a bit of a longshot here, had my m52 conversion done, engine runs and car drives, all be it without an exhaust. its been sitting for over two months now.
anyway long story short ive rung around a few exhaust shops and the minimum quote im getting is £400 just for downpipes!!!
i've got a full scorpion le mans system i want to put on the car, but i cant justify £400 just for downpipes.
my manifold has already been modded and sits closer to the cylinder head, and the flanges are chopped.
is there anyone out there that can make me a set of downpipes up that i can mate to my scorpion system??
i dont mind travelling within reasonable distance (im in london) as i have a friend with a towtruck so we can transport the car.
the cars been sitting too long now and the urge to drive it is driving me mad.
i need downpipes made up
Moderator: martauto
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
should of coughed up for the fritzs bits m52 e30 manifold as that comes with downpipes as ther will be alot of labour involved thats why the price is so high 
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
randomspeedfreak
- E30 Zone Regular
- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
i took my car with bare manifolds to infinity exhausts in bristol
they did downpipes, a crossover and a twin pipe system with a back box, all in 50mm stainless for £400. you can choose which tips you want exactly - they make them there in front of you.
id highly reccomend them
they did downpipes, a crossover and a twin pipe system with a back box, all in 50mm stainless for £400. you can choose which tips you want exactly - they make them there in front of you.
id highly reccomend them
-
nickso
- E30 Zone Addict
- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
PM Danthe, he does downpipes for M52's
'88 e30 328i M52 track bint.
-
ross_jsy
- Married to the E30 Zone
- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
DanThe does them. A lot cheaper than that too.
Not sure how they will fit with the Scorpion system though. Might need the m3 flange. I'll confirm this weekend and try and get some pictures as I'll be fitting them to the same exhaust
Not sure how they will fit with the Scorpion system though. Might need the m3 flange. I'll confirm this weekend and try and get some pictures as I'll be fitting them to the same exhaust
-
DanThe
- E30 Zone Team Member
- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
If its a 325i system they bolt right up, 2 inch aluminised exhaust grade tube, manifold work is in stainless.
These will bolt up to any 325i 3 piece system which is more than adequate for 2.5 and 2.8 engines
If you want to use an M3 system I can supply different front pipes and an M3 style flange
These will bolt up to any 325i 3 piece system which is more than adequate for 2.5 and 2.8 engines
If you want to use an M3 system I can supply different front pipes and an M3 style flange
Last edited by DanThe on Thu Oct 17, 2013 8:37 pm, edited 3 times in total.
-
Duke137
- Married to the E30 Zone
- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
I recommend Dan's, the workmanship is A1 for the price!
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
strictlyxsi
- E30 Zone Newbie
- Posts: 42
- Joined: Mon Dec 05, 2011 11:00 pm
How much do you sell these exhaust dan ?
-
Bela
- E30 Zone Newbie
- Posts: 157
- Joined: Mon Jul 05, 2010 11:00 pm
Hi Dan,
How much for downpipes on M52 B28 motor?
How much for downpipes on M52 B28 motor?
-
E30_Aza
- E30 Zone Regular
- Posts: 858
- Joined: Sat Mar 04, 2006 11:00 pm
- Location: Croydon
I went to long life and they quoted me £120 for downpipes on my m20
