Hello All,
I have tried using the search function for this which does not seem to be working at the moment - forgive me if this is a topic that has already been covered.
Does anyone know if front seats from a saloon can be modified to be used in a coupe? And if so what is involved in the conversion?
I believe they are a direct fit at the base, but know they do not have the tilt function that is needed to allow passengers into the back of the car. Could this be retrofitted using parts from a coupes front seats?
Advice on this would be most appreciated,
Regards,
adil
Saloon front seats in a Coupe
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The saloon seats already have the tilt mechanism. They just missing the cables and levers to release it.
The two door seat back frames are the same as four door ones, but with extra bits welded on.
You can either change the four door seat back fabric onto a two door frame, or bodge about fixing the missing brackets to the four door frame.
The two door seat back frames are the same as four door ones, but with extra bits welded on.
You can either change the four door seat back fabric onto a two door frame, or bodge about fixing the missing brackets to the four door frame.
-
adil325i
- E30 Zone Regular

- Posts: 449
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Croydon, LDN
Hi Brian,
Thanks for that - sounds like its possible.
Will give it a go, and see how it goes.
All the Best,
adil
Thanks for that - sounds like its possible.
Will give it a go, and see how it goes.
All the Best,
adil
