advice on best m42 engine performance mods

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

walrus1968
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Sat Jan 14, 2012 11:00 pm
Location: Seaham Co.Durham

Post Wed May 02, 2012 8:07 pm

hello troops

ive spent the last few days researching mods for this m42 engine i got in my 318is. they seem very limited to modding for performance.

Im trying to weigh up the pros, cons and costings of either.

1. modding my existing m42 engine as its sweet as a nut a cracking engine

2. dropping a m50/m52 into it

I would love to have your expert opinions/advice on this. Please could you guys post me some advice and details of what to buy and where to buy the mods for the m42 and also the approx costings and advice on a m50/52 engine implant.

i have read a lot of info but i would really appreciate some of your thoughts and advice.

thank you in advance

fat gaz the walrus :D :D
318isPMK
E30 Zone Camper
E30 Zone Camper
Posts: 1499
Joined: Tue Jan 10, 2012 11:00 pm

Post Wed May 02, 2012 8:15 pm

Go to the breakers and steal some more power? :)
Image
walrus1968
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Sat Jan 14, 2012 11:00 pm
Location: Seaham Co.Durham

Post Wed May 02, 2012 8:20 pm

318isPMK wrote:Go to the breakers and steal some more power? :)
pmsl...yeah that was a right hoot that thread last week about the stealing and that...lets not go down that route pls lol :D :D :D
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Wed May 02, 2012 8:30 pm

Lightweight flywheel (M20 shaved down is cheapest option i think) and a proper remap is about the best thing you can do with the M42 withough throwing stupid amounts at it.

I fitted an ally flywheel and M50 clutch to my old iS and it made a huge improvement with no detriment to the driveability.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
walrus1968
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Sat Jan 14, 2012 11:00 pm
Location: Seaham Co.Durham

Post Wed May 02, 2012 8:35 pm

Kedge wrote:Lightweight flywheel (M20 shaved down is cheapest option i think) and a proper remap is about the best thing you can do with the M42 withough throwing stupid amounts at it.

I fitted an ally flywheel and M50 clutch to my old iS and it made a huge improvement with no detriment to the driveability.
when you say remap is that one of these chips you can get to shove in the ecu...you can get them off egay but i just dont want to buy as im clueless when it comes to modding these engines
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Wed May 02, 2012 8:51 pm

the old school way was advancing the timing by 6 degrees on the cams. Big bore throttle body and chip. M40 flywheel and clutch is also an option like the very early 89 built cars had before the dual mass flys where factory fitted instead
walrus1968
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Sat Jan 14, 2012 11:00 pm
Location: Seaham Co.Durham

Post Wed May 02, 2012 8:54 pm

Simon13 wrote:the old school way was advancing the timing by 6 degrees on the cams. Big bore throttle body and chip. M40 flywheel and clutch is also an option like the very early 89 built cars had before the dual mass flys where factory fitted instead
ill look into these suggestions thank you. Big bore throttle body and chip??? Maybe yo could elaborate on those please , what chip? what engine would i get a big bore throttle body from please.

thank you
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Wed May 02, 2012 9:01 pm

you don't get another tb, you get your one enlarged and a bigger disc fitted. Chip? not many did them as the 318iS use 3 different engine ECU's so one chip which works in one won't in another. Which makes it hard!
318isPMK
E30 Zone Camper
E30 Zone Camper
Posts: 1499
Joined: Tue Jan 10, 2012 11:00 pm

Post Wed May 02, 2012 9:03 pm

Think speedtouch on here does the chips... leave it as is IMO and dont change the engine 318iS are rarer than 325's if you want a fast 318iS your as well as fook about with a 325...

But Im not much of a mechanic just think they each have a purpose
Image
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Wed May 02, 2012 9:07 pm

I've had 2 1990 built iS' and both had an M40 flywheel, i never heard anyone in the UK having one of the dualmass flywheels, they only seem to crop up on yank ones as far as i've seen.

Kos got really good result from a proper live remap rather than just a plug in chip, as Simon says they are a bit of a minefield in getting the right chip for your ECU.

BBTB seemed to have a good rep a few years ago but now everyone says they don't add anything, no idea myself. There used to be people out there who sold them on an exchange basis but seem to have disappeared over the years.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
walrus1968
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Sat Jan 14, 2012 11:00 pm
Location: Seaham Co.Durham

Post Wed May 02, 2012 9:34 pm

all very good advice...thank you...the thing is ive got a 325 m20 in my baur and although i really like this m42 engine im already missing the pwer that my baur delivers. I really like the fuel economy of the m42 though as im getting nearly double the mpg that im getting from my baur.

