BBS split rim replicas (lenso etc) closest dimensions

[svenga]

Evening all,

Finally come to my senses and decided to pick some BBS styled split rims this summer, sadly i can not afford the genuine thing, so replicas from other manufactures will have to do (better than nothing!).

Question is... had a good trawl through various websites and ebay etc, Which reasonable brand alloys of this kind are the closest to the original 15'' bbs e30 alloys which came standard or as optional extra?

Reason being is the car is sat 60mm all around, i dont want to move too far in or out on the offset and want to keep them as close as possible to the BMW dimensions (after all they did not spend millions on perfecting them i can imagine)

Closest i have found so far is 7.5J, 16'', offset 20 'Lenso' branded.

Anybody know off any closer? or have a link to any for sale?

All help highly appreciated as per!

[eko]

Lenso are shit.

Try Ronal LS,they are nice.

[Rtaylor2208]

Avoid the Dare replica wheels there has been a few posts about how poor quality they are.

[svenga]

Thanks Taylor for the warning, as for Ronals. Very nice, but i can not seem to find a 'split rim' style like the lensos, why are lensos so bad for the price? i know hteyre knock off BBS's but do they fall apart or cause problems?

[Hoobs]

Lenso are cheap for a reason. There are far nicer rims, from proper manufacturers, available for the same money. Lenso have a reputation for fracturing especially on potholes or if kerbed. It's not just what they look like that matters.

Fake splits are a bit naff anyway. My winter rims cost me £300 - brand new & in there boxes and being Borbet, they're good & strong.

[svenga]

Very nice Hoobs, im really after split rims however.

Had a spy around, OZ Vegas 16'' split rims look good, but hard to come by

Minus 2K BBS's which other 'well known trustworthy brands' have produced a split rim (or style) alloy, with the lattice centre? must be a few without falling for the 'Lenso' trap

[leeparkes]

Image splits here.

http://www.e30zone.net/modules.php?name ... ight=image

[Hoobs]

I bought these off here for 500 quid and apart from drilling out and re-tapping one bolt hole, am just doing a home refurb'. Elbow grease and Autosolve metal polish.

There are proper splits out there if you look hard enough and have a little patience.

[svenga]

I'm in talks on purchasing oz 15'' 7j offset 26 2-peice vega split rims... Without tyres £600 .. Seems very reasonable!

[mb15]

I have lenso wheels, you can get 15" 7.5 with a 20mm offset. I have run them for a good while and have no problems with the quality of them. Here's a link to my for sale ad so you can see them with a 40mm drop:

http://www.e30zone.net/modules.php?name ... c&t=211241

[Hoobs]

pics?

[mb15]

These look nice if you prefer originals over replicas. would look good with a small spacer to bring them out a bit.

http://www.ebay.co.uk/itm/RH-4x100-cult ... 33710c3b95

[Hoobs]

Much nice snide splits too.

[_Jay_]

Fake splits are a bit naff anyway. My winter rims cost me £300 - brand new & in there boxes and being Borbet, they're good & strong.

Is that all the Borbet ones cost? Are they Borbet A's? Thought they had more of a flat centre cap as well? Will have to look in to getting a set now I know they are so cheap lol.

[Hoobs]

I bought flush centre caps from Germany at £90 the set posted.

[_Jay_]

Thanks for the info so far. Did you get the wheels direct from Borbet them selves?

[Hoobs]

No, got them from a teenager in Cornwall who opted for something else. He worked for a tyre & wheel place. I can try and find his number? I'm now thinking they were 350 not 300.

I've just about finished rebuilding my BBS now. Just waiting to check they hold air with no leaky. I may be biased but they look the boll-ox!

[svenga]

Heres a pic of the 15'' OZ's with white centre..

[Hoobs]

Nice.

[leeparkes]

I bought flush centre caps from Germany at £90 the set posted.

Are these Borbets on your E21? Any more pics?

[Hoobs]

Not great pics & pre flush centre caps but you get the idea.

[Hoobs]

Just finished my track e21's BBS too. I bought them cheap off here but needed lots of work. Looks like they were split with a chisel and a hammer!

[E30S]

Lenso's are ok and look very good on E30's (a lot better than Borbet's - no one has them nowadays?). Obviously genuine BBS splits are the best but for a cost effective solution the Lenso are great (lets face it little cash around now to spend out packet on genuine BBS..)

Just my two pence worth

[Hoobs]

Borbet's - no one has them nowadays?

Another positive.

Who wants the same as everyone else?

[rob_k]

ive run dare rs' and have no issues with the quality of them they seem fine to me and look awesome with the gold look bolts.

[Hoobs]

I've read a few people have run Dare without issues but Lenso are well known for lacking quality. They might be a bit cheaper to buy initially but if you have to keep refurbing them you'll soon be out of pocket. It's not just looks that's the issue though either. It's important that all alloys are strong enough for purpose or else they'll simply buckle in no time.

[svenga]

Well I thought the OZ's looked close enough, reputable brand, so decided to get them...

Pictures to follow around april when the girls back out!