Tin worm on the sport

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
janc
E30 Zone Newbie
E30 Zone Newbie
Posts: 112
Joined: Sat Sep 10, 2005 11:00 pm
Location: Falkirk

Post Sun Apr 01, 2012 8:15 pm

Time has finally come to face facts. The tin worm has got to much and I now find myself asking if I should get my 325i sport fixed.

I hope the site can help me. The scuttle panel now has a hole 3 x 3 inch. Tapped it by mistake. Also the boot panel above the light fittings have gone. Serious, it looks terminal and will require a new rear panel I think.

The question I have is, roughly how much? Any estimate would be greatly appreciated from anyone that has completed the work previously.
:cry:

Mechanically the car is sound, is it worth the time and money to fix or should I save to get a complete respray?

Thank you for any help.

Jan
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Sun Apr 01, 2012 8:20 pm

rear panel fitted and sprayed would probably easier and more cost effective than trying to repair the thing.. as for the scuttle, anything is fixable so don't despair.. but don't forget water will probably have been leaking in and may have rotted the panel underneath.. can you see in the 3x3 hole with a torch? any chance of a few pics?
Image
User avatar
janc
E30 Zone Newbie
E30 Zone Newbie
Posts: 112
Joined: Sat Sep 10, 2005 11:00 pm
Location: Falkirk

Post Sun Apr 01, 2012 8:23 pm

I can see through the hole and doesn't look to bad just surface stained from leak above.
It' the cost I am worried about.
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Sun Apr 01, 2012 8:26 pm

janc wrote:
Mechanically the car is sound, is it worth the time and money to fix or should I save to get a complete respray?

Thank you for any help.

Jan

welcome to the first and foremost law of E30 ownership.

no point saving for a complete respray until the repair work is done
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Apr 01, 2012 8:31 pm

If it's a sport, then it's worth fixing. The cars are worth a lot more than standard E30s.

But if you've got Rust somewhere, you'll have it in other places too. I suggest getting a poking screwdriver out and checking all the other rot spots:

http://www.e30zone.net/e30zonewiki/index.php/Rust
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Sun Apr 01, 2012 8:47 pm

Grrrmachine wrote:If it's a sport, then it's worth fixing. The cars are worth a bit more than most standard E30s.
I resent that.. ALL E30's are worth fixing as long as it is not going to cost the earth.. it depends how much the car is worth to you..

and it does sound a fairly straightforward repair.. but yes you should have a poke about behind the fusebox etc.. check the wiki..
and second, best bet, find a local decent bodyshop (not a big ridiculous pricey one, a decent local one will be ideal, if in doubt ask a taxi driver :) ) roll down there and let them have a look and get a quote for the repair..
Image
User avatar
janc
E30 Zone Newbie
E30 Zone Newbie
Posts: 112
Joined: Sat Sep 10, 2005 11:00 pm
Location: Falkirk

Post Sun Apr 01, 2012 8:50 pm

Thank you for the info. Any costings? I know different places will charge different rates. just a rough guide will help.

I have £1000 I can get hands on immediately. Roughly how far will this go? Welding work and another £800 paint?

Could break and keep money. But then I will have no sport! What to do?
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Sun Apr 01, 2012 8:52 pm

If it was mine, and I was going to go through with the work, i'd be stripping out the dash and properly checking it out at the front as sometimes they dont look all that bad until you properly poke.

Then you'll now the extent of the rust, and be able to get a better estimate of cost to sort it.

Pictures would help too :twisted:
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Sun Apr 01, 2012 8:59 pm

as above, it's far too early to even try to make a decision until you have given her a thorough examination
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Apr 01, 2012 9:41 pm

price can vary wildly, which is why no-one here will give you a specific number - especially if you haven't provided pics.

IF the car only has a hole in the scuttle, then a localised repair and paint job will cost a few hundred, and you may be able to pick up a boot lid in your colour from the reputable traders on here.

But don't spend a penny until you've checked the rust spots; especially, as has been mentioned by Jim and Tom, the bulkhead under the fuse box and behind the glove box.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Apr 01, 2012 9:45 pm

Kit off, wings off, dash out, carpets out, boot liner out, arch liners out, and then you might get some idea as to whether it's viable to repair,
pukar
E30 Zone Addict
E30 Zone Addict
Posts: 2225
Joined: Tue Sep 08, 2009 11:00 pm

Post Mon Apr 02, 2012 12:30 am

Brianmoooore wrote:Kit off
...only on a warm day mind

winkeye
Image
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Mon Apr 02, 2012 7:19 am

The onlyy thing you should be buying if you don't already own them is a hammer, screwdriver, grinder and a knot-brush




Strip out all the bits brian mentioned and get to work on anything that looks to have "surface rust" - guaranteed most of it won't be.

