the driver protection? thats certainly all im bothered about. i wont be booting it with passengers anyway
well from what I've seen of them online they have removable door bars.
have a search online for them & you'll see what I mean.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
Motorhole
E30 Zone Addict
E30 Zone Addict
Posts: 2395
Joined: Tue Jul 12, 2005 11:00 pm
Location: Cheshire

Post Tue May 15, 2012 9:21 pm

Just be aware that with a show cage you might be taking a significant safety risk! Firstly, any rollcage, MSA, FIA spec or otherwise is a risk if it's not properly padded, especially without harnesses or a helmet as it's a very solid structure on which you can hit your head and flailing limbs on in an accident. Secondly, motorsport spec rollcage are manufactured from seamless steel tube or T45. Steel tubes not of the correct specification can split in an accident major impalage is the last thing you want!
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Tue May 15, 2012 9:24 pm

why would you want a cage plus rear seats?

to have anyone actually use the seats with a cage surrounding them would be increadibly dangerous. so if you have seats that are no longer useable you may aswell lose them all together.

a 'show' cage is exactly that, they offer virtually zero chassis stiffness, and virtually zero impact protection, but they do place nice hard metal bars close to your head.

probably one of the most stupid and pointless things ever invented.
cheers,

harry
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Tue May 15, 2012 9:38 pm

I dont wanna jack this guys thread. Im after a car with all the seats in i can buzz about with the mrs and a couple mates in reasonable comfort in. On the weekend or when alone I want to be able to boot it and get sideways, therefor the cage only needs to provide protection for me the driver. Even a roll bar over the front seats would do. I just want something that prevents the entire roof caving in if it decideds to roll. It doesnt need to be legally rally spec
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
User avatar
alan1272
E30 Zone Regular
E30 Zone Regular
Posts: 414
Joined: Sat Mar 04, 2006 11:00 pm
Location: dyserth, north wales

Post Tue May 15, 2012 9:46 pm

road rallying regulations require the retention of fully interior; although you do have to cut things. here's mine:


ImageImage

as you can see the fixed buckets seats and rear diagonal render the rear seats completely useless.
Image
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Tue May 15, 2012 9:53 pm

^^ that, thats exactly what id be after!

what cage is that? is it custom?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
User avatar
alan1272
E30 Zone Regular
E30 Zone Regular
Posts: 414
Joined: Sat Mar 04, 2006 11:00 pm
Location: dyserth, north wales

Post Tue May 15, 2012 11:03 pm

omp 6 point bolt in. i wouldn't recommend having passengers in the back though.
if you do put a cage in, do it to blue book spec, anything else is pointless.
Image
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Tue May 15, 2012 11:05 pm

as i said i wouldnt be driving hard enough to roll with passengers in so thats not really an issue.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed May 16, 2012 12:28 am

But the diagonal bar across the back seat will make it impossible for rear passengers to sit comfortably (or even get in or out at all). They'll either have a bar about 2 inches infront of their chest, or have one to split their head in two in the event you do have an accident (even if it isn't your fault and someone hits you). Your only option if you want to retain the use of your rear seats is to bolt in/out the entire cage when you want to do a drift event. Anything else will likely cause serious/fatal injury's to you/your passengers in the case of a RTC. Same thing goes for a "show" cage which will most likely not hold up in a heavy-ish accident (read more than 30mph) and could cause worse injuries than it not being installed at all. :D
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed May 16, 2012 12:35 am

good point, il just get a bolt in and remove it for taking the mates clubbing or what not and back in if i wanna get rowdy
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed May 16, 2012 12:47 am

I'd make sure anywhere on the cage near your head is well padded though. You'll certainly know about it if you hit your head on it, personally I would be wary about using a cage without using a helmet
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed May 16, 2012 1:16 am

id probably take a helmet if i was gunna get super sideways and id deffo take one to the track, i fuckin hate banging my head. its the worst pain there is
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
aaronsmart
E30 Zone Regular
E30 Zone Regular
Posts: 822
Joined: Fri Dec 18, 2009 11:00 pm
Location: Bournemouth

Post Wed May 16, 2012 9:54 am

I've never ha a car with a roll cage and hadn't really thought about the safety side for me ad passangers. I'll have to have a good think!
Image
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Post Wed May 16, 2012 12:25 pm

Cages for road cars are retarded and actually dangerous.

