car body work prices.
Moderator: martauto
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
I've pretty much fixed everything on my '87 cab now, runs like a dream. The only thing that I need to do is address its rusty scab patches. Its nothing too severe, just a few bits where paint has come off and its rusted, a bit on the very inner rear arches too.
What are the going prices for work like this? Has anyone had stuff like this done recently? If so how much did it cost?
Thanks,
-Mcbonio
What are the going prices for work like this? Has anyone had stuff like this done recently? If so how much did it cost?
Thanks,
-Mcbonio
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
with rust in some places, it often goes beyond what you can see, it all needs taking back-which ruins the paint on the panel, plus whole panels have to be painted you cant just spray dots or small sections, you really need to post pics of whats needed, and really inspect it, particularly them rear arches , if its right in the lip and nothing what so ever on the outside, you could just rub it back then rust treat it (FERTAN-google it) them hand touch up it, with a tin from paints4u.com (£12) , then give it a g3 after 2 weeks to smooth/blend it a bit,rear arch rusting often starts from the inside mind you
all depnds on the quality of the car really and what you want to spend - if your not fussed , and the rear/front panels/bonnet are perfect, you could get it both sides fully rubbed back and re painted, or the whole lot and a re spray
post pics, people will be able to tell you more then
all depnds on the quality of the car really and what you want to spend - if your not fussed , and the rear/front panels/bonnet are perfect, you could get it both sides fully rubbed back and re painted, or the whole lot and a re spray
post pics, people will be able to tell you more then
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
It is impossible to give accurate bodywork prices over the internet, prices seem to vary massively and pictures still hide a lot. Only way is to take it to a few bodywork places in your local area, so really your main question should be asking for recommendations of bodyshops in your ares.
If they are just scabs try grinding them back to bare metal yourself, this will confirm whether they are just scabs or anything more severe. As for the arch, that's probably something that needs chopping out and what you can see might not even be half of it.
If they are just scabs try grinding them back to bare metal yourself, this will confirm whether they are just scabs or anything more severe. As for the arch, that's probably something that needs chopping out and what you can see might not even be half of it.
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Its a 1987 325i cab in lachsilver. Its worth spending the money on as the gearbox and engine have been reconditioned and almost everything on the car i've replaced. It's in great shape.
Its just the inner lips of the rear arches that have gone, looks like stones have chipped the paint on the lip and its began to rust. I might sand them, treat these with kurust, zinc primer and paint, then pack it with Waxoyl.
I've got a young cousin who is an apprentice in a decent bodyshop here in Liverpool, I'm going to swing by tomorrow morning and get a quote hopefully a slightly reduced one for being family.. heres hoping.
Its just the inner lips of the rear arches that have gone, looks like stones have chipped the paint on the lip and its began to rust. I might sand them, treat these with kurust, zinc primer and paint, then pack it with Waxoyl.
I've got a young cousin who is an apprentice in a decent bodyshop here in Liverpool, I'm going to swing by tomorrow morning and get a quote hopefully a slightly reduced one for being family.. heres hoping.
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Doesn't sound too bad but with any rust anywhere on the arches you want to get the doorcards and boot side carpets out and inspect the inners as well........not the easiest of jobs on a cab but worth it for peace of mind.
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Thanks Kedge,
I did the rear arches on my E46, they had bubbled all the way out, had them done in an afternoon and blended in a few days later. Was a very successful job and my first go at bodywork, they looked great. I think it cost me about 80 quid in materials and paint to do it.
I may just bite the bullet and do my e30. I'm just worried about getting a decent match on my Lachsilver paint..! Its a confidence thing really!
I did the rear arches on my E46, they had bubbled all the way out, had them done in an afternoon and blended in a few days later. Was a very successful job and my first go at bodywork, they looked great. I think it cost me about 80 quid in materials and paint to do it.
I may just bite the bullet and do my e30. I'm just worried about getting a decent match on my Lachsilver paint..! Its a confidence thing really!