Pay particular attention to the bulkhead ( as you already have rotten scuttles its highly likely this will have caused further issues in the bulkhead, inner wing seams, and the floor ).


Good luck.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Mon Apr 02, 2012 9:26 am

Nice example just so you dont think, 'Ahh, it cant be that bad'...


Image

The actual rust was surface looking... Scraped at it, then lump hammers and it fell through on the floor and it goes further than that. I just didnt bother anymore as that was enough to know it was rusty.

Only way to do it is to strip it out. Which wont take long! The Wiki has guides on all kinds of things.

But I'd start by getting the carpet out first and then you'll see most of the bulk head. You'll want the dash out too but atleast getting the carpet out will let you know how you feel about the car if you find rust!
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Mon Apr 02, 2012 10:32 am

RIP Scottish turd, you have had a good innings :(


Don't forget the pics, there is nothing better than pics of someone elses rusty turd ! :)
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Apr 02, 2012 12:25 pm

i bought a new rear panel from bmw myself not long ago, and had it put in, cant remember off hand but think the panel was £140/ 160 or so , a pattern one was 90 odd i think

like above a proper strip down and check of the car is needed,top to bottom inspection, its worth doing to a sport, rather than look at a grand immidiatly, look at it as having to take the car off the road and look at a year or so to sort everything and sort it properly, with the scuttle hole then as above ideally youl need the dash out and a proper bulkhead inspection

but be prepared, a grand will be eaten up , if your very lucky youl spend a grand before any paint, get the car rock solid and all sorted, then paint it, if its a sport...its worth doing and keeping hold off, with more being broken each year,they are worth saving

its do or die !
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Apr 02, 2012 3:01 pm

I would wager money on it being worse once you start getting the kit off.. 1k might get you 1/2 of the welding done if you are lucky.
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
kitch
E30 Zone Regular
E30 Zone Regular
Posts: 878
Joined: Sat Nov 01, 2008 11:00 pm

Post Mon Apr 02, 2012 7:17 pm

As has been said, stirp it down! I thought my car was fairly clean, stripped it down this winter and it was fairly rusy. It's in for welding atm and the estimate is £1000-1200 and I've already bought all the panels to replace!
Image
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Mon Apr 02, 2012 7:57 pm

Don't listen to all the scary stuff.. And don't be put off.. Find a decent local bodyshop and get them to do the welding (it's always cheaper) and find out everything before you panic.. I've got no rust under my kit.. All sports aren't rusty turds :)
Image
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Mon Apr 02, 2012 8:19 pm

Jhonno wrote:I would wager money on it being worse once you start getting the kit off.. 1k might get you 1/2 of the welding done if you are lucky.
Rear pannel and scuttle = MUCH more hidden!

These coonts love hiding rot!

Even ones that have had a pro rebuild them :eek:

My bet is your waisting your time fixing whats obvious until its had a full screwdriver treatment.

Sorry mate but I doubt your 1k will fix the rust properly :(
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
Farbbm
E30 Zone Newbie
E30 Zone Newbie
Posts: 216
Joined: Sun Feb 24, 2008 11:00 pm
Location: bedfordshire

Post Tue Apr 03, 2012 8:44 pm

My sport is currently in a local body shop having new rear arches, new sills and repairs to the back panel, It can depressing especially when as I did got the call to go in the other week to approve further work but it will be worth it. If you can't afford to do it all in one go try and agree a priority with your chosen bodyshop. That way you can spread the costs. Since I've had mine I've had the interior out and the floor welded, new dash (my had a crack) and now the arches etc.

I wish the best of luck with what ever you decided.
User avatar
retrospeedshop
E30 Zone Newbie
E30 Zone Newbie
Posts: 25
Joined: Sat Feb 11, 2012 11:00 pm

Post Sun Apr 22, 2012 1:16 am

i run a workshop doing vw restoration, (this isnt a business plug btw)
some of the costs being banded about for just welding work seem steep?!
for scuttle repairs, you will have other rust lurking, check front edge of floor, as alot go there, the more you can do yourself prep wise the cheaper it will be...stripping it down to be able to safely cut and weld is time consuming hence expensive!
a mate is doing a mini and is cutting out the rot, he is renting a corner of the workshop off me for beer tokens and is prepping everything so all im doing is the welding work...
his bill will be very low as he is doing all the time consumming work.

and an e30 will have alot less rust on it than most things im putting back together!
recently did a t2 panel van, that had most of the roof edge replaced, complete front panel, inner bumper, outer and lower front panels, door reskins, sections of floor and outriggers, most of the engine bay replaced... there was around £750 in pre formed panels alone, then hand made sections etc and the bill for welding, paint prep and solid blue paint was around £3k inc parts...