if they're 6 pot springs then your probably right. i'am sure they will beRav335uk wrote:Needs a 6 pot up front Pete. to lower the front down.![]()
Latest arival at the yard
Moderator: martauto
-
Alex
- Married to the E30 Zone

- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
m42 is the way forward.....
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Maybe, albeit at a snails pace.sweep wrote:m42 is the way forward.....

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Why didn't you cut a couple more coils off bruv? 
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
fancy a turd ,oops i mean third calypso ?
http://www.ebay.co.uk/itm/1991-BMW-320i ... 3a70202d64
like buses these fooka's
http://www.ebay.co.uk/itm/1991-BMW-320i ... 3a70202d64
like buses these fooka's

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
Mick are you been sarcastic......? im on my way to wakefield
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
pot - kettle


m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Mattyc
- E30 Zone Newbie

- Posts: 123
- Joined: Fri Feb 24, 2006 11:00 pm
- Location: Sheffield
Looks good Pete, get some new centre cap badges on...
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
Centre caps now have new badges.
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
Minor update....in gutting the rear arch's out cleaning them out with the wire brush and re- stone guarding them after some cutting out and plating then stone guarding and painting them back in calypso.tank neck is scabby so whilst its off i have a good used one and also a new fuel neck top rubber boot now ready to be fitted.
Interior and dashboard is also getting swopped too.
Interior and dashboard is also getting swopped too.
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
Had this in today


-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
She an old girl 
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
sweep wrote:Had this in today
Breaker?
Pm me about the splitter if it is
-
capri_rob
- Married to the E30 Zone

- Posts: 9681
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Looks good - early one too - please tell me its not a fragger 

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
No no not el frager ive been doing some work on it,the splitter isnt for sale ive just fitted a later valance as the owner wanted that on!
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
is that James Henna turd ? i think it's been spoiled with the single valancesweep wrote:Had this in today
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
I personally think it looks better
-
jlb
- E30 Zone Newbie

- Posts: 197
- Joined: Sun May 27, 2007 11:00 pm
Granted in this pic it doesn't look all that! but in reality it looks alot better! The standard reseeded chin on 323's doesn't make the most of the e30's best feature - the front end...IMO.e30topless wrote:is that James Henna turd ? i think it's been spoiled with the single valancesweep wrote:Had this in today
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
I no im no bavid dailey but come on... 
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
it's just my opinion James, don't take it seriousjlb wrote:Granted in this pic it doesn't look all that! but in reality it looks alot better! The standard reseeded chin on 323's doesn't make the most of the e30's best feature - the front end...IMO.e30topless wrote:is that James Henna turd ? i think it's been spoiled with the single valancesweep wrote:Had this in today
on a rare early 83 car it just seems right to keep it looking like it has done for the last 29 years,
the lovely old turd has made it this far without being altered
I kinda like the old style front

-
jlb
- E30 Zone Newbie

- Posts: 197
- Joined: Sun May 27, 2007 11:00 pm
No appreciate the opinion Steve! I liked it standard aswell...just had a jimmy hill (which looks great on the chrome cab) lying around and Pete had a solid valance so thought why not! It's a well looked after 55k henna e30, so yeah it's a rare car...but it's a daily, so i'm not precious over its originality...Just want it to look and go well.
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
And another visitor...




-
Kedge
- Old Skooler

- Posts: 7702
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Got to say that Henna 323i looks better with the later valance and Jimmy Hill 

