Got an issue with the blower.
It is only workingn on no4.
I have removed the blower, freed it up and lubricated so it runs freely and works from a 12V supply as per loads of other posts.
The resisitor has been also been replaced with a known good one from Adit and still no joy.
The wiring to the resistsor looks to be intact but as it disappears behind the centre console I have no way of knowing for sure.
Is there any tests that can be done or any fuses that need to be checked also?
Blower fan No 4 Only
Moderator: martauto
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Resistor.
Kedge has a good spare for sale as he had the same problem. Drop him a PM mate
http://www.e30zone.net/modules.php?name ... file&u=601
Kedge has a good spare for sale as he had the same problem. Drop him a PM mate
http://www.e30zone.net/modules.php?name ... file&u=601
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Thanks Duke.
The resistor was taken out from Adits touring and was definetly working the day he posted it.
So i'm a little reluctant to buy another, is there deinetly nothing else that can be tested or checked.
The resistor was taken out from Adits touring and was definetly working the day he posted it.
So i'm a little reluctant to buy another, is there deinetly nothing else that can be tested or checked.
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Long shot, but since you've tried the two obvious things is it worth trying the switch on the center console?
You also tried the motor on anything less than 12v? All that proves is that the motor works on full power which you already know by the fact it working on position 4. The resistor steps down the power to give a slower speed, this might not be enough to turn a tired old motor.
You also tried the motor on anything less than 12v? All that proves is that the motor works on full power which you already know by the fact it working on position 4. The resistor steps down the power to give a slower speed, this might not be enough to turn a tired old motor.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Kedge, you have a good point about the switch and power supply not sure how I would go about checking this though
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Stick a resistor on the 12v supply your using 
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Being a total noob with electrical stuff, do you mean use the exisitng one somehow? Or would I need to buy one, any particluar kind etc etc.
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
When you said the motor was working to 12v i assumed you were just hooking it straight up to a battery, so what i was saying was stick a resistor on the +ve leg.
I think it's worth trying another motor in there.
I think it's worth trying another motor in there.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Sorry, Yes it works striaght from the battery, not sure where I would get a resisitor or even what it looks like. I dont have access to another motor and no zoners are anywhere near me.
Trying to avoid buying any more parts than neccessary at the moment after spunking £360 on a replacement roof yesterday.
Trying to avoid buying any more parts than neccessary at the moment after spunking £360 on a replacement roof yesterday.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
OK, a friend of mine who's a sparky came and tested the motor for me which some contraption that could send different voltages to the blower and it worked at different speeds.
So I think its definetly down to something wiring releated as the resistor was replaced for a known good one.
Any other ideas what I can test to get this working?
So I think its definetly down to something wiring releated as the resistor was replaced for a known good one.
Any other ideas what I can test to get this working?

