What's size are those?bab-91 wrote:Hmm after thinking on it I still prefer the style 15's .ross_jsy wrote: With the throwing star wheel trim on an e30:
Favourite alloys?
Moderator: martauto
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
bab-91
- Married to the E30 Zone

- Posts: 7174
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
16"jmc330i wrote: What's size are those?
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Hmm, off what car?
I got the 15" version (from E34 I think) on my Sport as winter wheels, and yes, mega easy to clean
I got the 15" version (from E34 I think) on my Sport as winter wheels, and yes, mega easy to clean
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
7 Series iirc.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
deep bbs rs or borbets. just anything deep and euro friendly
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
bab-91
- Married to the E30 Zone

- Posts: 7174
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
They are off a Bmw E38 725? I thinkjmc330i wrote:Hmm, off what car?
I got the 15" version (from E34 I think) on my Sport as winter wheels, and yes, mega easy to clean

-
suhinaffy
- E30 Zone Regular

- Posts: 355
- Joined: Tue Jul 06, 2010 11:00 pm
- Location: Fife
Mim 1900's are my favourite E30 alloys.




-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Yup, got em. E38 
Realoem was being slow on my phone.
Hmm, now where do I find a set and do I really need them?? I got the 16x8 style 5s, but these would be ideal for winter use
Realoem was being slow on my phone.
Hmm, now where do I find a set and do I really need them?? I got the 16x8 style 5s, but these would be ideal for winter use
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
pony
- I have been misbehaving and am sorry !
- Posts: 6620
- Joined: Sat Feb 11, 2006 11:00 pm
- Location: London
I got to say the original BMW 15 inch BBS alloys for me looks the best
.
Those E36 M3 Evo alloys dont suit a E30 IMO.
Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre?
Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION
Example:
http://media.photobucket.com/image/Pors ... rsche1.jpg
Those E36 M3 Evo alloys dont suit a E30 IMO.
Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre?
Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.
Turbines have the advantage of brake cooling
Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION
Example:
http://media.photobucket.com/image/Pors ... rsche1.jpg
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
macas wrote:Them splitty hartge rimzzzz that rav has(thats the best description i can give,dont know model numbers!)



If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
What E36 Evo alloys?pony wrote:I got to say the original BMW 15 inch BBS alloys for me looks the best.
Those E36 M3 Evo alloys dont suit a E30 IMO.
Turbines were M5 only, Throwing stars were E31 also.pony wrote:Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre?![]()
The Turbines/Throwing stars draw air into the wheel yes.pony wrote:Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.
Turbines have the advantage of brake cooling
Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION
Example:
http://media.photobucket.com/image/Pors ... rsche1.jpg
-
bab-91
- Married to the E30 Zone

- Posts: 7174
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
I got mine on the german bay and nobody "NEEDS" a spare set. I got mine because I was planning on putting snow tyres on them for going to Austriajmc330i wrote:Yup, got em. E38
Realoem was being slow on my phone.
Hmm, now where do I find a set and do I really need them?? I got the 16x8 style 5s, but these would be ideal for winter use
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
Yes, that is why they are rare.pony wrote: Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre?![]()
pony wrote:Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.
Turbines have the advantage of brake cooling
Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION
Example:
http://media.photobucket.com/image/Pors ... rsche1.jpg

Notice the black fan blade?
The throwing start wheel trims don't feature the fan. While not as efficient as the turbine covers they do still produce a suction effect.
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
pony wrote:I got to say the original BMW 15 inch BBS alloys for me looks the best.
Those E36 M3 Evo alloys dont suit a E30 IMO.
Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre?![]()
Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.
Turbines have the advantage of brake cooling
Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION
Example:
http://media.photobucket.com/image/Pors ... rsche1.jpg

