Centre Cap modifying with lock

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
lukec88
E30 Zone Regular
E30 Zone Regular
Posts: 286
Joined: Mon Jun 29, 2009 11:00 pm
Location: Northamptonshire

Post Sat May 05, 2012 9:21 pm

hi guys i am going to be refurbishing my original sport alloys and centre caps soon and will not be the original silver. just wondering if any of you have a way of making the centre caps more secure so they dont get stolen because they are far too expensive to keep replacing and getting sprayed also..

thanks

Luke
Image
Diamond Schwartz black 1989 325I Sport MTech 2.
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sat May 05, 2012 9:22 pm

im sure wed all have it if ther was a decent way

why oh why was it not done when originaly designed :o
User avatar
lukec88
E30 Zone Regular
E30 Zone Regular
Posts: 286
Joined: Mon Jun 29, 2009 11:00 pm
Location: Northamptonshire

Post Sat May 05, 2012 9:25 pm

i have heard of an idea to drill through and drill and tap into the alloy and put a bolt in there that sits flush to the alloy so at least someone nicking them will need a socket set...
Image
Diamond Schwartz black 1989 325I Sport MTech 2.
User avatar
lukec88
E30 Zone Regular
E30 Zone Regular
Posts: 286
Joined: Mon Jun 29, 2009 11:00 pm
Location: Northamptonshire

Post Sat May 05, 2012 9:26 pm

Image

or get hold of some of these bolts and do the same and get the proper key to go with it too
Image
Diamond Schwartz black 1989 325I Sport MTech 2.
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Sat May 05, 2012 9:29 pm

It would work, but it would also look crap.

The metal cap and hidden fixing method is what sets the real deal apart from imitations.

Just a shame the country is full of thieving scum.
cheers,

harry
User avatar
lukec88
E30 Zone Regular
E30 Zone Regular
Posts: 286
Joined: Mon Jun 29, 2009 11:00 pm
Location: Northamptonshire

Post Sat May 05, 2012 9:33 pm

i know but i would rather have it looking a tiny bit worse than keep costing me to replace and respray. the wheel spokes and centre caps are going body coloured anyway so the bolts being black wouldnt stand out much tbh
Image
Diamond Schwartz black 1989 325I Sport MTech 2.
User avatar
lukec88
E30 Zone Regular
E30 Zone Regular
Posts: 286
Joined: Mon Jun 29, 2009 11:00 pm
Location: Northamptonshire

Post Sat May 05, 2012 9:37 pm

http://www.ebay.co.uk/itm/GENUINE-RENAU ... 925wt_1037

depending how long these are this could work....
Image
Diamond Schwartz black 1989 325I Sport MTech 2.
sunnyr83
E30 Zone Addict
E30 Zone Addict
Posts: 2286
Joined: Fri Jun 05, 2009 11:00 pm
Location: West London 'init'

Post Sat May 05, 2012 10:46 pm

Nothing will work without ruining the look of the cap.

If the teefs want them, they'll get em!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat May 05, 2012 10:46 pm

They are shite, common that the key breaks when trying to remove the bolt.
Just take the caps off if you are having to leave the car for lengths of time in car parks, its the only way. Even if you try to secure them the chances are some prick will get a screwdriver behind them and cause even more damage
sunnyr83
E30 Zone Addict
E30 Zone Addict
Posts: 2286
Joined: Fri Jun 05, 2009 11:00 pm
Location: West London 'init'

Post Sat May 05, 2012 10:48 pm

Slow them down by pasting the cap in clear oil or something...


Unless they have the spanner tool.
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Sat May 05, 2012 10:58 pm

Move to a more civilised country, 12 years and I haven't lost a cap yet 8)
Image

E30 zone - promoting adult illiteracy since 2004
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Sat May 05, 2012 11:01 pm

lukec88 wrote:http://www.ebay.co.uk/itm/GENUINE-RENAU ... 925wt_1037

depending how long these are this could work....
they won't work there's a wide hollow space behind the cap,

I have seen a small screw used before that goes through the nut part into the backing plate, it was discreet but noticable
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Sat May 05, 2012 11:04 pm

Just whack some silicone around the edge. It'll be a pain when you want to remove them but would probably deter most would be thieves.
Image

E30 zone - promoting adult illiteracy since 2004
User avatar
lukec88
E30 Zone Regular
E30 Zone Regular
Posts: 286
Joined: Mon Jun 29, 2009 11:00 pm
Location: Northamptonshire

Post Sat May 05, 2012 11:10 pm

e30topless wrote:
lukec88 wrote:http://www.ebay.co.uk/itm/GENUINE-RENAU ... 925wt_1037

depending how long these are this could work....
they won't work there's a wide hollow space behind the cap,

I have seen a small screw used before that goes through the nut part into the backing plate, it was discreet but noticable
thats why i said depending how long they are.. to see if they would clear the void before screwing in..
Image
Diamond Schwartz black 1989 325I Sport MTech 2.
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Sat May 05, 2012 11:17 pm

Some of these with a stand-off underneath to allow them to be tightened down?
http://www.ebay.co.uk/itm/6-X-12-ST-STE ... _538wt_825
Not impossible to get past by any means but it'll reduce the risk
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sun May 06, 2012 7:32 pm

chances are- if in a car park/public parking whilst not at home where car will only be there the once for a few hours/a day, then a tool required bolt that anyone can undo with the correct tool, then that stops the opportunist who owns an e30 :? , but when at home/regular parked, anyone wanting them will just come back with the tool and unbolt
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Sun May 06, 2012 8:11 pm

i'd modify the all plastic e34 ones to fit then melt some razor blades in to the nut part.

you'll get the coonts dna winkeye
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)