Would a front valance from a early 1985 car fit on my late 86 without much trouble? There seem to be two diffrent front sections for pre-facelift cars , just wonderign if both will fit.
Also , would a facelift front valance fit on a pre-facelift car without too much trouble?
Front Valance fitting / interchanging
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
The changeover date for the facelift is September 1987, so there should be no difference between '85 and '86 valances.
As for putting facelift parts on a pre-facelift, have a read of this:
http://www.e30zone.net/e30zonewiki/inde ... a_facelift
As for putting facelift parts on a pre-facelift, have a read of this:
http://www.e30zone.net/e30zonewiki/inde ... a_facelift
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
GooneriC
- E30 Zone Regular

- Posts: 304
- Joined: Wed Jun 22, 2011 11:00 pm
- Location: Barbados
Well on schmiedmann i am seeing two different Valances. They list one pre-09/1985 , and then a different one for 09/85 - 1987 .. my car currently has the latter , while the breaker i am looking at here has the one they show as pre-85. Here's the link :
http://www.schmiedmann.com/3_series/E30 ... 7.htm#2958
Can someone clarify for me please?
http://www.schmiedmann.com/3_series/E30 ... 7.htm#2958
Can someone clarify for me please?
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
It's to do with the cut-outs for the radiator/air-con/oil cooler, as far as I'm aware. The physical outline, bolt holes and cutouts for the bumper mounts should all be the same.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
The pre 85 one valance is a 2 piece, and rare to get hold of.
The post 85 is a single piece.,
The post 85 is a single piece.,

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
GooneriC
- E30 Zone Regular

- Posts: 304
- Joined: Wed Jun 22, 2011 11:00 pm
- Location: Barbados
Ahh cool, just wanted to be certain.. this guy over here has at wo piece one and its mint , comes with a front lip too.
-
clipper
- E30 Zone Squatter

- Posts: 1980
- Joined: Mon Aug 22, 2005 11:00 pm
- Location: Madrid
There are two different pre-facelift valences.
The early pre (known over here as the pre-pre) has a shorter side profile so won't fit on a later "pre" car.
Don't know anything about them being in 2 pieces though, thats a new one on me...
The early pre (known over here as the pre-pre) has a shorter side profile so won't fit on a later "pre" car.
Don't know anything about them being in 2 pieces though, thats a new one on me...
These are sensations as hard to forget as they are to ignore.....
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
clipper
- E30 Zone Squatter

- Posts: 1980
- Joined: Mon Aug 22, 2005 11:00 pm
- Location: Madrid
Ah right. So it is, assuming that's the pre-pre version.
These are sensations as hard to forget as they are to ignore.....
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Fitted to the early E30 323i's

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
GooneriC
- E30 Zone Regular

- Posts: 304
- Joined: Wed Jun 22, 2011 11:00 pm
- Location: Barbados
Thats the one , its the valance plus the extra piece and the one i saw comes with a bottom rubber lip as well.

