help with vibration

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
bradj6662
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Sun Aug 14, 2011 11:00 pm
Location: doncaster

Post Mon Jan 23, 2012 7:31 pm

:x hi all im brad from doncaster i have a 1990 320i coupe which ive just done an engine conversion to a 325 i used full engine, box and front part of prop from a 325i and my rear part of my prop is the stock 320i. so... heres my problem, i have a vibration which i think is coming from the prop. i aligned both uj's straight as you look down the prop, replaced the dohnut and the CSB to no avail! any help would be much appreciated
thanks in advance
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Jan 23, 2012 7:44 pm

if you have mix & matched props, it may well be out of balance.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
bradj6662
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Sun Aug 14, 2011 11:00 pm
Location: doncaster

Post Mon Jan 23, 2012 7:47 pm

how do i balance it? is there a chance it could be 180 degrees out?
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Jan 23, 2012 7:48 pm

you would need to get someone that has the machinary to balance it. not something you can do yourself.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image