difference between blisten b6 and b8?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
randomspeedfreak
E30 Zone Regular
E30 Zone Regular
Posts: 992
Joined: Mon Mar 15, 2010 11:00 pm
Location: Bristol

Post Fri Apr 27, 2012 3:04 pm

whats the difference between blisten b6 and b8? if any at all

cheers,
Matt
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Fri Apr 27, 2012 4:12 pm

As far as I've read, they're the same in stiffness. B8's are shorter and better suited for lower springs..
E30_Aza
E30 Zone Regular
E30 Zone Regular
Posts: 858
Joined: Sat Mar 04, 2006 11:00 pm
Location: Croydon

Post Sat Apr 28, 2012 1:16 pm

This is what I was told as I went for b8s in the end. But iirc simon13 posted a pic up a whole back showing that the b6 is in fact shorter in length
Image
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Sun Apr 29, 2012 9:00 pm

This one? Although I pulled it off Royalratch's thread.. who pulled it off Simon13.
Royalratch wrote:Aha. I'm afraid it's MTEC or Bilstein as the overwhelming evidence points at one of those set-ups.

Some interesting stuff I nicked from another thread:
Simon13 wrote:B6's where fitted to tech 1's as standard Ratch.

If she's everyday the B4 damper gives a good ride. Looks like an m-tech damper but with a thicker damper rod. I imagine on eibachs it would be a good setup

Personnaly B8's work best on 35/40mm drops and the B6 with 60mm springs (EDIT: Why would a shorter damper work better with longer spring...?)

All the bilsteins bar the B4 are much stiffer than boge/mtech damper
And:
Simon13 wrote:Bought my B6 dampers off the shelf at ECP wembley no problem

Image

This picture here lies all the dampers in question

top boge mtech, it's f**ked and the damper rod isn't fully extented
middle B6 ala tech 1 sport
bottom B8 ala Alpina/hartge

B6's give the hardest ride with any spring, B8's are better, mtechs only good on stock or 40mm springs.
As you can see the B6 is the shortest shock by some way
Barry - B8's will be noticeably stiffer than MTECH / B6 / B4?

Anyone ever used a B4?
E30_Aza
E30 Zone Regular
E30 Zone Regular
Posts: 858
Joined: Sat Mar 04, 2006 11:00 pm
Location: Croydon

Post Sun Apr 29, 2012 9:55 pm

That's the one!
Image