Anyone got any experiences and before and after pictures of a DIY smart repair on leather seats?
I know there are kits available from Furniture Clinic and Buffalo leather etc. But wanted some first hand feedback on how the proccess went for you and what kit you used....
It's the repairing of a hole or tear i'm interested in. Think the procedure prob goes something like:
Tidy area up.
place mesh where the hole is so that it goes under the surrounding leather
Glue down the surrounding leather to the mesh
Apply filler over mesh/hole in thin layers.
Sand down
Then re-colour
Anyone have more info, better detail and before and after pics of such a process?
Is the filler really durable? and whats the difference between air dry and non air dry kits?
Also, the leather is quite shiney, is there a way of dulling it down?
It's mid grey BMW leather on a 1988 BMW Motorsport convertible. TBH i think the panel (drivers bolster) would prob not be much more than £100 to replace but i really like the idea of tackling the job myself.
seat bolster repairs
Moderator: martauto
-
richard300
- E30 Zone Newbie

- Posts: 119
- Joined: Wed Feb 22, 2006 11:00 pm
- Location: Worthing/West sussex

325i Motorsport Convertible (For sale)
Jaguar XJ8 4.0 V8 SE
Mercedes CLK Kompressor
(AMG Sport pack)- NOW SOLD
Renault Sport Clio RS172
Ropey o
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
There was a really good thread about a year ago with someone who did the same to the seats with the filler stuff and it came up very very well.
I cant see to find it but this may help:
http://www.e30zone.net/modules.php?name ... highlight=
I cant see to find it but this may help:
http://www.e30zone.net/modules.php?name ... highlight=
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
I've no knowledge of the repair kits, or how well they stand up to subsequent use, but I strongly recommend you swap it over with the matching passenger one (easiest to swap over the whole seat base), which will usually give you an almost factory fresh outer bolster for the drivers side.
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Trimming is one of those jobs where a bad repair will stand out like a sore thumb.
Brians solution is one good and easy way - although you may struggle to find a good single leather sport seat at the right price.
Personally I'd look for another seat with enough material to recover the original bolster and give it to a professional trimmer.
I did this using a material from a"comfort" cloth seat to repair my Sports drivers seat bolster - cost about £150 at the trimmers but they did a good job.
Brians solution is one good and easy way - although you may struggle to find a good single leather sport seat at the right price.
Personally I'd look for another seat with enough material to recover the original bolster and give it to a professional trimmer.
I did this using a material from a"comfort" cloth seat to repair my Sports drivers seat bolster - cost about £150 at the trimmers but they did a good job.

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
First check with your local BMW dealer,you may get lucky and there will be a cover set in stock in Munich....but be sat down when the price is mentioned!
The foam filler will be worn/damaged as well,not much point in either repairing/patching what you have or fitting a new cover to a damaged foam.
Seats come apart with suprising ease,there should be a guide in the wiki.
The foam filler will be worn/damaged as well,not much point in either repairing/patching what you have or fitting a new cover to a damaged foam.
Seats come apart with suprising ease,there should be a guide in the wiki.
Youth is wasted on the young.
-
richard300
- E30 Zone Newbie

- Posts: 119
- Joined: Wed Feb 22, 2006 11:00 pm
- Location: Worthing/West sussex
Thanks guys......
Found this link:
http://www.e30zone.net/modules.php?name ... c&t=190394
The repair i need to do is similar to the larger of the two holes shown, but i have no cracking to worry about, and the foam seems in great condition.
I really fancy trying this repair and taking pictures and posting results as a how to guide when the time comes.
Found this link:
http://www.e30zone.net/modules.php?name ... c&t=190394
The repair i need to do is similar to the larger of the two holes shown, but i have no cracking to worry about, and the foam seems in great condition.
I really fancy trying this repair and taking pictures and posting results as a how to guide when the time comes.

325i Motorsport Convertible (For sale)
Jaguar XJ8 4.0 V8 SE
Mercedes CLK Kompressor
(AMG Sport pack)- NOW SOLD
Renault Sport Clio RS172
Ropey o
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
That was the thread I was thinking of. I want to tackle this myself but waiting till summer till I can get some decent warm weather as the garage is a bit too small to work in properly.