I dont really want to mess about with it tbh as the engine obviosly has been looked after and is sweet but i just feel it lacks that little bit power and defo dosnt put as big of a smile on my face as the baur does.

my firsr intention was to put a m52b28 in it but it would be a real shame to bastardize such a clean and good example of a 318is as this is.
Image


KEEPING MY "BLURRED PIXELS" TO THE MAX !!! :)
suchy
True Zone Relic
Posts: 6604
Joined: Tue Apr 26, 2005 11:00 pm
Location: Portsmouth

Post Wed May 02, 2012 10:38 pm

Do I recall a mag feature a few years back where they fitted vernier pulleys and adjusted them both differently and fitted a couple of bolt on goodies (+ remap I'd imagine) and dyno'd @160hp...??
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Wed May 02, 2012 10:51 pm

Forget playing with the poxy old 4 pot, your just plsslng in the wind, M52B28 and never look back 8)
walrus1968
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Sat Jan 14, 2012 11:00 pm
Location: Seaham Co.Durham

Post Wed May 02, 2012 11:19 pm

DanThe wrote:Forget playing with the poxy old 4 pot, your just plsslng in the wind, M52B28 and never look back 8)
if i keep the baur...i will be fitting one if possible but im not keen on fooking this 318is up with a engine change...its just too sweet to engine rape.
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Wed May 02, 2012 11:26 pm

walrus1968 wrote:
DanThe wrote:Forget playing with the poxy old 4 pot, your just plsslng in the wind, M52B28 and never look back 8)
if i keep the baur...i will be fitting one if possible but im not keen on fooking this 318is up with a engine change...its just too sweet to engine rape.
Crikey an M52 Baur! :mad:
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
walrus1968
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Sat Jan 14, 2012 11:00 pm
Location: Seaham Co.Durham

Post Thu May 03, 2012 12:14 am

Duke137 wrote:
walrus1968 wrote:
DanThe wrote:Forget playing with the poxy old 4 pot, your just plsslng in the wind, M52B28 and never look back 8)
if i keep the baur...i will be fitting one if possible but im not keen on fooking this 318is up with a engine change...its just too sweet to engine rape.
Crikey an M52 Baur! :mad:
well its quick now witha m20 2.5 in it...will be fun at the drag strip with a m52b28 in it.
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Thu May 03, 2012 11:34 am

I had a Viper chip, k&n panel filter and bbtb and she was just shy of 147hp. The bbtb is debatable in giving a performance increase! There was another guy at the dyno that day with a stock m42 with evolve/zone chip and he got a hair over 150hp.

I've driven Kedges old iS when a mate owned in here in Ireland, it was quite different to my m42, in a good way! Light flywheel, ecu remap would be what I'd do if I hadn't decided on upgrading to a M52 :D
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Post Thu May 03, 2012 1:22 pm

walrus1968 wrote:
DanThe wrote:Forget playing with the poxy old 4 pot, your just plsslng in the wind, M52B28 and never look back 8)
if i keep the baur...i will be fitting one if possible but im not keen on fooking this 318is up with a engine change...its just too sweet to engine rape.
Not really fooking the iS with it.

If I were you and I didn't need the capital from selling the m42, I would remove it, store it, stick an m52 in and enjoy having a fastish car. Then if you decide to sell, you have the option of selling it with the m42 or the m52 depending on what is more valuable.

To do an m52 properly, you are looking around the £2k mark. Can be done for cheaper but there are a lot of "while I'm here" type jobs you will end up doing if you want a proper job.

Don't get me wrong, m42's are great once you get them on song, but for those days when you want a quick drive without having to keep it buzzing, you can't beat a 6 pot
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Thu May 03, 2012 2:40 pm

what you got now Gary :D
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Thu May 03, 2012 7:22 pm

Jozi wrote: I've driven Kedges old iS when a mate owned in here in Ireland, it was quite different to my m42, in a good way!
:cool: What did you think to it?

Really should have chipped it, no idea why i never got round to it. Was about all that car needed.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Thu May 03, 2012 7:31 pm

Umm... I stalled it reversing :o: It was ages ago when Richard still had her, from what I remember the engine was more responsive, car rode differently to my own (she was nice) but I can't comment if it was any faster than my touring (should have been with less mass to pull).
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Thu May 03, 2012 8:16 pm

If your engine is in good condition a proper rolling road remap should get you near 150 bhp.

If you want more than that, fit a bigger engine.
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Thu May 03, 2012 11:14 pm

Turbo! :cool:
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Thu May 03, 2012 11:26 pm

Kedge wrote: Kos got really good result from a proper live remap rather than just a plug in chip
thats right, i did.

while the figures were probably quite optimistic the car did improve after a proper re map.

a lightened flywheel would have been my next mod, but i sold the car before i had a chance.
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Fri May 04, 2012 8:35 am

Turbo! :cool:
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Fri May 04, 2012 9:54 am

i had an evolve chip in mine and a lightened m20 flywheel it gave 152 bhp on the rollers and with the flywheel mod it was fun to drive but your alway's stirring the box to find the poowah band .

it would put the shits up 325i owners and lashed any other m42's it came across.

24v ftw! :D
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)