Engine fooked :(

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 1:08 pm

Got a phone call from the Mrs this morning.
She returned to the car in Asda to find it sat in the middle of a rainbow coloured puddle.
Instructed her on how to lift the bonnet and check the dipstick level which surprisingly she managed.
Oil level just below max,thank god.
Told her to start it and listen/look for anything wierd happening....yeah she replied,its chuffing Blue smoke from the exhaust 8O
By this time I was pissed off so just told her to drive it home and leave it till I get there.
Well ive just got home and its not good.
Smokes pretty bad above 2.5k and has all of a sudden developed a leak from the rocker gasket(new 12 months ago and never leaked).
When I switched it off I removed the oil filler cap.Loads of pressure was released with an almighty whoosh :cry:
Fucking car.Its been running perfectly untill this and has never let me down till now!
Cant have come at a worse time really either..... :roll:
Image
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Thu May 10, 2012 1:12 pm

Bag of shite mate, my sympathies
Barx325i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6493
Joined: Wed Jul 26, 2006 11:00 pm

Post Thu May 10, 2012 1:12 pm

not cool, is this an e30 lump gone plop?
User avatar
Daryll
E30 Zone Squatter
E30 Zone Squatter
Posts: 1996
Joined: Mon Feb 14, 2005 11:00 pm
Location: Essex

Post Thu May 10, 2012 1:14 pm

Crap. Sorry to hear that. Assuming it's an M20. :(
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu May 10, 2012 1:18 pm

What car is this Tony?!
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 1:18 pm

M52 :cry:
Image
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Post Thu May 10, 2012 1:25 pm

That sucks mate!

Have a very nice low mileage head if it needs one
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu May 10, 2012 1:26 pm

Ballsacks.. :(
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
goosiegander
Zonegoose
Posts: 2544
Joined: Sun Nov 19, 2006 11:00 pm
Location: East Anglia

Post Thu May 10, 2012 1:31 pm

:( harsh dude, hope its in some way salvagable...
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu May 10, 2012 1:41 pm

Why was the crank case so highly pressurised after the engine was stopped? I'd be having a good look at the crankcase vent plumbing and looking for a blockage before condemning the thing.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 1:43 pm

Im thinking it may be rings or bores worn.
Thing is it runs/goes well still.
Time to throw in the towel with this one I think,time and enthusiasm really isnt on my side!

Anyone want a cheap M52 Touring :x
Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 1:46 pm

Brianmoooore wrote:Why was the crank case so highly pressurised after the engine was stopped? I'd be having a good look at the crankcase vent plumbing and looking for a blockage before condemning the thing.
Its had an airleak for a while now.
Turned out it was a split in the ICV hose.
This was replaced about 3 weeks ago.
After that the idle took a while to drop so removed the ICV and gave it a clean out,that sorted the idle out.
Been fine from then untill now.
Image
nickso
E30 Zone Addict
E30 Zone Addict
Posts: 4396
Joined: Sat Jul 23, 2005 11:00 pm
Location: Go do that voodoo that you do so welllllllll!!

Post Thu May 10, 2012 1:46 pm

Brianmoooore wrote:Why was the crank case so highly pressurised after the engine was stopped? I'd be having a good look at the crankcase vent plumbing and looking for a blockage before condemning the thing.
+1

Particularly if it still has the diaphragm valve on.

I know how you feel though Tony, my M52 is not starting AGAIN this week. :roll:
Image

'88 e30 328i M52 track bint.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu May 10, 2012 1:52 pm

Look for a BLOCKAGE not a leak. If the crankcase can't vent, it would push oil out through every seal and up into the head past the bores, giving blue smoke. Fits all the symptoms you say.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 1:53 pm

Crancase breather connects direct to the MAF pipe.
Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 1:56 pm

Brianmoooore wrote:Look for a BLOCKAGE not a leak. If the crankcase can't vent, it would push oil out through every seal and up into the head past the bores, giving blue smoke. Fits all the symptoms you say.
Ill go and check now...
Image
Barx325i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6493
Joined: Wed Jul 26, 2006 11:00 pm

Post Thu May 10, 2012 1:59 pm

fingers crossed, & on the positive side, it sounds like 90% of the oil will have still been doing its job.
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Thu May 10, 2012 2:01 pm

hope you can sort this easily Tony After the Graft you've put in.
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Thu May 10, 2012 2:23 pm

