Changing a 318 m40 to 325, I've checked pin 20 and its a red-yellow wire...... So am I right in thinking I can plug the m20 loom in without fire??
As this, on some cars is an earth to behind the glovebox.
T I A
pin 20 question
Moderator: martauto
-
e30-EVN
- Old Skooler

- Posts: 3382
- Joined: Sun Dec 13, 2009 11:00 pm
- Location: S.Wales
A 2 door e30 with 8 cylinders, what could be better

-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
As long as there is no earth on the car side you should be fine. You only need power there if the car has ABS
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If the red/yellow is on the body side, then you need to arrange a red/yellow to pin 20 on the engine loom as well, if it's not already there.
If the red/yellow is on the engine loom side, check pin 20 on the body side for a brown earth wire.
If the red/yellow is on the engine loom side, check pin 20 on the body side for a brown earth wire.
-
e30-EVN
- Old Skooler

- Posts: 3382
- Joined: Sun Dec 13, 2009 11:00 pm
- Location: S.Wales
Just checked the doner engine loom, yellow-red is present in pin 20.
Red-yellow is also present car side pin 20
But car is NOT abs equiped.........
Red-yellow is also present car side pin 20
But car is NOT abs equiped.........
A 2 door e30 with 8 cylinders, what could be better

