inner plastic arch
Moderator: martauto
-
mani
- E30 Zone Camper

- Posts: 1143
- Joined: Mon May 26, 2008 11:00 pm
- Location: London
how do you remove the plastic nut that is holding the inner plastic arch i tried a socket set didn't work tried some pliers didn't work (i am trying to remove the front right inner arch ) can anyone help
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
It should twist off like a normal nut. Brute force and wiggling!
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
its 10mmmani wrote:how do you remove the plastic nut that is holding the inner plastic arch i tried a socket set didn't work tried some pliers didn't work (i am trying to remove the front right inner arch ) can anyone help
there are 2 btw
yours must be rounded?
probably cut them off and replace with another
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
It's a self threading nut on a very coarse thread. The threaded steel pin is quite fragile,and usually breaks off if the nut has seized, so I presume your problem is that the thread has stripped.
You will need to grip it with pliers and pull as you turn, or cut it off.
You will need to grip it with pliers and pull as you turn, or cut it off.
-
mani
- E30 Zone Camper

- Posts: 1143
- Joined: Mon May 26, 2008 11:00 pm
- Location: London
thanks guy yeah mines is rounded i think im guna have to cut it off
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Molegrips - the bodgers friend - but will do the job in this instance - blast it with WD40 first
Don't grip it too hard or you will definately snap the thread off - it may snap anyway thats just the way it goes.
Don't grip it too hard or you will definately snap the thread off - it may snap anyway thats just the way it goes.

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Heat gun
WD40 wont get in until it starts to move
WD40 wont get in until it starts to move
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
It should be plastic.
If it ain't broke..
Fix it till it is
Fix it till it is
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
what is a good thing to do, is replace all the fittings on all the arch liners for new ones, only costs a couple of quid for new nuts and the metal screw bolts for the front lower section ones that rust and clean brackets with rust treatment and paint them
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
New spire clips, generously coated with wax, and nice new shiny stainless steel self tappers and washers.polsta wrote:what is a good thing to do, is replace all the fittings on all the arch liners for new ones, only costs a couple of quid for new nuts and the metal screw bolts for the front lower section ones that rust and clean brackets with rust treatment and paint them
