help help help help

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
skooshy
E30 Zone Newbie
E30 Zone Newbie
Posts: 100
Joined: Thu Sep 30, 2010 11:00 pm
Location: fife

Post Fri Apr 27, 2012 8:20 am

on the way to work this moring and the car desided to spit the dummy

really sounds like no compression and a bit of a chap witch sounds like ive snapped a con rod.....

my engine is the m20 325i face lift.....

so i dont suposse any 1 got a engine for 1 up in scotland ???????????

any help asap would be help full thanks,..... :cry:
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Fri Apr 27, 2012 8:49 am

Give cecotto479 a PM he might have one he is in Hamilton so not a million miles away from you.
318isPMK
E30 Zone Camper
E30 Zone Camper
Posts: 1499
Joined: Tue Jan 10, 2012 11:00 pm

Post Fri Apr 27, 2012 12:36 pm

+1 on Boyd I had a similar issue and he completely sorted it. PM me for his number if ur interested
Image
User avatar
skooshy
E30 Zone Newbie
E30 Zone Newbie
Posts: 100
Joined: Thu Sep 30, 2010 11:00 pm
Location: fife

Post Sat Apr 28, 2012 7:09 pm

found out what went wrong tensioner gave way and i bent 10 valves and snapped a rocker....

another question though i have another head with a bent valve in to and a pushed out valve seat could i use the valves out that head to pit in my one with the bent valves?????
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Post Sat Apr 28, 2012 7:47 pm

M20 only has 8 valves?
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Sat Apr 28, 2012 7:52 pm

Rtaylor2208 wrote:M20 only has 8 valves?
6 pot, 2 valves per cylinder :D
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Sat Apr 28, 2012 7:53 pm

m20 has 12v's
m40 has 8v's
m42 has 16v's
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Sat Apr 28, 2012 8:00 pm

skooshy wrote:found out what went wrong tensioner gave way and i bent 10 valves and snapped a rocker....

another question though i have another head with a bent valve in to and a pushed out valve seat could i use the valves out that head to pit in my one with the bent valves?????
In theory yes, but you would need a proper head rebuild. The head casting would need to be checked, then all the valves reseated and a skim at the very least.

Have you had a chance to look at the head off, and the piston tops?
User avatar
skooshy
E30 Zone Newbie
E30 Zone Newbie
Posts: 100
Joined: Thu Sep 30, 2010 11:00 pm
Location: fife

Post Sat Apr 28, 2012 8:09 pm

maggspower wrote:
skooshy wrote:found out what went wrong tensioner gave way and i bent 10 valves and snapped a rocker....

another question though i have another head with a bent valve in to and a pushed out valve seat could i use the valves out that head to pit in my one with the bent valves?????
In theory yes, but you would need a proper head rebuild. The head casting would need to be checked, then all the valves reseated and a skim at the very least.

Have you had a chance to look at the head off, and the piston tops?
yeah mate took head off the day piston tops got a bit of scelp but am going to look at them in more depth the mora....
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Sat Apr 28, 2012 8:16 pm

skooshy wrote:found out what went wrong tensioner gave way and i bent 10 valves and snapped a rocker....

another question though i have another head with a bent valve in to and a pushed out valve seat could i use the valves out that head to pit in my one with the bent valves?????
ouch, mine did that the other week. iv got a few spare bits kickin about if ur struggling. rocker arms, pistons etc
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift