Headunit wiring

Need technical Q/A then you're in the right place

Moderator: martauto

cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Mon Feb 27, 2012 6:29 pm

I still have the original wiring plugs, however my new headunit runns of a different system so I'll have to rewire it. The two plugs apply to 1. Speakers and 2. Power and ???

Basically, the second plug has 5 wires going into it. Does anyone know which colour does what?

Thanks
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Mon Feb 27, 2012 6:31 pm

diable wrote:You should be able to get an adaptor cable, makes a neater and easier job.
It also costs.
Last edited by cee on Mon Feb 27, 2012 9:12 pm, edited 1 time in total.
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Feb 27, 2012 9:07 pm

cee wrote:
Basically, the second plug has 5 wires going into it. Does anyone know which colour does what?

Thanks
Image
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
bimmaman
E30 Zone Regular
E30 Zone Regular
Posts: 698
Joined: Tue Mar 28, 2006 11:00 pm
Location: Devon

Post Mon Feb 27, 2012 9:08 pm

:roll:

Everytime I remove a headunit and see a jumble of wires held together with insulation tape, I curse whoever was scabby enough not to just buy a set of adapter cables and do the job properly in the first place.

If anything, if you come to sell the car and wish to keep the headunit, its a nice easy job to fit in the next car you get... Unless the previous owner was a cnut and decided to do a bodge job and cut the cables... :x
Image
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Mon Feb 27, 2012 9:14 pm

Thanks Kam, that's brilliant.

bimmaman, this is why you don't be a tool and use a chocolate block. Then when you come to get a different car you just reconnect the original plugs to the block... Not difficult. Besides, I'm keeping this car 'til it rots.


I also fail to see how I could connect an adapter to two buggered plugs that fall out whenever the road gets rough. There's a reason for me doing it this way, I do think before I post.
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm