Hottuning 6 branch
Moderator: martauto
-
Rodderz
- E30 Zone Addict

- Posts: 3105
- Joined: Thu Nov 24, 2005 11:00 pm
- Location: Southampton
Shouldnt it have 2 flanges to connect to the middle box???
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
No - second pipe uses a large 'olive' (like a compression plumbing fitting).
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
You remove the old one along with a new olive, to fit it to your centre section.Rodderz wrote:Shouldnt it have 2 flanges to connect to the middle box???

-
gra325i
- E30 Zone Meets/Events Team

- Posts: 1914
- Joined: Mon Mar 05, 2007 11:00 pm
- Location: Montrose-North scotland
-
Rodderz
- E30 Zone Addict

- Posts: 3105
- Joined: Thu Nov 24, 2005 11:00 pm
- Location: Southampton
Fantastic looking bit of kit....dose anybody want to buy my mild steel one for £200?????? lol
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
it certainly looks the part but i must have missed the proof of this claim from the hot tuning site
that would see gains of between 17-34bhp?Dyno tested and proven increase horse power over 10-20 procent
-
macas
- E30 Zone Squatter

- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
I know this is an old thread,but what were the increases (if any)that the hottuning manifolds made?
Need a six branch soon so was wondering?
Need a six branch soon so was wondering?
-
powelly
- E30 Zone Squatter

- Posts: 1649
- Joined: Wed Dec 06, 2006 11:00 pm
- Location: On the scrap heap
The Dyno print out is the very first post on the thread.
Le Mans Classic 2006-
macas
- E30 Zone Squatter

- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
Actually hadnt explained myself properly then.
I had seen that print out but was just asking the other people that had purchased one,because no one seemed to put up there results or views.
I had seen that print out but was just asking the other people that had purchased one,because no one seemed to put up there results or views.
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
I never posted the before and after results of a btb2 on a stock engine on this thread! Well I will tonight and it has proven that the btb2 does give 15 odd bhp gain and that many people who posted on this thread were proven wrong!
That includes many well regarded zoners some of which are mates!
The hotuning was proven at the beginning of this thread to give bugger all power gains.
If you want a power increase buy a btw, if you want a cheap bit of bling, buy the hotuning poorly made copy of a btb.
That includes many well regarded zoners some of which are mates!
The hotuning was proven at the beginning of this thread to give bugger all power gains.
If you want a power increase buy a btw, if you want a cheap bit of bling, buy the hotuning poorly made copy of a btb.
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
bss325i wrote:If you want a power increase buy a btw, if you want a cheap bit of bling, buy the hotuning poorly made copy of a btb.
Not needed to react this way... We know BTB made a very good manifold, and yes we all know ours does like very similair. That is how it goes in business.. By the way Not everybody can or will pay 800£ or more for a manifold or they just want to swap their original one for a reasonable price?!?! . For that customers our manifold is a very good alternative.....
Probably it's much easier to write negative instead of positive.. Let BTB serve their customers and let us serve our customers. We never told that ours is the same or better as the BTB one..
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
macas
- E30 Zone Squatter

- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
Id never heard of btb to be honest,i was just lookin for a ss 6 branch and the hotunning name came up in the search.
But it does seem alot people have installed a hottunning manifold but theres no responses of gains etc(apart from the dyno results at the start if the thread).
If you could put up some dyno results bss that that would be great,what are the prices like for a btb?
But it does seem alot people have installed a hottunning manifold but theres no responses of gains etc(apart from the dyno results at the start if the thread).
If you could put up some dyno results bss that that would be great,what are the prices like for a btb?
-
hottuning_eu
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Oct 25, 2007 11:00 pm
- Location: Belgium
At the first page are dyne results..
That has been dyne tested by Simon for us..
That has been dyne tested by Simon for us..
Contact us at sales@hottuning.eu or check our shop at:
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
**** www.hottuning.co.uk ****
!! OUR CUSTOMER SERVICE IS #1!!
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
There's an unbiased list of manifolds in the Wiki for anyone browsing this thread, which documents the gains the hottuning manifold makes. The dyno charts have also been uploaded in case the original pics disappear.
http://www.e30zone.net/e30zonewiki/inde ... #Manifolds
http://www.e30zone.net/e30zonewiki/inde ... #Manifolds
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
As an update to my installation which is detailed earlier in this thread and about 4 years ago....
First fitted to my 2.7 engine,in a four door laches saloon,this has now been sent to China and the engine/'box exhaust and most of the suspension was re-cycled into my Neon Green cabbie.The manifold from Hottuning has given me no problems whatsoever,no failure of welds,no blows from it's join to the rest of a stock three piece system.
In all,I consider it to be £200 well spent.
First fitted to my 2.7 engine,in a four door laches saloon,this has now been sent to China and the engine/'box exhaust and most of the suspension was re-cycled into my Neon Green cabbie.The manifold from Hottuning has given me no problems whatsoever,no failure of welds,no blows from it's join to the rest of a stock three piece system.
In all,I consider it to be £200 well spent.
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
+1. For £200, it's something of a bargain, to at least dramatically improve the underbonnet look.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
macas
- E30 Zone Squatter

- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
Daimlerman,how much gain did you get?Or did you just buy it for the looks?
Would i find benefit on just a standerd(i.e not chipped etc) m20 b25?
Would i find benefit on just a standerd(i.e not chipped etc) m20 b25?
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Very unlikely.
-
macas
- E30 Zone Squatter

- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
Just had a look at the btb website but they dont give prices so will have to phone them.
The price really isnt the problem just wanted to know which would give me best value for money(Powergains really).
The price really isnt the problem just wanted to know which would give me best value for money(Powergains really).
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
This is on a completely standard low compression 25 6K M20B25.
Just a BTB2 manifold, sebring centre box and scorpion rear box.
No chip's, no cams no nothing.
The power increase is brilliant but check out the peak torque gains and a significant increase all the way to the rev limiter!
This torque gain is noticeable with surge like pick up circa 3k+ rpm which tallys up with the graph.
Almost turbo like in delivery.
Before and after, BTB FTW!

Just need a long stroke rebuild to up the bottom end torque now!

Just a BTB2 manifold, sebring centre box and scorpion rear box.
No chip's, no cams no nothing.
The power increase is brilliant but check out the peak torque gains and a significant increase all the way to the rev limiter!
This torque gain is noticeable with surge like pick up circa 3k+ rpm which tallys up with the graph.
Almost turbo like in delivery.
Before and after, BTB FTW!

Just need a long stroke rebuild to up the bottom end torque now!
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
The cheapest you will get a BTB manifold for is £650 and that is with a zone group buy.macas wrote:Just had a look at the btb website but they dont give prices so will have to phone them.
Here is the last one.
http://www.e30zone.net/modules.php?name ... 43&start=0
There have been a few people asking about BTB manifolds recently so it might be worth starting another thread to gauge interest?
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
£/bhp the BTB wins hands down.macas wrote:Just had a look at the btb website but they dont give prices so will have to phone them.
The price really isnt the problem just wanted to know which would give me best value for money(Powergains really).
-
HJG-E30
- E30 Zone Regular

- Posts: 557
- Joined: Sat Dec 05, 2009 11:00 pm
- Location: West Sussex
How close is the hot-tuning manifold to the BTB in terms of geometry?? If it's identical then how does the BTB produce so much more power?
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Superior construction.
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
This is a forum about E30's.hottuning_eu wrote:bss325i wrote:If you want a power increase buy a btw, if you want a cheap bit of bling, buy the hotuning poorly made copy of a btb.
Not needed to react this way... We know BTB made a very good manifold, and yes we all know ours does like very similair. That is how it goes in business.. By the way Not everybody can or will pay 800£ or more for a manifold or they just want to swap their original one for a reasonable price?!?! . For that customers our manifold is a very good alternative.....
Probably it's much easier to write negative instead of positive.. Let BTB serve their customers and let us serve our customers. We never told that ours is the same or better as the BTB one..
This is a discussion about a product for an E30 and its not on your for sale thread so the product is open to discussion good or bad!
If you don't like it, tough!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
This is from your site though right?hottuning_eu wrote:bss325i wrote:If you want a power increase buy a btw, if you want a cheap bit of bling, buy the hotuning poorly made copy of a btb.
Not needed to react this way... We know BTB made a very good manifold, and yes we all know ours does like very similair. That is how it goes in business.. By the way Not everybody can or will pay 800£ or more for a manifold or they just want to swap their original one for a reasonable price?!?! . For that customers our manifold is a very good alternative.....
Probably it's much easier to write negative instead of positive.. Let BTB serve their customers and let us serve our customers. We never told that ours is the same or better as the BTB one..
fuzzy wrote:it certainly looks the part but i must have missed the proof of this claim from the hot tuning sitethat would see gains of between 17-34bhp?Dyno tested and proven increase horse power over 10-20 procent
-
macas
- E30 Zone Squatter

- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
Thanks for putting them graphs up bss.
But what torque gains did you get?
It's probably obvious on the graph but I'm a thick cooont!
But what torque gains did you get?
It's probably obvious on the graph but I'm a thick cooont!
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
20lbft peak.
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
Hot tuning fannymoulds are simply awesome,
I happen to have a shiny unused one that will look great on any 6 pot turd for £120 posted
I happen to have a shiny unused one that will look great on any 6 pot turd for £120 posted