Cyclone valve is a favourite.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 2:28 pm

Crankcase pipe removed and no signs of any blockages.
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu May 10, 2012 2:30 pm

Simon13 wrote:Cyclone valve is a favourite.
Not by the sounds of it-
eko wrote:Crancase breather connects direct to the MAF pipe.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 2:33 pm

Simon13 wrote:Cyclone valve is a favourite.
Oil seperator was binned when M50 manifold went on.
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu May 10, 2012 2:33 pm

Next job = compression test
walrus1968
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Sat Jan 14, 2012 11:00 pm
Location: Seaham Co.Durham

Post Thu May 10, 2012 4:49 pm

eko wrote:Im thinking it may be rings or bores worn.
Thing is it runs/goes well still.
Time to throw in the towel with this one I think,time and enthusiasm really isnt on my side!

Anyone want a cheap M52 Touring :x

shitty knickers mate

how cheap ?? winkeye winkeye
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 5:27 pm

DanThe wrote:Next job = compression test
Yep,fooking thing can wait till it stops raining though,cant even be arsed to go out to it :mad:
Image
shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Thu May 10, 2012 6:41 pm

Thats shit Tony .Fingers crossed it aint to bad but the signs aint looking good.
Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 6:50 pm

Im going to get a new crankcase breather pipe on it as the one on there now is a bit of a bodge to be honest(although been fine for nearly 18 months now).
Basically ive used the correct size hose from the rocker cover but where it joins to the MAF pipe it is smaller diameter so I just slid the smaller part nto the wider end,jubilee clipped together and job done.
Im now sat here wondering if ive overtightened the clip,basically strangling it?
Image
User avatar
andyp
True Old Skooler
Posts: 6899
Joined: Sun Jan 09, 2005 11:00 pm
Location: LONDON

Post Thu May 10, 2012 6:55 pm

i cant see how the engine is now foooked by her going to asda in it, maybe its time to listen to Brianmooore
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu May 10, 2012 7:02 pm

eko wrote:witched it off I removed the oil filler cap.Loads of pressure was released with an almighty whoosh
This is the straw I'm clutching at. Why would there be pressure in the crankcase after the engine has stopped? It should have a path to leak out via the breather pipe on the cam cover, into the big air pipe, through the MAF, the air filter and into the air.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 7:05 pm

andyp wrote:i cant see how the engine is now foooked by her going to asda in it, maybe its time to listen to Brianmooore
Ive checked for blockage as Brian suggested.
Rocker cover outlet clear,MAF pipe clear.
The bodged hose inbetween is the only restriction which is next on the cards!
Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 7:07 pm

Brianmoooore wrote:
This is the straw I'm clutching at. Why would there be pressure in the crankcase after the engine has stopped? It should have a path to leak out via the breather pipe on the cam cover, into the big air pipe, through the MAF, the air filter and into the air.
Which would explain this....
I just slid the smaller part nto the wider end,jubilee clipped together and job done.
Im now sat here wondering if ive overtightened the clip,basically strangling it?
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu May 10, 2012 7:15 pm

eko wrote:Crankcase pipe removed and no signs of any blockages.
I read this as though you checked the pipe for blockages, best get it checked out if not :D
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu May 10, 2012 7:16 pm

Run the engine with the breather pipe off at the cam cover. If large quantities of gas come out, then the engine is goosed.
You (in theory) need to block off the breather pipe, but if the engine idles properly with it open, then it confirms it's blocked.
You could also blow in the oil filler hole with the engine off, and confirm that air comes out of the breather hole on the cam cover
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Thu May 10, 2012 7:48 pm

The quickest test is to run the engine with the dipstick removed - that's enough to allow the engine to breathe and establish whether it's really knackered. The classic signs of shagged bores/rings are when the engine breathes horrid oily smoke from the dipstick tube or when the oil filler cap is removed. I'd be surprised if this engine is shagged tbh.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 7:59 pm

DanThe wrote:
eko wrote:Crankcase pipe removed and no signs of any blockages.
I read this as though you checked the pipe for blockages, best get it checked out if not :D
I did pull it off earlier and blew through no problem.
The way ive bodged the 2 together though reduces the ID from what should be around 25-30mm down to around 10mm.Thing is if ive overtightened that jubilee itll still breathe but with major restriction.
Image