carbon fibre
Moderator: martauto
-
dodgydave13
- E30 Zone Newbie

- Posts: 31
- Joined: Wed Mar 09, 2011 11:00 pm
- Location: bristol
A friend of mine who's buisness is using carbon fibre has asked me if there was anything else he could branch out into based in chippenham he has the facilities to make and bake the moulds and a paint shop
so my question is to you what would you have made in carbon fibre that you think would sell i have suggested
e30 wings
e30 bonnet
e30 sunroof pannel
e30 boot lid
motorbike pannels
it doesnt have to be car parts but would need to be made in bulk to be cost effective
any help or ideas would be great
so my question is to you what would you have made in carbon fibre that you think would sell i have suggested
e30 wings
e30 bonnet
e30 sunroof pannel
e30 boot lid
motorbike pannels
it doesnt have to be car parts but would need to be made in bulk to be cost effective
any help or ideas would be great
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
Are there not folk on here looking for lightweight dashboards just now?

'88 e30 328i M52 track bint.
-
Ninja_Penguin
- E30 Zone Newbie

- Posts: 232
- Joined: Sat Aug 27, 2011 11:00 pm
- Location: Cornwall
106/saxo bits...the french people seem to like CF bits

-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
RHD dash would be cool. Imagine pricey though
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Would be good to see a direct replacement carbon sunroof,
The other carbon groupbuy thread has died a death...
The other carbon groupbuy thread has died a death...
-
Motorhole
- E30 Zone Addict

- Posts: 2395
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: Cheshire
I'll add +1 to RHD dashboard.
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
Wide e30 wings!
-
craigieeb
- E30 Zone Addict

- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
mmmmmm carbon
Do you have a link to the company, so we can see the work they can do...?
Do you have a link to the company, so we can see the work they can do...?
M50 Turbo!!!
I shall say no more 
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
E39/E60 interior parts might be a good way to go...
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
would love a e30 boot lid to go with my bonnet
-
dodgydave13
- E30 Zone Newbie

- Posts: 31
- Joined: Wed Mar 09, 2011 11:00 pm
- Location: bristol
hi if someone is willing to donate a good dash a mould can be made and then prices can be arranged i cant imagine it will be cheap but if we can get a bulk order prior to production then it will pay off
-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
I'll have a touring shell, doors and rear hatch!!! (If i win the lottery of course!!!).
In real life... front wings!!
And surely a touring hatch would go down well?? Weight saving and rust removal!!!
In real life... front wings!!
And surely a touring hatch would go down well?? Weight saving and rust removal!!!
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
dodgydave13
- E30 Zone Newbie

- Posts: 31
- Joined: Wed Mar 09, 2011 11:00 pm
- Location: bristol
ok going to need pannels
i need a
dash
bonnet
left front wing
right front wing
bonnet
3door front doors
5door front and rear doors
coupe boot lid
estate boot lid
please all must be clean and rust free
not on the take here just need some good pannels to get moulds from
im located in bristol any help to get these parts into production would be great
my numbers 07896661415
i need a
dash
bonnet
left front wing
right front wing
bonnet
3door front doors
5door front and rear doors
coupe boot lid
estate boot lid
please all must be clean and rust free
not on the take here just need some good pannels to get moulds from
im located in bristol any help to get these parts into production would be great
my numbers 07896661415
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
Carbon sunroof panels are already available
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
If you could give an idea of the price for each item you'll get much more interest.
There is a market for CF pannels depending on price
There is a market for CF pannels depending on price

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
dodgydave13
- E30 Zone Newbie

- Posts: 31
- Joined: Wed Mar 09, 2011 11:00 pm
- Location: bristol
the company doing the carbon fibre make the invicta so they know how to make qualty
http://www.invictacars.co.uk/home.html
i will speak to the owner tonight get get some prices
http://www.invictacars.co.uk/home.html
i will speak to the owner tonight get get some prices
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
Touring hatch would be awesome, not sure how you would do the glass?
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
stew72
- E30 Zone Regular

- Posts: 653
- Joined: Fri Dec 02, 2011 11:00 pm
Not wanting to pee on anyones bonfire but the following is from experience, assuming whats on offer is glossy finished panels with an exposed weave then to get the quality required the surface materials need to be specific for that purpose and you need to invest in quality tooling, ideally tooling carbon or aluminium. To cover these costs and make the product affordable you need to be able to sell in bulk.
However if whats on offer is painted panels then why bother for a road car?
However if whats on offer is painted panels then why bother for a road car?
-
dodgydave13
- E30 Zone Newbie

