327 or,sc

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
guss
E30 Zone Regular
E30 Zone Regular
Posts: 390
Joined: Sun Nov 21, 2010 11:00 pm
Location: Cheshire

Post Sat May 12, 2012 8:03 pm

AlReady happy with my m20m25 engine except having got a cabriolet can't stop thinking about making it bigger just for more torque .happy with the power after fitting btb manifold it has made a huge difference .so I'm thinking of making it into a2.7 or supercharging it.
If making it to a 2.7 would the quality be of the build be similar to that of alpina?
Or would fitting a soup charger be adequate I eventually want to incorporate both so just some ideas as to what I'm getting into : :idea:
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Sun May 13, 2012 8:31 am

i'm sure you'll find some useful info in this section:

http://www.e30zone.net/modules.php?name ... forum&f=28

:)
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
User avatar
guss
E30 Zone Regular
E30 Zone Regular
Posts: 390
Joined: Sun Nov 21, 2010 11:00 pm
Location: Cheshire

Post Sun May 13, 2012 11:12 am

Yeh I've seen some of these just wanted to know more about reliability issues if any .would parts used be of similar quality etc
I don't want to change the engine if I'm going to gain more problems :cheers:
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sun May 13, 2012 11:45 am

Quality of engine build depends entirely on the parts used and the standard of workmanship fitting them.

For instance, you could buy the best parts available, but if they're poorly assembled, it will run like a bag of nails.

There needs to be close attention given to the honing of the cylinder bores, line boring of the crank main bearings, fitting of the bearings, balancing of the rotating parts, new gaskets, careful setting up of the cam, etc, etc. Done with care and attention to detail, you can build a jewel of an engine, that is well-balanced and revs sweetly, and lasts well.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
steve_k
E30 Zone Team Member
E30 Zone Team Member
Posts: 8044
Joined: Fri May 23, 2008 11:00 pm
Location: in the vale of mansfield

Post Sun May 13, 2012 11:53 am

Aswell as the link adit posted have a look in the wiki as there's a giude (of sorts) to building both a 2.7 & a 2.8.

it might be worthwhile sending an email to ANT on here (A-tech) as he should be able to help you out with some very good advise.

also depending on your budget you could also have a look at Ireland engineering in the USA as they offer stroker kit's ranging from 2.9 upto 3.1 with all the parts you'd need including H section steel conrods & crankshafts.

good luck & keep us posted as to what you decide to do.
all the info is out there you just need to look.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
User avatar
guss
E30 Zone Regular
E30 Zone Regular
Posts: 390
Joined: Sun Nov 21, 2010 11:00 pm
Location: Cheshire

Post Sun May 13, 2012 5:57 pm

Im looking at having it done late summer and a tech seem the people to do that. The answers I'm looking for didn't seem to be in any threads ,just looking at all options before forking out the family holiday money thanks for your knowledge 8O