Since I have my wee list of chores to do on the cabby to get it through the MOT it was time tonight to get my finger out and crack on.
After what ended up being a totally painless 2 hours I managed to get the car up in the air on stands, front struts off the car and partially stripped, power steering belt off, split steering rack gaiter removed, and a whole bunch of bits out the way to tackle the timing belt.
For once a result, mostly thanks to the WIKI and past advice on here its been a doddle. Not one seized or rounded off nut or bolt.
For me that's a total result as I am far and away from being a mechanic.
Fingers crossed it all goes back together again as easily.
For once and evening well spent
Moderator: martauto
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
good work m8,that's the spirit keep it up and you'll beat the 'krout' into submission

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
grantfk10
- E30 Zone Meets/Events Team

- Posts: 2926
- Joined: Mon Jan 17, 2005 11:00 pm
- Location: UFOland, Central Scotland
Well done, hope it's all coming together for you ;)
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
It makes a nice change, some of the other jobs over the last 18 months have been a total nightmare.
-
Jos
- E30 Zone Camper

- Posts: 1104
- Joined: Mon Jan 17, 2005 11:00 pm
- Location: Belfast
it's nice when you get a wee run like that, can be soul destroying spending 2 hours getting a nut or bolt off! (or removing a waterpump housing bolt from a bloody Peugeot with a snapped stud extractor in it)!
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
'94 e36 tree climber
-
Mo13
- E30 Zone Regular

- Posts: 722
- Joined: Tue Apr 03, 2012 11:00 pm
- Location: East London
GEED JOB MATE! looking to do it myself in a few weeks anything you can pass over?
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
^^ Anything in particular?
-
Mo13
- E30 Zone Regular

- Posts: 722
- Joined: Tue Apr 03, 2012 11:00 pm
- Location: East London
pictures maybe? just to get to the timing belt.....
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Theres a good guide in the wiki that I have been following:
http://www.e30zone.net/e30zonewiki/inde ... elt_Change
http://www.e30zone.net/e30zonewiki/inde ... elt_Change
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
The fun bit with the cambelt is starting it after you've changed it for the first time!
Within 10 seconds you then realise that it was actually a remarkably simple job, & you won't be worried at all next time!
Just make sure you check things properly before you turn the key...
Within 10 seconds you then realise that it was actually a remarkably simple job, & you won't be worried at all next time!
E30 in need of wiring loom smoke since April '11...

