318is more cc?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
samuraibaz
E30 Zone Newbie
E30 Zone Newbie
Posts: 241
Joined: Tue Dec 06, 2011 11:00 pm
Location: Kent

Post Thu Apr 12, 2012 12:09 am

Hi all
Does anyone know how i can up the M42 from 1800cc without spending buckets of cash as i like the high revving 4 cylinder engine?
Thanks
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Thu Apr 12, 2012 12:47 am

mehh dude i might aswell be the first to say so here goes ,hell of alot cheaper and better to go m50/52
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Thu Apr 12, 2012 6:25 am

samuraibaz wrote:without spending buckets of cash
That's simply not going to happen.
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Fri Apr 13, 2012 5:52 pm

Best bet would be M44 parts from an e36. But you're not looking at a lot of difference to be honest, unless you start making drastic changes you won't get much of a power difference. Highest bhp I've seen a naturally aspirated M42 put out without major rework is about 160.
Last edited by cee on Fri Apr 13, 2012 7:14 pm, edited 1 time in total.
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
e30kev
E30 Zone Regular
E30 Zone Regular
Posts: 402
Joined: Sun Apr 15, 2007 11:00 pm
Location: Kelty, Scotland

Post Fri Apr 13, 2012 6:26 pm

just turbo it or drop a real engine in with the correct amount of cylinders :D
Image
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Fri Apr 13, 2012 6:49 pm

I was always adamant that 4cyls were better too until I did the research, in reality, until BMW make a large capacity l4, the only option for more power is an m20 or m50.
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
User avatar
kevo
E30 Zone Camper
E30 Zone Camper
Posts: 1234
Joined: Thu Sep 21, 2006 11:00 pm
Location: S.Wales

Post Fri Apr 13, 2012 7:14 pm

I'm considering selling my m42 engine from my rally car if you are interested? it has a set of cat cams, it's been fully rebuilt with proof etc around 2000 miles ago, has three angle valve seats cut in it, has a big bore throttle body and a fully remapped ecu (not just a chip). it also has a lightweight flywheel on it too.
I only offered as all the parts are there ready built up which is about as far as you'd really want to go without boring out the cylinders etc which isn't really too viable financially bhp/£.

having said that I'll be looking to stick an m52 in it as i've been so impressed with the one in my road car, but it is a bit heavier over the nose than the m42.
Kev
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Fri Apr 13, 2012 7:15 pm

kevo wrote:I'm considering selling my m42 engine from my rally car if you are interested? it has a set of cat cams, it's been fully rebuilt with proof etc around 2000 miles ago, has three angle valve seats cut in it, has a big bore throttle body and a fully remapped ecu (not just a chip). it also has a lightweight flywheel on it too.
I only offered as all the parts are there ready built up which is about as far as you'd really want to go without boring out the cylinders etc which isn't really too viable financially bhp/£.

having said that I'll be looking to stick an m52 in it as i've been so impressed with the one in my road car, but it is a bit heavier over the nose than the m42.
Kev
What kind of specs are you getting from it?
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
User avatar
kevo
E30 Zone Camper
E30 Zone Camper
Posts: 1234
Joined: Thu Sep 21, 2006 11:00 pm
Location: S.Wales

Post Fri Apr 13, 2012 7:55 pm

I haven't had it on the rollers, but i think 150-160 is a reasonable assumption although this is based on a guess so isn't a fact. the cams are supposed to bring 10-15bhp or so the ecu remap should bring about the same, the engine is freshly rebuilt and the head skimmed so the compression is marginally up on standard and the big bore throttle body is supposed to add a bit too, all that on top of 136bhp from factory, so while i don't have a figure it goes pretty damn well lol. especially when it's mated to a shortened gearbox and a 4.45 diff and revs to 7k and tops out at 105mph in fifth. play.
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Fri Apr 13, 2012 7:57 pm

Sounds good. If I didn't need an economical engine I'd be tempted :(
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
User avatar
kevo
E30 Zone Camper
E30 Zone Camper
Posts: 1234
Joined: Thu Sep 21, 2006 11:00 pm
Location: S.Wales

Post Fri Apr 13, 2012 8:13 pm

cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Fri Apr 13, 2012 8:16 pm

Wow, not too bad!
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
User avatar
kevo
E30 Zone Camper
E30 Zone Camper
Posts: 1234
Joined: Thu Sep 21, 2006 11:00 pm
Location: S.Wales

Post Fri Apr 13, 2012 8:21 pm

my car is lightened though, but then it's short geared too so i suppose it compensates for it. i think in all honestly it would be okay as an everyday runner, although the cams idling wouldn't impress the missus lol
User avatar
mwggriffiths
E30 Zone Newbie
E30 Zone Newbie
Posts: 156
Joined: Mon Nov 14, 2011 11:00 pm
Location: Solihull

Post Sun Apr 15, 2012 9:37 pm

e30kev wrote:just turbo it or drop a real engine in with the correct amount of cylinders :D
A V8? winkeye
Image
1990 318iS, 1998 E36 328i Touring, 2001 740i Sport, 1971 Range Rover
318isPMK
E30 Zone Camper
E30 Zone Camper
Posts: 1499
Joined: Tue Jan 10, 2012 11:00 pm

Post Sun Apr 15, 2012 10:21 pm

I think you should appreciate it for what it is or sell it and buy and 325 it was never meant to be what you want it to be... Listen to me getting all sensible!
Image