right i have a E30 316i m40 facelift model but i want to change the engine to an m20 325. ive got a donor car which is a full 325 e30 pre facelift.
so before i do all this i just wanted some of you guys on here to give me an idea of things that will be needed to be done to make the engine change a success e.g wiring loom,ecu ect.
thanks.
engine change m40 to m20 need some advise please
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
This has been covered a million and one times; all the info is in the M20 forum 
You may want to consider converting your pre-facelift donor engine to a facelift version, which has better and more reliable engine management. You'll need to source the parts, but it's pretty easy to do, especially in conjunction with an engine swap:
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
You may want to consider converting your pre-facelift donor engine to a facelift version, which has better and more reliable engine management. You'll need to source the parts, but it's pretty easy to do, especially in conjunction with an engine swap:
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
thanks, i shall have a look now.Grrrmachine wrote:This has been covered a million and one times; all the info is in the M20 forum
You may want to consider converting your pre-facelift donor engine to a facelift version, which has better and more reliable engine management. You'll need to source the parts, but it's pretty easy to do, especially in conjunction with an engine swap:
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Youth is wasted on the young.
