Repairing rust patch around e30 rea tow hook.
Moderator: martauto
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
I'm not a expert in body repair, but would think, cut the rust area out with a grinder, weld a plate over, then smooth weld joins in, sand then paint.
Unless you cut the old rust out and treat it it will never fully go away.
Hope this helps a little, looks like a body shop/spray shop job either way really if you want the job done properly.
Matt
Unless you cut the old rust out and treat it it will never fully go away.
Hope this helps a little, looks like a body shop/spray shop job either way really if you want the job done properly.
Matt
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
What you will find more than likely is the tray area in the boot will be a bit rotten, so dig out the well in the right rear corner of the boot floor and have a look at the state of the metal in that where it mates to the rear panel.

