Cheap 6 branch query...

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Wed Apr 11, 2012 5:14 pm

I bought a budget cheapo 6 branch some time back from Ebay, never got round to returning it but stumpled upon it again today.

Just wondering if there is anyone on here local to me that would be able to make it fit...


Basically It wouldnt fit on my car due to the clearance of one bolt

Its the centre branch below which you should see in the picture

Image

Image

Image


Is there anyone on here that could sort it by moving it to the right position and rewelding etc... And how much would it cost? Its only a cheapo one so I wouldnt want to spend loads trying to make it work...


Any advice or recommendations would be great :cool:
User avatar
Brian28
E30 Zone Squatter
E30 Zone Squatter
Posts: 1596
Joined: Sat Jun 11, 2005 11:00 pm
Location: Bournemouth

Post Wed Apr 11, 2012 6:25 pm

I fitted a similar one by cutting the stud a bit shorter to show mebbe 4 threads or so past the manifold, then slicing a nut in half so it was only half the depth and had clearance to fit. A complete sh!t to do, but a second one I fitted was even worse. The header was welded right on the edge of the stud hole, so had to grind away a cm or so of the header, fill the hole up with weld deeper than the original header tube, grind the weld down, and then smooth the inside of the weld with a die grinder. Bought that one from a chap on here a couple of months ago, he bought it but never fitted it. If I'd bought it from a shop it would have been going back!

No chance of bending the tube etc to fit, if you look at the centre header it's discoloured where they heat it red hot then smack it with a ball hammer or something to give clearance, but it's a bit hit and miss.
For sale - E30 320i racer project - sold.
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Wed Apr 11, 2012 7:09 pm

Pooo...

I did try cutting the stud down but from memory it didnt work, i'll have to have another attempt with a spare cylinder head I have as I dont want to go the hassle of taking all mine off for me to fail again.

Thats what you get for buying cheap I suppose :twisted: :mad:
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Wed Apr 11, 2012 7:10 pm

Who did you buy it from Brian as guarenteed they attempted to fit it then fobbed it off they never got round to fitting it...
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Wed Apr 11, 2012 7:19 pm

Is that the only stud you have clearance problems with?

If so leave all the other nuts off and start with that stud. Pull the manifold away from the head so you can get a nut on then wind it on.

Then do the rest.

Or throw it in the bin and buy a proper one.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Wed Apr 11, 2012 7:29 pm

bss325i wrote: Or throw it in the bin and buy a proper one.
I might do at some point, but I need to make my car less 'El Turdio' first :cry:

As for the rest, yes its 1 stud, but from memory, the nut doesnt even sit flush without the stud going through as Im sure I tried that method, but i'll give it another shot on the spare head.

Im in no rush to fit it as my car is still sitting doing thing at the moment, im waiting for a nice clear day to crack onw ti the rust finding exercise 8O :?
User avatar
Brian28
E30 Zone Squatter
E30 Zone Squatter
Posts: 1596
Joined: Sat Jun 11, 2005 11:00 pm
Location: Bournemouth

Post Wed Apr 11, 2012 9:19 pm

Jim320i wrote:Who did you buy it from Brian as guarenteed they attempted to fit it then fobbed it off they never got round to fitting it...
http://www.e30zone.net/modules.php?name ... c&t=216180

Seemed a decent enough chap to deal with to be honest. I didn't bother to contact him when I had the fitting problems, didn't seem a lot of point really. Was just after something cheap a bit lighter than standard, and if it helped with power so much the better.

Jim the close up looks like to need to skim the grinder along to clear a bit of room for a nut around the stud. Take as much of the weld off as you can without breaking through.
For sale - E30 320i racer project - sold.