Diff sensor wire

Need technical Q/A then you're in the right place

Moderator: martauto

Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Fri Jan 27, 2012 6:55 pm

My speedo and econometer packed up today and an inspection revealed one of the wires to the diff' sensor has snapped. I did a search and it seems that I should replace the plug as well as repair the broken wire. Just wondering why I need to replace the plug?
Image

E30 zone - promoting adult illiteracy since 2004
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Fri Jan 27, 2012 7:03 pm

chances are that the plug will fall to pieces when you pull it from the diff.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Fri Jan 27, 2012 7:15 pm

Aha, that's a good reason.
Image

E30 zone - promoting adult illiteracy since 2004
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Fri Jan 27, 2012 7:35 pm

Can someone link me to it on realoem, I can't find it.
Image

E30 zone - promoting adult illiteracy since 2004
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Fri Jan 27, 2012 8:03 pm

Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Fri Jan 27, 2012 8:12 pm

Part 8 is the sensor that is triggered by the toothed cog inside the diff, he needs to change the wire itself that goes to the dash. I understand it's the same connector as the facelift sidelight, so easy fix is to find a donor/scrap car and cut the sidelight wire as far back as possible, then replace the wire and connector. By soldering new bit on.
Image
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Fri Jan 27, 2012 8:17 pm

I'm tempted to butcher my own sidelight then, much less useful than the speedo.
Image

E30 zone - promoting adult illiteracy since 2004
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Sat Jan 28, 2012 5:55 am

Check Plugs are same shape first before you cut!!!
Image
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Sat Jan 28, 2012 4:03 pm

Decided against cutting my light wiring and I've no hope of getting to a breakers any time soon, so a part number for the plug would be very useful. I guess it's #19 on the link that Kam posted but there's no number or description for it.
Image

E30 zone - promoting adult illiteracy since 2004
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sat Jan 28, 2012 5:43 pm

just post a wanted ad on here, a few zoners have breakers