I have a choice of a few different manifolds/systems at the moment for an M20. I've been looking back through old posts etc. As far a I can find, there is only one "before and after" dyno graph been done for an original BTB that showed something like 10-15 brake improvement. Also one for the Hottuning that showed a couple of brake difference. Everything else seems to be hearsay and stories from bloke down the pub, and some quick 327s had them so they must be the best. The BTB3 manifold looks significantly different to the earlier one to clear the E36 rack. Has anybody from the latest group buy actually done a before and after dyno run? It looks pretty sad, and if it didn't have a BTB badge on it and the BTB price it would very likely be slated as cheap tat.
In short - is the evidence base for the "mighty BTB" just the one dyno run from a few years ago?
Photos here
http://www.e30zone.net/modules.php?name ... c&t=219281
M20 six branch manifolds - again
Moderator: martauto
-
Brian28
- E30 Zone Squatter

- Posts: 1596
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Bournemouth
For sale - E30 320i racer project - sold.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Brian28
- E30 Zone Squatter

- Posts: 1596
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Bournemouth
Thanks. What I'm asking really is where the "proven power gains" from the BTB3 have actually been proven, as I can't find squat?
For sale - E30 320i racer project - sold.
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
I have never driven an e30 with BTB, how ever I'm curious what you mean by they look a bit sad?
I have a zoners btb3 in my garage and I have to say, the quality is second to none
I have a zoners btb3 in my garage and I have to say, the quality is second to none
-
Brian28
- E30 Zone Squatter

- Posts: 1596
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Bournemouth
The angle of the bends on no 2 cylinder
For sale - E30 320i racer project - sold.
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
MY dyno print out is not the only one!Brian28 wrote:In short - is the evidence base for the "mighty BTB" just the one dyno run from a few years ago?
For a start, mine was dyno'd on two different ones on the same day and i have print outs for both.
Also, there was a white 325i sport in Total BMW mag in 2006 with a dyno print out with the BTB2 on a standard engine giving similar results.
The BTB2 is proven!
-
Brian28
- E30 Zone Squatter

- Posts: 1596
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Bournemouth
Not saying it was the only one, but it was the only one I could find after a while searching on here and google. Was yours the BTB1 or 2? How about the BTB3? Not trying to be argumentative, genuinely interested. It seems to be a top dollar system without a lot of dyno back up, particularly the latest one that has the odd bends to get around the E36 rack. Anybody got links to any other before/after graphs?
For sale - E30 320i racer project - sold.
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
I got 10bhp from my btb3 and single 2.5" back exhaust, dynoed at the same place before and after, however with my lpg mixer inlet restriction the gains were always going to be restricted.
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Mine is a BTB2 and the other one in Total BMW mag i mentioned was also a BTB2.
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
I'll try and have a look at cylinder 2 tomorrow but I can't remember seeing anything sharp enough that would cause flow problems.
It does seem a very well though out system, pre bent pipes or not
It does seem a very well though out system, pre bent pipes or not
-
Brian28
- E30 Zone Squatter

- Posts: 1596
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Bournemouth
Thanks e301988325i. Every car is different, but at face value and on very limited sampling it looks then like the development BTB3 makes at least five brake less than the BTB2. Still, 10 brake improvement is still an improvement 
For sale - E30 320i racer project - sold.
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
I haven't been on for a while, my car has a restricted inlet limiting any gains, without the restriction, HP before and after would be higher and the gains would also be higher, does that make sense? My car's struggling to get anough air in the first place, not with backpressure.Brian28 wrote:Thanks e301988325i. Every car is different, but at face value and on very limited sampling it looks then like the development BTB3 makes at least five brake less than the BTB2. Still, 10 brake improvement is still an improvement
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
