Mine snapped its cambelt months back, and it's time to haul it out of the engine bay. But I haven't got the space to store a fat lump like that, so I want to know what's worth saving, flogging and weighing in. It'll be replaced by an M20B25, so spares will be handy
So far I've got:
SAVE:
Alternator, ICV, TPS, CPS, Blue temp sensor, dizzy and HT leads, rocker cover, sump, starter, FPR
SELL:
Injectors and rail, AFM
SCRAP:
Block, Head (since it's got bent valves), flywheel, intake manifold, throttle body
Sound about right?
What's worth stripping off an M20B20?
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
Could the flywheel and clutch be used on an m52 conversion or does it have to be the 325i one? And maybe the front pulley if its a newer engine management system. Purely to sell on.
Just thinking out loud
Just thinking out loud
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Save the conrods for a 2.8 build 
-
makman
- E30 Zone Regular

- Posts: 361
- Joined: Thu Oct 13, 2011 11:00 pm
save the flywheel clutch and starter for an m50 or 52! got my old m20b20s on mine and i larv um!
Canny Beat a chromie!'


-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Flywheel and starter would be perfect for a 24v conversion. If the clutch is mint then sell it all as a set. If you have the flywheel lightened at a machine shop then it will become a very desirable set upjohnl320 wrote:Could the flywheel and clutch be used on an m52 conversion or does it have to be the 325i one? And maybe the front pulley if its a newer engine management system. Purely to sell on.
Just thinking out loud

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Unfortunately, I don't have the time, space or money for an M52 swap
And these things are so cheap that I can buy more conrods in a few years time if I wanted to.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Silverfang
- E30 Zone Regular

- Posts: 937
- Joined: Fri Dec 23, 2005 11:00 pm
- Location: Northampton
Save the rods as above, sell as a set for anyone wanting a 2.8 conversion
Flywheel, Clutch and starter for anyone wanting an M50/52 conversion, or want a lightend flywheel for their M20, lightened to 6kg wakes them up a lot!
Flywheel, Clutch and starter for anyone wanting an M50/52 conversion, or want a lightend flywheel for their M20, lightened to 6kg wakes them up a lot!
BMW and Opel, both RWD, both german, both good fun
http://www.clockservicing.co.uk/ For any clock repairs try here.
http://www.clockservicing.co.uk/ For any clock repairs try here.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
sumps worth saving also
The head will be ok i expect, how badly bent are the valves?
The head will be ok i expect, how badly bent are the valves?
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
I haven't taken the head off yet; the belt snapped at idle, but I cranked the engine over a few times afterwards so I'm sure a few valves have taken a fair clout.
Seems like the block with crank and pistons is worth about 40-50 quid over here, so I'll pull the whole lot with gearbox, then get the gearbox off, then the flywheel and clutch, then the head off and try and sell them each individually. Whatever doesn't sell on Polish eBay gets scrapped
The sump has been repaired in the past, so that'll be set aside as a spare.
Seems like the block with crank and pistons is worth about 40-50 quid over here, so I'll pull the whole lot with gearbox, then get the gearbox off, then the flywheel and clutch, then the head off and try and sell them each individually. Whatever doesn't sell on Polish eBay gets scrapped
The sump has been repaired in the past, so that'll be set aside as a spare.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install