- Posts: 31
- Joined: Wed Mar 09, 2011 11:00 pm
- Location: bristol
the company is already running just looking for some new ideas between prodjects
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Direct replacement sunroof pannels!
None of this dressy carbon bling, just good, strong accurate pannels, I'd pay £250 for one...
I know plugs are available already but form & function...
None of this dressy carbon bling, just good, strong accurate pannels, I'd pay £250 for one...
I know plugs are available already but form & function...
-
stew72
- E30 Zone Regular

- Posts: 653
- Joined: Fri Dec 02, 2011 11:00 pm
I'm talking about the tooling that is required to make the specific part.dodgydave13 wrote:the company is already running just looking for some new ideas between prodjects
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
I'd be interested in +50mm overfenders all round in carbon or fibreglass.
Also rear m3 style wing and ducktail spoiler
Also the heat shields under the car
Various flat floor panels
Dashboard, centre console
Front control arm
Rear trailing arm
Also rear m3 style wing and ducktail spoiler
Also the heat shields under the car
Various flat floor panels
Dashboard, centre console
Front control arm
Rear trailing arm
-
jonny323i
- Engaged to the E30 Zone

- Posts: 5428
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: Stoke on trent
as the glass is bonded in surely it would be just as easy as fitting new glass onto a steel itemMorat wrote:Touring hatch would be awesome, not sure how you would do the glass?
Touring for life
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
Front control arm and rear trailing arm in carbon?
This isn't F1 lad
This isn't F1 lad
-
craigieeb
- E30 Zone Addict

- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
redcar wrote:I'd be interested in +50mm overfenders all round in carbon or fibreglass.
Also rear m3 style wing and ducktail spoiler
Also the heat shields under the car
Various flat floor panels
Dashboard, centre console
Front control arm
Rear trailing arm
you missed out the rear blown diffuser
M50 Turbo!!!
I shall say no more 
-
stew72
- E30 Zone Regular

- Posts: 653
- Joined: Fri Dec 02, 2011 11:00 pm
ross_jsy wrote:Front control arm and rear trailing arm in carbon?
This isn't F1 lad
-
jaymos
- E30 Zone Addict

- Posts: 2271
- Joined: Tue Aug 25, 2009 11:00 pm
- Location: st helens
there are cheaper alternatives for tooling, obviously they dont last as long but you can get some really nice products out of them.stew72 wrote:Not wanting to pee on anyones bonfire but the following is from experience, assuming whats on offer is glossy finished panels with an exposed weave then to get the quality required the surface materials need to be specific for that purpose and you need to invest in quality tooling, ideally tooling carbon or aluminium. To cover these costs and make the product affordable you need to be able to sell in bulk.
However if whats on offer is painted panels then why bother for a road car?

vier Türen sind für Menschen mit Freunden.
-
Dave_M3
- E30 Zone Addict

- Posts: 3428
- Joined: Sat Jun 24, 2006 11:00 pm
- Location: Cork
Did anybody send some panels to get the ball rolling?
M42 rightness above 6500rpm, nobody can hear you scream
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
-
Dave_M3
- E30 Zone Addict

- Posts: 3428
- Joined: Sat Jun 24, 2006 11:00 pm
- Location: Cork
Plus customs then when they arrive on Irish or UK soil 
Have a friend in VAC but no help or discount could make those panels cost effective
Have a friend in VAC but no help or discount could make those panels cost effective
M42 rightness above 6500rpm, nobody can hear you scream
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Dave, I thought you were doing CF/GRP parts no?
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
Where Kos?Kos wrote:Carbon sunroof panels are already available
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
It's not a complete bolt in panel, its a glue in blank.
-
Tan91
- E30 Zone Regular

- Posts: 368
- Joined: Fri Jun 20, 2008 11:00 pm
- Location: West London
Just an idea here if you require those parts, wouldn't it make sense if you buy a cheap e30 more-door or a coupe and use parts of that, only thing is hoping that the shell is strong to begin with, I would assume you need a strong panel to begin with. Just a thought.
Would you do door handle trims? / glove box handle? / outer door handles?
Tan.
Would you do door handle trims? / glove box handle? / outer door handles?
Tan.



