pin 20 - earth question

Need technical Q/A then you're in the right place

Moderator: martauto

e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Jan 06, 2012 4:03 pm

Just checked pin 20 on the c101 plug (fusebox side) and it has a brown wire.... Is this earth? And can I just cut it and extend using 30 amp wire to the earth point??

Many thanks
A 2 door e30 with 8 cylinders, what could be better winkeye :D
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Fri Jan 06, 2012 5:34 pm

What exactly are you trying to do?

Still, a pin-out of the C101 is available here:

http://www.e30zone.net/e30zonewiki/index.php/M5x_Looms
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Jan 06, 2012 5:42 pm

Its an early car 316 carb, he's putting a 318i (m40) in and we don't want a fire.!

I've inspected pin 20 on his car and it has a brown wire in pin 20........
A 2 door e30 with 8 cylinders, what could be better winkeye :D
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Fri Jan 06, 2012 5:54 pm

DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Jan 06, 2012 6:08 pm

Cut the coont out! As much as possible, put some heat shrink over the end ideally
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Jan 06, 2012 6:18 pm

Cheers dan, that's the one. So it doesn't have to be lengthened and earthed then?......

And grrrmachine,, that's what I was talkin about, cheers for the link ;-)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Jan 06, 2012 6:58 pm

No the other end of the wire is bolted to the earth point behind the glovebox, which is why you end up with melted loom if the new engine loom has a positive wire to Pin 20
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Jan 06, 2012 8:08 pm

Ok mate, will do that then.

Cheers as ever mr the :wink:
A 2 door e30 with 8 cylinders, what could be better winkeye :D