Before I start the car is a 89 325i Cab which at some point over the years had all the central locking solenoids removed for some unknown reason.
For a while now I have been trying to resolve the problem of not being able to lock the drivers door. I put it down to a faulty barrel and bought a full lock set off another zoner in known working condition.
Well fitted the new barrel and it still wont lock.
When looking at the latch mechanism within the door when locking the door via the key the barrel does not push the latch down far enough before the spring flips the barrel arm to the deadlock postion.
This has me totally stumped. It looks like there is too much resistance on the latch.
Please please please help. I am getting pretty fed up trying to get it working now.
Drivers door lock problem. Not Central Locking
Moderator: martauto
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Remove the latch from the door,clean and lubricate,work by hand until free.
Youth is wasted on the young.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Malc, how do I remove the latch? Theres not a lot of room inside the door to work.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
After several hours of trying to get the latch removed I cant get the latch out of the door because of all the joining metal bars that link everthing.
I removed the 3 screws in the door jamb,removed the lower bolt holding the window guide rail and the bolt that holds the plastic block that connects the metal bars from the inner door handle and the inner door lock pin.
Am I missing something, I cant for love nor money get the damn thing out
Is it possible that because the car originally had central locking that it has to have it reinstated to lock the drivers door with the key? Remember I have no actuators in the car at all alothough from what I can tell everything else is there.
I removed the 3 screws in the door jamb,removed the lower bolt holding the window guide rail and the bolt that holds the plastic block that connects the metal bars from the inner door handle and the inner door lock pin.
Am I missing something, I cant for love nor money get the damn thing out
Is it possible that because the car originally had central locking that it has to have it reinstated to lock the drivers door with the key? Remember I have no actuators in the car at all alothough from what I can tell everything else is there.
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
It sounds like the barrel arm is fouling the micro switch housing but you'll need a helper on the outside with the key, door closed and window up. With the barrel out you should be able to flip the latch easily. Best of luck getting it back together.
If it ain't broke..
Fix it till it is
Fix it till it is
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Sorry should have mentioned the barrel is already out as is the metal bracket thing that goes around it. The latch is stiff to operate which is the sourceof the problem as the barrel flips to the deadlock position skipping the locking of the door completely
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
The solenoids can get stiff but if they were removed from the locks.. got me stumped, sorry.
If it ain't broke..
Fix it till it is
Fix it till it is