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
an 87 in lachs silver , sounds nice, put some pics up !
fertan is much better than kurust, google it, its for metal boat use and available at yacht chandlerys if you have one or a marina near
fertan is much better than kurust, google it, its for metal boat use and available at yacht chandlerys if you have one or a marina near
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
I'll have a look for it.! Cheers fella. Here she is, was only taken last month, as you can see the rear arches are perfect apart from the very inner lip, which you can't even see from the photo.


-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
lovely, really like the look of that
have you ever had all the dash and carpets out ?
are the rear inner arches/wheel housings solid ? no rust in the boot behind the carpets on the inner wings or anything ? if youve never done it- mine (1987 same as yours) had hidden rust, abeit only light surface, under the arches on the inside under the sealer, it looked all good and nice but ive taken it back to check and it was starting there, so caught it in time, these are old cars and rust can be lurking and starting in real hidden places, its just being brave enough to hunt for it and catch it before it could get bad, and ensure the cars god for another 20 years !
have you ever had all the dash and carpets out ?
are the rear inner arches/wheel housings solid ? no rust in the boot behind the carpets on the inner wings or anything ? if youve never done it- mine (1987 same as yours) had hidden rust, abeit only light surface, under the arches on the inside under the sealer, it looked all good and nice but ive taken it back to check and it was starting there, so caught it in time, these are old cars and rust can be lurking and starting in real hidden places, its just being brave enough to hunt for it and catch it before it could get bad, and ensure the cars god for another 20 years !
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
heres mine, theyd look super together, although i didnt like the alpina reps so sold them




Last edited by polsta on Thu Apr 26, 2012 1:36 pm, edited 1 time in total.
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
polsta i sooo want a tech1 that looks stunning
totally agree with what the other chaps have said body work is impossible to quote over the net, but definitely get a few different quotes iv found they differ quite alot
totally agree with what the other chaps have said body work is impossible to quote over the net, but definitely get a few different quotes iv found they differ quite alot
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
thanks mate, that was last summer before i took it off the road, i got a nice one but its still needed a fair amount of work, although i decided to go the whole hog and really ensure its solid and restored throughout, im missing driving it and cant wait for the day its finished and back on the road,pics go to show how nice an old e30 can be and still need thousands of pounds spent
lachs silver tech 1s/chromies just look the business i think, i love that cabby
lachs silver tech 1s/chromies just look the business i think, i love that cabby
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Lovin' the Mtech1 Polsta! I was looking for an mtech1 or a cab when I was in the market. Cab popped up first so I got that.
I've had the carpet out, looked behind dash, boot carpet out. All looks solid and good. Its been really looked after, I've had it since January and its rust patches haven't grown any so I don't think its too bad. I've also checked the rear arches with a magnet, they are all still solid metal, so I don't think they've been filled before. Its a low rust e30 if you can believe that.!
I like your pressed metal german style plates, you get them from dubmiester? Ever had any stick from the rozzers over them?
I've had the carpet out, looked behind dash, boot carpet out. All looks solid and good. Its been really looked after, I've had it since January and its rust patches haven't grown any so I don't think its too bad. I've also checked the rear arches with a magnet, they are all still solid metal, so I don't think they've been filled before. Its a low rust e30 if you can believe that.!
I like your pressed metal german style plates, you get them from dubmiester? Ever had any stick from the rozzers over them?
-
E30_KIID
- E30 Zone Regular

- Posts: 444
- Joined: Sat Sep 26, 2009 11:00 pm
- Location: East
Car body work is the same as everything else, you get what you pay for. The range is price can be anything from pennies to thousands depending on the finish you want and how long you want it to be that way. When it comes down to rust, its like a desease, in small doses it can be treated but anything to big it will need to be cut out and new material put it. After all paint is pourus so there will be rust where the eye can not see. With your car being silver if im honest it hasn't done you any favours, its a bitch to match!! Iv heard of a couple companies nearly doubling estimations due to the car being silver
who ever your car goes to, i hope they do a good job. Get some pictures up when its done!
Vintage BMWs are an addiction.
