Heated Washer Jets
Moderator: martauto
-
willf
- E30 Zone Newbie
- Posts: 122
- Joined: Fri Oct 07, 2011 11:00 pm
Hi, could anyone with heated jets please take a picture of where the loom plugs in under the bonnet at all please?
-
Grrrmachine
- E30 Zone Wiki / Team Member
- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
willf
- E30 Zone Newbie
- Posts: 122
- Joined: Fri Oct 07, 2011 11:00 pm
cheers mate, have had a look at that but its for the e36 isnt it?
-
Grrrmachine
- E30 Zone Wiki / Team Member
- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Parts list mentions E36, E34 and E30, so the concept is the same for all.
Either way, the wiring definitely comes down on the driver's side of the bonnet, and I'd expect the plug to be down by the washer bottle somewhere considering the amount of wiring in that area.
Either way, the wiring definitely comes down on the driver's side of the bonnet, and I'd expect the plug to be down by the washer bottle somewhere considering the amount of wiring in that area.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Heated washer jet loom connects to the plug that connects to the existing washer pump.
Disconnect the plug from the pump, plug it into the socket on the jets loom, then push an identical plug to the one you removed from the pump, which is part of the jets loom, back into the empty connector on the pump.
Disconnect the plug from the pump, plug it into the socket on the jets loom, then push an identical plug to the one you removed from the pump, which is part of the jets loom, back into the empty connector on the pump.