Exhaust hanger

Moderator: martauto

User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Wed Apr 11, 2012 10:52 am

I seem to be missing the hanger that goes between the exhaust middle section and the gearbox.

There's different ones depending on engine/box/exhaust you have, I'm running with a M42 box and a e30 M3 exhaust.

325
Image
http://static.bmwfans.info/images/epc/MjYzNV9w.png

318is - no's 4-14
Image
http://www.realoem.com/bmw/diagrams/j/h/1.png

M3 - no's 7 - 13
Image
http://www.realoem.com/bmw/diagrams/j/e/10.png

The M3 one probably works the best, it fixes to the flanges from the manifold and the middle section but I don't know if it fits the M42 box.

Also anyone know if the M3 Scorpion rear box used different hangers than normal facelift E30's? From offering it up it must hang a good bit below the bootfloor for the pipes to exit in the cut out.
Sanchez
Married to the E30 Zone
Married to the E30 Zone
Posts: 7578
Joined: Sun Apr 17, 2005 11:00 pm
Location: Sunny Scotland

Post Wed Apr 11, 2012 11:01 am

Most e30s will probably not have this hanger fitted these days.
Image
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Wed Apr 11, 2012 11:17 am

Pretty sure I was missing mine. Should I go with the M3 one and will it fit the M42 box?