wheel fitment

Need technical Q/A then you're in the right place

Moderator: martauto

DazzyA
E30 Zone Regular
E30 Zone Regular
Posts: 645
Joined: Wed Nov 02, 2005 11:00 pm
Location: Colchester, Essex

Post Sun Nov 27, 2005 10:29 pm

Does anybody know whether this wheel configuration will fit the E30?
Pass me the spanner
Top
TOURINGDADDY
E30 Zone Addict
E30 Zone Addict
Posts: 2268
Joined: Sat May 14, 2005 11:00 pm
Location: PORTSMOUTH

Post Sun Nov 27, 2005 10:30 pm

what were
Image
Top
DazzyA
E30 Zone Regular
E30 Zone Regular
Posts: 645
Joined: Wed Nov 02, 2005 11:00 pm
Location: Colchester, Essex

Post Sun Nov 27, 2005 10:36 pm

not much help if you forget to add pictures, doh!!
Image :oops:
Pass me the spanner
Top
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Sun Nov 27, 2005 10:39 pm

71mm between bolts = 100.4mm PCD

Sounds OK to me, you need to know the wheels offset to know whether they will fit or not...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
Top
TOURINGDADDY
E30 Zone Addict
E30 Zone Addict
Posts: 2268
Joined: Sat May 14, 2005 11:00 pm
Location: PORTSMOUTH

Post Sun Nov 27, 2005 10:39 pm

any idea what there from ?
Image
Top
DazzyA
E30 Zone Regular
E30 Zone Regular
Posts: 645
Joined: Wed Nov 02, 2005 11:00 pm
Location: Colchester, Essex

Post Sun Nov 27, 2005 10:45 pm

Wolfrace shadow's
Image
205/35/18, are they too big?? 8O
Pass me the spanner
Top
TOURINGDADDY
E30 Zone Addict
E30 Zone Addict
Posts: 2268
Joined: Sat May 14, 2005 11:00 pm
Location: PORTSMOUTH

Post Sun Nov 27, 2005 10:48 pm

stamped on the inside of the wheel it will have et------ and 18" will b fine a mate used to have 19" on his!
Image
Top
DazzyA
E30 Zone Regular
E30 Zone Regular
Posts: 645
Joined: Wed Nov 02, 2005 11:00 pm
Location: Colchester, Essex

Post Sun Nov 27, 2005 10:51 pm

top man, I'll get the chap to have a look, what should it be?
Pass me the spanner
Top
TOURINGDADDY
E30 Zone Addict
E30 Zone Addict
Posts: 2268
Joined: Sat May 14, 2005 11:00 pm
Location: PORTSMOUTH

Post Sun Nov 27, 2005 10:56 pm

http://www.alloyguide.co.uk/BMW.htm
Image
Top
DazzyA
E30 Zone Regular
E30 Zone Regular
Posts: 645
Joined: Wed Nov 02, 2005 11:00 pm
Location: Colchester, Essex

Post Sun Nov 27, 2005 11:01 pm

thaks for the link, may be a stupid question, but is there any way of chemging the offset? spacers etc..
Pass me the spanner
Top
TOURINGDADDY
E30 Zone Addict
E30 Zone Addict
Posts: 2268
Joined: Sat May 14, 2005 11:00 pm
Location: PORTSMOUTH

Post Sun Nov 27, 2005 11:06 pm

there sure is u could have them milled down or buy bolt in spacers! dont do the chep spacers as u'll kill more wheel bearings than u can shake a wicked stick at!
Image
Top
DazzyA
E30 Zone Regular
E30 Zone Regular
Posts: 645
Joined: Wed Nov 02, 2005 11:00 pm
Location: Colchester, Essex

Post Sun Nov 27, 2005 11:08 pm

Ok, thanks for all the help dude, I appreciate it mate.
Pass me the spanner
Top

Return to “E30 Technical Help”