manual box conversion
Moderator: martauto
just a quick one im looking at converting my e30 to a manual is it simple job the engine and box are on a bench already so i can get into the bay and makes it easy getting the box apart and back together just some advise reli please
it's easy enough,the brake bar is a fiddle when fitting the manual pedal box.
you'll need a spigot bearing not sure what size as there are two types so check 1st.
you'll need a flywheel,clutch,manual pedal box with master cylinder and fluid pipe to fluid bottle.
the metal pipe across bulkhead,slave cylinder and hose,manual box and shifter ,propshaft,
think that's it ....
what engine is it ?i have loads of 4-pot conversion parts or can help with some of the list ..
you'll need a spigot bearing not sure what size as there are two types so check 1st.
you'll need a flywheel,clutch,manual pedal box with master cylinder and fluid pipe to fluid bottle.
the metal pipe across bulkhead,slave cylinder and hose,manual box and shifter ,propshaft,
think that's it ....
what engine is it ?i have loads of 4-pot conversion parts or can help with some of the list ..
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Grrrmachine
- E30 Zone Wiki / Team Member
- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install