I've got some new wheel bearings to fit to my car, the ones I'm taking off have no ABS ring, but the ones I'm fitting do. Will these new ones fit ok with the metal inner 'cap' part that is attatched to the strut? Looks like they will go into a groove between the bearing and ABS ring but looks tight. I'll get a pic a bit later on to explain a bit better.
I just dont want to fit the new bearing, find it won't fit properly, and then have to take the bearing back out again which will probably ruin it
Front wheel bearing query
Moderator: martauto
-
Bristol_Jer
- E30 Zone Addict
- Posts: 2523
- Joined: Thu Sep 24, 2009 11:00 pm
- Location: Bristol, UK
Number 2. Been looking through and it seems all e30's have the same cup fitted, going to get a couple more as they look a bit out of shape just to be on the safe side
-
clipper
- E30 Zone Squatter
- Posts: 1980
- Joined: Mon Aug 22, 2005 11:00 pm
- Location: Madrid
I fitted ABS ringed hubs to my non ABS car a few weeks back with no issue whatsoever.
These are sensations as hard to forget as they are to ignore.....
-
Bristol_Jer
- E30 Zone Addict
- Posts: 2523
- Joined: Thu Sep 24, 2009 11:00 pm
- Location: Bristol, UK
Thats great, thanks! 
-
Rav335uk
- E30 Zone Meets/Events Team
- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
You can take the ring off if need be, but wouldn't worry about it.
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Bristol_Jer
- E30 Zone Addict
- Posts: 2523
- Joined: Thu Sep 24, 2009 11:00 pm
- Location: Bristol, UK
I've ordered up new hub nuts and caps, and a pair of those cup things from Cotswold, might as well change all of it while it's apart!