jimf wrote:Is there a logical order to replace things, for us guys that cant afford to do the whole lot in one go?
I'd argue that there is, but all depending on how handy you are with the spanners, and how much free cash you have every month. The two big culprits will be shagged bushes, as everyone else has said, and those awful wheels you've got as barry pointed out. Almost any 15" or 16" rim will give you a tighter feeling than those dustbin lids you've got on now.
So start with the wheels; flog 'em on to some idiot 17 year old, and get some proper alloys on. Once you've done that, look at refreshing your shocks and springs; you don't have to install a full H&R cup kit, but putting some fresh Bilsteins on each corner will help. It'll also help to do the top mounts at the same time for just a few quid more.
With that done, you should have learned how the suspension works at both ends. So move to the back end and invest the money in new rear beam bushes and trailing arm bushes, as well as ARB bushes and drop links. The parts themselves won't cost much, although you'll need a few tools to get everything off and swapped over. While the beam's off, do the brake lines, since it only costs pennies and takes no time at all with the beam removed. If you're experienced, a rear bush overhaul takes a weekend.
Then move to the front, and systematically do your lollipop bushes and ARB bushes, and replace any worn ball joints.
That's four separate weekends of work that can be staggered over four pay days if you wanted to. And all the parts and writeups are in the Wiki.