Rear disc conversion on my 318i???
Moderator: martauto
-
pel
- E30 Zone Newbie

- Posts: 125
- Joined: Sun Aug 08, 2010 11:00 pm
- Location: Hayling Island
Hi everyone, I need to do a rear disc conversion on the old 318i as im fitting an m52b28 lump, can anyone let me know the easiest way to go about this? what ill need and from what cars?
Thanks for any help you can give.
Thanks for any help you can give.
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
You'll need the trailing arms off a 325i
Best to really do this when the whole rear subframe is dropped off the car
Then it's worth changing all the bushes, wheel bearings and handbrake shoes for new.
You will also need the two new handbrake cables from an e30 325i
What gearbox are you going to use with the m52b28? Because then this is also a great time to do the diff, as the 4.27 unit small case might not be up to the job of an m52
Best to really do this when the whole rear subframe is dropped off the car
Then it's worth changing all the bushes, wheel bearings and handbrake shoes for new.
You will also need the two new handbrake cables from an e30 325i
What gearbox are you going to use with the m52b28? Because then this is also a great time to do the diff, as the 4.27 unit small case might not be up to the job of an m52
-
pel
- E30 Zone Newbie

- Posts: 125
- Joined: Sun Aug 08, 2010 11:00 pm
- Location: Hayling Island
Thanks for the help, would i be better off transfering the whole rear set up from an e30 325i then? including the diff as this is something iv not yet decided on?
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
Well you don't really have to, all you need is the trailing arms from the 325i, which have the bearing/hub/handbrake assembly/calipers and discs all on.
The subframe is the same. Your driveshafts will still work when swapping to the larger case diff from a 325i.
It would be easier to get the whole rear end of the 325i and pop it on...but at the end of the day, it makes sense to replace the bushes and bearings and other bits while it's all out, so everything is going to have to come apart anyway.
The subframe is the same. Your driveshafts will still work when swapping to the larger case diff from a 325i.
It would be easier to get the whole rear end of the 325i and pop it on...but at the end of the day, it makes sense to replace the bushes and bearings and other bits while it's all out, so everything is going to have to come apart anyway.
-
pel
- E30 Zone Newbie

- Posts: 125
- Joined: Sun Aug 08, 2010 11:00 pm
- Location: Hayling Island
Thats brilliant mate thanks alot for your help, ill start searching for the parts.
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Pel if your doing an M52 you really shuld start to think about what gearbox/diff setup youll be going for.
If you use the M52 box youll need a high ratio diff such as E30 M3 or Z3M etc.
Whereabouts are you located?
I have rear disc setups available.
If you use the M52 box youll need a high ratio diff such as E30 M3 or Z3M etc.
Whereabouts are you located?
I have rear disc setups available.

-
pel
- E30 Zone Newbie

- Posts: 125
- Joined: Sun Aug 08, 2010 11:00 pm
- Location: Hayling Island
Hello mate,
Im not sure what box would be best, do you have any idea whats best to go for? to be honest im trying to get everything up together before fitting the engine and box like brakes and suspention, the car is going to be for some fun on the track but also will be road legal,
I live on Hayling Island on the south coast about 20 minutes from the GOODWOOD race track. where abouts are you mate?
Im not sure what box would be best, do you have any idea whats best to go for? to be honest im trying to get everything up together before fitting the engine and box like brakes and suspention, the car is going to be for some fun on the track but also will be road legal,
I live on Hayling Island on the south coast about 20 minutes from the GOODWOOD race track. where abouts are you mate?
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
For the Discs:
http://www.e30zone.net/e30zonewiki/inde ... conversion
For the Diff:
http://www.e30zone.net/e30zonewiki/inde ... ferentials
For the M52 engine swap:
http://www.e30zone.net/e30zonewiki/index.php/M5x
http://www.e30zone.net/e30zonewiki/inde ... conversion
For the Diff:
http://www.e30zone.net/e30zonewiki/inde ... ferentials
For the M52 engine swap:
http://www.e30zone.net/e30zonewiki/index.php/M5x
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Miles away from you mate,im in South Devon.pel wrote:Hello mate,
Im not sure what box would be best, do you have any idea whats best to go for? to be honest im trying to get everything up together before fitting the engine and box like brakes and suspention, the car is going to be for some fun on the track but also will be road legal,
I live on Hayling Island on the south coast about 20 minutes from the GOODWOOD race track. where abouts are you mate?
Plenty of guys your way though and disc conversions are plentiful so you wont have trouble finding one.
As a guide id look to pay around £50-60 for a pair of complete rear arms.
Regarding which box to choose.Ive got the M52 in mine along with E30 M3 diff(3.25 ratio) although mine is geared more suited for family/daily driving.
Plenty of other options for you though.If I was on a budget(diff £) id go for an M42 318is gearbox with either a 3.64 3.73 or 3.91 diff(all from standard E30).
Have a look through the engine swaps section,mountains of info in there

-
pel
- E30 Zone Newbie

- Posts: 125
- Joined: Sun Aug 08, 2010 11:00 pm
- Location: Hayling Island
Thanks alot for all this info fellas,
eko how much are you looking for for your rear disc set up? iv got a mate picking up some furniture over that way in a couple of weeks?
eko how much are you looking for for your rear disc set up? iv got a mate picking up some furniture over that way in a couple of weeks?
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
£60 would buy a pair from me but they were carefully removed so no cut flexi`s or handbrake cables.pel wrote:Thanks alot for all this info fellas,
eko how much are you looking for for your rear disc set up? iv got a mate picking up some furniture over that way in a couple of weeks?

-
pel
- E30 Zone Newbie

- Posts: 125
- Joined: Sun Aug 08, 2010 11:00 pm
- Location: Hayling Island
That sounds good to me mate ill find out exactly when he's over your way and give you a shout so we can sort something out, would that be ok?
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
No problem matepel wrote:That sounds good to me mate ill find out exactly when he's over your way and give you a shout so we can sort something out, would that be ok?

-
suedenim
- E30 Zone Regular

- Posts: 788
- Joined: Mon Nov 08, 2010 11:00 pm
- Location: London
Are you fitting 51mm front struts at the same time?
1982 E21 316 Baltic Blau
1989 318i 2 Door Sterling Silber
Feedback: http://www.e30zone.net/modules.php?name ... highlight=
1989 318i 2 Door Sterling Silber
Feedback: http://www.e30zone.net/modules.php?name ... highlight=
-
pel
- E30 Zone Newbie

- Posts: 125
- Joined: Sun Aug 08, 2010 11:00 pm
- Location: Hayling Island
do 51mm struts need to be fitted??