A cage isn't the thing that keeps you safe, it works as a system with proper bucket seats, harness' and helmet.

One without any of the others is also a danger.

For a start, when you wear harness' you have to wear them pretty dam tight so you can't move. As harness' don't stretch in an accident like normal seat belts, you need them tight so you don't get up momentum and end up snapping shoulder blades, necks etc etc. This makes it impossible to safely pull out of junctions etc . Also, a harness stops your head smashing into the huge chunks of metal that are now inches from your head. A loose harness won't do this and a 3 point safety belt certainly won't. An inch of cage padding won't do sh#t when your skull hits a steel tube at 70mph. Also you can't use the rear seats if you install harness' properly. Also, I wouldn't consider anything less than a 5 point harness so you don't end up submarining. They are quite annoying to put on and a right pain in the ass and you aren't going to want to do that for every drive to the shop.

Then you get onto seats, you need to install solid backed bucket seats to use the harness' as using harness' on a standard seat or those awful reclining buckets can break the pivot in a crash from the downward force exerted on the seat backs from the shoulder straps, potentially snapping your spine. Also buckets hold you in laterally so you can't slide off the seat into the roll over hoop in a side impact style accident. Also, rear passengers can't get in the back with fixed buckets.

Also, you ideally need to wear a helmet at all times when driving a caged car. I haven't always as it isn't practical but again, there are massive chunks of metal now in your cabin that weren't there before.

Makes for a very impractical car at the end of the day and will cost you a lot of money. Save cages for competition cars and don't drive like a cun+ on the road is my advice. Also stay away from show cages. When I was into my r5's, a forum member posted a picture of his car he rolled. Show cage had bent like butter straight down on the back of his neck pinning him against the steering wheel. Very lucky to get out of that one
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Wed May 16, 2012 12:35 pm

What you really need is a caged, stripped, "drift spec" E30 for the weekends and your current car for the road.
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Wed May 16, 2012 12:41 pm

What about an external cage 4x4 spec style??
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
Motorhole
E30 Zone Addict
E30 Zone Addict
Posts: 2395
Joined: Tue Jul 12, 2005 11:00 pm
Location: Cheshire

Post Wed May 16, 2012 12:55 pm

What Ross said! If you're planning on driving hard enough on the road such that you anticipate needing a cage and helmet...glad I don't live up your way. The track is for testing your limits. And roll cage or not, you're far safer crashing your car on a track than on the road with run-off areas, deformable barriers and marshals on hand.
billgatese30
E30 Zone Team Member
E30 Zone Team Member
Posts: 10989
Joined: Sun Jan 09, 2005 11:00 pm
Location: Tyne & Wear

Post Wed May 16, 2012 4:57 pm

Sorry, didn't realise you were drifting on the road, thought you were doing drift days (not all have mandatory helmet rules I don't think like some RWYB days). I'd definatley stay away from a cage on the road.
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed May 16, 2012 6:45 pm

naa fuck that i wouldnt be drifting on the road im not that daft. somewhere quiet and shut off or a track
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Wed May 16, 2012 10:46 pm

yeee ok euan i beleive that , just like i didnt have 2 non major drift incidents over the weekend :roll: :roll:

when the roads are quite assholes will shred tyres :wink:
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Thu May 17, 2012 12:05 am

Haha I say I wont but ur probs right. What happened? Is ur car ok?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Thu May 17, 2012 7:24 am

BATTS91 wrote:yeee ok euan i beleive that , just like i didnt have 2 non major drift incidents over the weekend :roll: :roll:

when the roads are quite assholes will shred tyres :wink:
I couldnt agree more!! :roll:
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!