And they're side specific so lh fans and covers are angled the opposite way to the rh.
Throwing stars don't give as much of a cooling effect, but they are lighter, and again side specific so you get the same cooling effect on both sides. Which is one way to spot replicas as the spokes on all 4 wheels will face the same way.
The turbines were only used on the early 3.6 m5s, and we're soon changed for the throwing star design as a lot of people didn't really like the hubcap looks. Personally, that's why I love them!
cheers,
harry
harry
-
pony
- I have been misbehaving and am sorry !
- Posts: 6620
- Joined: Sat Feb 11, 2006 11:00 pm
- Location: London
That is beautifulharry_p wrote:pony wrote:I got to say the original BMW 15 inch BBS alloys for me looks the best.
Those E36 M3 Evo alloys dont suit a E30 IMO.
Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre?![]()
Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.
Turbines have the advantage of brake cooling
Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION
Example:
http://media.photobucket.com/image/Pors ... rsche1.jpg
And they're side specific so lh fans and covers are angled the opposite way to the rh.
Throwing stars don't give as much of a cooling effect, but they are lighter, and again side specific so you get the same cooling effect on both sides. Which is one way to spot replicas as the spokes on all 4 wheels will face the same way.
The turbines were only used on the early 3.6 m5s, and we're soon changed for the throwing star design as a lot of people didn't really like the hubcap looks. Personally, that's why I love them!
I love the way the engineers paid so much attention to detail
Why is this technology or an improved version NOT incorporated in the latest BMW M cars? I am guessing the alloys are dictated by the "styling" department
Also slightly off topic (so apologies to OP).......with respect to brakes and brake bias.....this got me curious
does this mean the more holes in cross-drilled brake discs the worse the braking performance in the dry (though it helps in the wet by disappating water on the discs as water vapour)?
how is the overall brake bias/brake balance in general set up in road cars.....do they just take some kind of average......i noticed in F1 the drivers adjust the brake balance ALOT?
PS
@JHonno I got confused the "throwing stars" alloys u mentioned are found on the 8 Series......i thought they were the same/similar ones found on E36 M3 Evolution models.
I am little surprised the "throwing stars" which is basically shaped like a big fan seems to generate less cooling than the turbines given the black fan blade in the turbine "looks" smaller than the throwing star alloy
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
Brake bias on road cars is set up to be on the safe side, I.e set to lock the front wheels first whatever the expected load or road conditions. It helps that bmws are well balanced from the factory and loads evenly distributed.
Most hatchbacks or fwd cars have a rear end that's pretty light, but gains more as a proportion when fully loaded, so tend to have a proportioning valve attached to the rear suspension somewhere so when the back is light the rear brakes do very little, but when the car's heavier it opens allowing more fluid through and increasing effort.
As for drilled disks, technically you lose surface area and hence braking effort, but the holes improve cooling so you can use the brakes harder for longer without overheating.
Most hatchbacks or fwd cars have a rear end that's pretty light, but gains more as a proportion when fully loaded, so tend to have a proportioning valve attached to the rear suspension somewhere so when the back is light the rear brakes do very little, but when the car's heavier it opens allowing more fluid through and increasing effort.
As for drilled disks, technically you lose surface area and hence braking effort, but the holes improve cooling so you can use the brakes harder for longer without overheating.
cheers,
harry
harry
-
pony
- I have been misbehaving and am sorry !
- Posts: 6620
- Joined: Sat Feb 11, 2006 11:00 pm
- Location: London
Ah Nice one thanks Harry_Pharry_p wrote:Brake bias on road cars is set up to be on the safe side, I.e set to lock the front wheels first whatever the expected load or road conditions. It helps that bmws are well balanced from the factory and loads evenly distributed.
Most hatchbacks or fwd cars have a rear end that's pretty light, but gains more as a proportion when fully loaded, so tend to have a proportioning valve attached to the rear suspension somewhere so when the back is light the rear brakes do very little, but when the car's heavier it opens allowing more fluid through and increasing effort.
As for drilled disks, technically you lose surface area and hence braking effort, but the holes improve cooling so you can use the brakes harder for longer without overheating.
This fits nicely from what I have read from several different sources over the years that road cars in general are setup to a little understeer in their chassis to be on the conservative side.
I just found out today on the FIA F1 website F1 cars.....are the opposite....so in general the chassis is set up for a little oversteer to help point the car in cornering so with the turn in phase of "cornering".
-
Blitz
- Married to the E30 Zone

- Posts: 11151
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
M System I wheels are so cool. I need to get a set to keep.
-
mwggriffiths
- E30 Zone Newbie

- Posts: 156
- Joined: Mon Nov 14, 2011 11:00 pm
- Location: Solihull
Some more Turbine love:













Its not just "safe" its a legal requirement for all new production cars (Part of ECE 13H) to lock the front wheels first, in ALL loading conditionsharry_p wrote:Brake bias on road cars is set up to be on the safe side, I.e set to lock the front wheels first whatever the expected load or road conditions.
1990 318iS, 1998 E36 328i Touring, 2001 740i Sport, 1971 Range Rover
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
16" Hartge for me!!!



Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
G-Bear
- E30 Zone Squatter

- Posts: 1631
- Joined: Wed Mar 12, 2008 11:00 pm
- Location: Hertfordshire
Dezzy... I think your car (above) has become my favourite e30's I've seen.... It's bad to the bone...
-
adamski80
- E30 Zone Regular

- Posts: 722
- Joined: Tue Feb 24, 2009 11:00 pm
- Location: kings lynn / essex
Same as above without doubtDezzy wrote:16" Hartge for me!!!
-
aimlessrock
- E30 Zone Squatter

- Posts: 1821
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Manchester
nice, but those turbines have me captivated...
...i so want a set,
E30 320i Convertible (1989)
190 Mercedes (1988)
"there is nothing more expensive than a cheap E30"
190 Mercedes (1988)
"there is nothing more expensive than a cheap E30"
-
adamski80
- E30 Zone Regular

- Posts: 722
- Joined: Tue Feb 24, 2009 11:00 pm
- Location: kings lynn / essex
cos we all drive fast enough to need brakes sooo cold hey?
I think they look nasty but hey not on that wagon..
Throwing stars ace turbines pants as fook!!!
Sorry
I think they look nasty but hey not on that wagon..
Throwing stars ace turbines pants as fook!!!
Sorry
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Tar!G-Bear wrote:Dezzy... I think your car (above) has become my favourite e30's I've seen.... It's bad to the bone...

