just going through every thing on one of my e30s ready to mot it and got no indicators.
hazards work fine
any ideas cheers
indicators not working
Moderator: martauto
-
RichIS
- E30 Zone Regular

- Posts: 397
- Joined: Sun May 07, 2006 11:00 pm
- Location: gloucestershire
Injections nice....but I'd rather be blown ;)
-
chh137
- E30 Zone Squatter

- Posts: 1502
- Joined: Mon Apr 18, 2011 11:00 pm
- Location: deepest darkest derbyshire
FUSE?
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
-
RichIS
- E30 Zone Regular

- Posts: 397
- Joined: Sun May 07, 2006 11:00 pm
- Location: gloucestershire
did a search on the wiki n didnt find that lol... anyway sorted now was passanger side repeater not working gave it a wiggle now everythings fineGrrrmachine wrote:http://www.e30zone.net/e30zonewiki/inde ... Indicators
Injections nice....but I'd rather be blown ;)
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
A non working repeater won't affect any of the rest of the indicators!
-
RichIS
- E30 Zone Regular

- Posts: 397
- Joined: Sun May 07, 2006 11:00 pm
- Location: gloucestershire
thats what i thought but all i did to fix was put hazards back on seen side repeater not working gave it a wiggle/ twist from inside wing started flashing turned off hazards tryed indicators again and all operate fine now :s
Injections nice....but I'd rather be blown ;)
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
I reckon your hazard light switch could be playing up.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Almost certainly! It sits there all year doing nothing, then, when you do your pre MOT checks, gets pushed, and then released again. A bit of corrosion on the contact that feeds ignition switched power to the indicator relay, and the indicators won't work.johnl320 wrote:I reckon your hazard light switch could be playing up.
The switch is easy to open up, clean and lubricate, if it gives further trouble.
