removing convertible door
Moderator: martauto
-
BMW_E30vert
- E30 Zone Regular

- Posts: 705
- Joined: Thu Mar 11, 2010 11:00 pm
- Location: Greater London
how do you remove a window from a cab drivers door? someone broke my window, i have a spare door but for the life of me cant figure out how to get it off 
-
BMW_E30vert
- E30 Zone Regular

- Posts: 705
- Joined: Thu Mar 11, 2010 11:00 pm
- Location: Greater London
sorry wrong section mods could you please move to right section sorry 
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
remove the door card. several (3 or 4??) screws, the ones visible in the arm/rest and one hidden behind the electric mirror switch, prise it out with a small screwdriver and you wil see the screw behind. Cant fully remrmeber but maybe need to remove the door handle, if so the plastic surround part pulls backwards and off, then the fixing is visible...
then carefully remove the press fittings, pull the card from the bottom slowly and you wil see/feel the fittings, pull close to the fitting carefully and they will pop out (or most likely break) then once al out lift the card upwards so the top fitting at the window comes off. pull it away slowly and remove any door pull levers etc from behind.
now remove the plastic sheet stuck to the inner door panel and the window lifter wil be visible (helps to partially raise/lower the thing until you get the best access.) removal of the window shoudl be self explanitory then maybe you will need to adjust it after, wiki section has guides on how to do this.
good luck
oh and moved for you
then carefully remove the press fittings, pull the card from the bottom slowly and you wil see/feel the fittings, pull close to the fitting carefully and they will pop out (or most likely break) then once al out lift the card upwards so the top fitting at the window comes off. pull it away slowly and remove any door pull levers etc from behind.
now remove the plastic sheet stuck to the inner door panel and the window lifter wil be visible (helps to partially raise/lower the thing until you get the best access.) removal of the window shoudl be self explanitory then maybe you will need to adjust it after, wiki section has guides on how to do this.
good luck
oh and moved for you

-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
yes, three screws as mentioned. remove the door pull, door handle surround (slides rearwards, then off) and the door locking pin.
then carefully free the poppers (i have replacements if yours break, as is likely, as mentioned above), then carefully peel back the plastic membrane (patience and "slowness" is the secret, if you wish to reuse it, as they tear very easily) and reveal the 10mm nuts which hold the mechanism to the door frame.
then carefully free the poppers (i have replacements if yours break, as is likely, as mentioned above), then carefully peel back the plastic membrane (patience and "slowness" is the secret, if you wish to reuse it, as they tear very easily) and reveal the 10mm nuts which hold the mechanism to the door frame.

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
