can anyone advise plz when i get to between 35 to 40 mph im getting a rumble from the car that all bearings are fine its not the engine
its quite a deep rumble could it be the prop ?
e30 rummble at speed
Moderator: martauto
-
Speedtouch
- Old Skooler

- Posts: 14126
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Could be prop or diff.
Presumably you've tried pressing in the clutch and just coasting along at the speed that the rumble occurs?
Try draining the diff oil and refill with new stuff.
Presumably you've tried pressing in the clutch and just coasting along at the speed that the rumble occurs?
Try draining the diff oil and refill with new stuff.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Could even been the handbrake - I've had that one in the past.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Jos
- E30 Zone Camper

- Posts: 1104
- Joined: Mon Jan 17, 2005 11:00 pm
- Location: Belfast
no Wiki page for that Grr? 
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
'94 e36 tree climber
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Are your wheels balanced?
-
acidman
- E30 Zone Newbie

- Posts: 11
- Joined: Thu Mar 29, 2012 11:00 pm
wheels balanced new tyres its auto so cant coast it but when i drop below 35mph rumble stops its actualy vibrating through the car the cars been stood 6 years in a dry barn and put back to mot condition and just passed with minor advise ill change the diff oil tomoz and check the handbrake front to back it may be just grabbing on the drum im thinking inline with you speedtouch could be prop as i dont seem to be able to pinpoint it to left or right
-
Speedtouch
- Old Skooler

- Posts: 14126
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Try tightening the prop to diff flange bolts. I had the ones on my Minor work loose, and just happened to discover them on a chance checkover. I replaced the standard nuts with Nylocs to be on the safe side.
I heard of a guy on RetroRides with a big Merc coupe who had the prop fall off at high speed!
I heard of a guy on RetroRides with a big Merc coupe who had the prop fall off at high speed!
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
