Brianmoooore wrote:The brake switch and clutch switch are simply connected in series, so to omit the clutch switch, just connect the wires together.
I've just looked at some wiring diagrams:
When the brakes are pressed the brake switch sends a +12v signal through the (closed when clutch engaged) clutch switch (wired in series) to the CC unit which disengages with +12v signal.
When driving the CC unit detects ground through the clutch switch (closed when clutch engaged) which is connected to earth through the brake light bulbs.
When the clutch pedal is pressed the CC unit is disconnected and senses neither live nor ground and disengages.
Wired correctly cruise control will not work with failed brake light bulbs.
This seems like an odd arrangement but does allow the CC, through just one input wire to detect three conditions (brakes applied, normal driving, clutch pressed or brake bulbs blown)