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
hazd31
- E30 Zone Squatter

- Posts: 1689
- Joined: Sat Feb 07, 2009 11:00 pm
- Location: west sussex, nr brighton
I need to refit that spring on the back then! explains why my mk1 golf locks the rears under braking!!harry_p wrote:Brake bias on road cars is set up to be on the safe side, I.e set to lock the front wheels first whatever the expected load or road conditions. It helps that bmws are well balanced from the factory and loads evenly distributed.
Most hatchbacks or fwd cars have a rear end that's pretty light, but gains more as a proportion when fully loaded, so tend to have a proportioning valve attached to the rear suspension somewhere so when the back is light the rear brakes do very little, but when the car's heavier it opens allowing more fluid through and increasing effort.
As for drilled disks, technically you lose surface area and hence braking effort, but the holes improve cooling so you can use the brakes harder for longer without overheating.
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
Yep!
It works during weight transfer whilst braking too. Brake hard on a dry day and the weight transfers forwards, the back gets very light. If you have a manually adjustable bias, pus usually put it quite far forwards in the dry, in the wet you can put it further back as you don't have the grip to create as much forward weight transfer, so more weight is kept on the rear wheels so try can do a higher proportion of the braking.
It works during weight transfer whilst braking too. Brake hard on a dry day and the weight transfers forwards, the back gets very light. If you have a manually adjustable bias, pus usually put it quite far forwards in the dry, in the wet you can put it further back as you don't have the grip to create as much forward weight transfer, so more weight is kept on the rear wheels so try can do a higher proportion of the braking.
cheers,
harry
harry
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
You getting mixed up between brake bias and under/oversteer bias (can't remember the correct term) as they are 2 very different things.pony wrote:
Ah Nice one thanks Harry_P![]()
This fits nicely from what I have read from several different sources over the years that road cars in general are setup to a little understeer in their chassis to be on the conservative side.
I just found out today on the FIA F1 website F1 cars.....are the opposite....so in general the chassis is set up for a little oversteer to help point the car in cornering so with the turn in phase of "cornering".
And adamski, yes some of us do.
-
pony
- I have been misbehaving and am sorry !
- Posts: 6620
- Joined: Sat Feb 11, 2006 11:00 pm
- Location: London
I just meant that road cars are set up in general with a slight understeer handling trait.ross_jsy wrote:You getting mixed up between brake bias and under/oversteer bias (can't remember the correct term) as they are 2 very different things.pony wrote:
Ah Nice one thanks Harry_P![]()
This fits nicely from what I have read from several different sources over the years that road cars in general are setup to a little understeer in their chassis to be on the conservative side.
I just found out today on the FIA F1 website F1 cars.....are the opposite....so in general the chassis is set up for a little oversteer to help point the car in cornering so with the turn in phase of "cornering".
And adamski, yes some of us do.
F1 cars with a slightly more oversteering handling trait.
I am aware that brake bias is different. I just meant that road cars are on the conservative/prudent side with regards to overall handling characteristic and the way the brake bias is.
See
"Understeer is inherently stable - once the car reduces speed sufficiently grip will be restored, which is why almost all road cars are set up to understeer at the limit of adhesion. But it also slows a car, which is why Formula One chassis engineers try to avoid it. Oversteer is, by contrast, highly unstable. Unless a driver acts to correct it quickly with skilful use of steering and throttle it can result in a spin. But an 'oversteery' chassis helps the driver to turn into a corner and, at the limit of adhesion, enables a skilled driver to carry far more speed through a corner than understeer. Which is why, to a greater or lesser extent, all F1 cars are set up with an oversteer characteristic."
Source
http://www.formula1.com/inside_f1/under ... /5294.html
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
In general performance cars will be set up to oversteer.
I find oversteer far more controllable but that's when I'm expecting it. If you are ready you can catch it. Understeer always scares the hell out of me but to a normal driver it wont need a reaction to sort out so it is safer
I find oversteer far more controllable but that's when I'm expecting it. If you are ready you can catch it. Understeer always scares the hell out of me but to a normal driver it wont need a reaction to sort out so it is safer
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Handling balance..?ross_jsy wrote:You getting mixed up between brake bias and under/oversteer bias (can't remember the correct term) as they are 2 very different things.pony wrote:
Ah Nice one thanks Harry_P![]()
This fits nicely from what I have read from several different sources over the years that road cars in general are setup to a little understeer in their chassis to be on the conservative side.
I just found out today on the FIA F1 website F1 cars.....are the opposite....so in general the chassis is set up for a little oversteer to help point the car in cornering so with the turn in phase of "cornering".
And adamski, yes some of us do.
-
Captain_Birdseye
- E30 Zone Regular

- Posts: 874
- Joined: Sun Mar 25, 2012 11:00 pm
- Location: Bristol (and Cheltenham)
I want those turbines too 
-
rimz
- E30 Zone Newbie

- Posts: 135
- Joined: Wed Jun 30, 2010 11:00 pm
- Location: birmingham
RH Toplines diamond polished