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
super mate, you should waxoil it all as much as possible in every nook and cranny and inside the doors and rear door cards and everywhere like that and go to town
yeah they are pressed german, real good quality ones and better than ones i got for my is from someone on ebay, but they were done by the previous owner, so i have no idea where he got them from, only drove it around for a few months before garaging it but never got any aggro from the fuzz,i dont think i ever got pulled over in the car
when its back on the road, i want original dealer plates made up and tax holder, just for that real original flavour
yeah they are pressed german, real good quality ones and better than ones i got for my is from someone on ebay, but they were done by the previous owner, so i have no idea where he got them from, only drove it around for a few months before garaging it but never got any aggro from the fuzz,i dont think i ever got pulled over in the car
when its back on the road, i want original dealer plates made up and tax holder, just for that real original flavour
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
^^ sound advice there
you can see how nice mine looked paint wise, it didnt "need" a full re spray, but with new rear inner and outer arches/whole quaters need re painting, new rear panel, and all of boot being re painted inside
then that leads to the quaters having to be blown in to the doors, there were a couple of very minor blemishes to the roof , and a couple on the bonnet ,and the kit was ok but a re paint would be better, it then lads me to say f**k it a full re spray would be better, to save any silver matching issues
and being a 25 year old car- its never going to match perfectly
but on them rear arch inner lips, you can hardly see it- on my old is i did that, little rub down in there and remove any flaky bits etc, fertan, touch up paint, it was sorted then and did it myself, but also was handy with the car being black
you can see how nice mine looked paint wise, it didnt "need" a full re spray, but with new rear inner and outer arches/whole quaters need re painting, new rear panel, and all of boot being re painted inside
then that leads to the quaters having to be blown in to the doors, there were a couple of very minor blemishes to the roof , and a couple on the bonnet ,and the kit was ok but a re paint would be better, it then lads me to say f**k it a full re spray would be better, to save any silver matching issues
and being a 25 year old car- its never going to match perfectly
but on them rear arch inner lips, you can hardly see it- on my old is i did that, little rub down in there and remove any flaky bits etc, fertan, touch up paint, it was sorted then and did it myself, but also was handy with the car being black
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Yeah I'm going to do the rear arch inner lips myself, and take the rest to a bodyshop, lessen the financial blow a little.!
Cheers for the advice chaps, decent bunch on here.! I'll report back with those quotes.
-Mcb
Cheers for the advice chaps, decent bunch on here.! I'll report back with those quotes.
-Mcb
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
put the quotes up and pics, and go to as many places as you can, ask for a "cash deal" price
bear in mind- body shops will steer you to having more done, and you generaly have to re paint whole panels when there are issues
bear in mind- body shops will steer you to having more done, and you generaly have to re paint whole panels when there are issues
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
lol a "cash deal" price? Never heard of that before.. Please explain.!
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
you give them cash and they charge you less (hopefully) than if you paid by card or cheque 
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Tried that before, really doesn't wash these days. lol
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
seems to go down well in the places i use,
good luck with the body work though looks like lovely cab
good luck with the body work though looks like lovely cab
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
if you clock the right person at the right shop, smaller independant places with the owner also runs and works and sprays there, rather than bigger body shops owned by a company who do mostly insurance work with a manager there who doesnt spray etc
and get chatting ,mention your looking around for prices and speaking to a few places and your just off somewhere else, and say how much for a cash job - most of them will be up for a deal, just means they dont put it through the books and pocket the cash and do it cheaper, where places with employees not in a position to do that, wont/cant
and get chatting ,mention your looking around for prices and speaking to a few places and your just off somewhere else, and say how much for a cash job - most of them will be up for a deal, just means they dont put it through the books and pocket the cash and do it cheaper, where places with employees not in a position to do that, wont/cant
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
What area are you in mate?mcbonio wrote:I've pretty much fixed everything on my '87 cab now, runs like a dream. The only thing that I need to do is address its rusty scab patches. Its nothing too severe, just a few bits where paint has come off and its rusted, a bit on the very inner rear arches too.
What are the going prices for work like this? Has anyone had stuff like this done recently? If so how much did it cost?
Thanks,
-Mcbonio

