LSD locking
Moderator: martauto
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
Someone, at some point, told me that the normal LSD locks at 25%, and the M3 diff locks at 40%. is there any truth to this?
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
as far as i know.........M3 LSD is 25%
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
Hoobs
- E30 Zone Camper

- Posts: 1204
- Joined: Wed Sep 16, 2009 11:00 pm
- Location: Cornwall
I believe so too, but often uprated to 40.
Rally Prep - Cornwall
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
-
mr_dink
- E30 Zone Regular

- Posts: 812
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Huddersfield
I think 40% lock up was available as an option on some Alpina/Hartge cars.
-
BadDave
- E30 Zone Team Member

- Posts: 6012
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Nr Aberdeen.Scotland(Gods country)
Stock M3 is 25%
Mine is 40%
I have heard of the ramps being tweaked to 75-80% for circuit use though
Mine is 40%
I have heard of the ramps being tweaked to 75-80% for circuit use though
Alpina B10 3.2L #187 (1 of 64 brought into the UK)
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
After talking to Gareth i learnt that with the stock LSD the ramp angles can be changed to allow for 40% lock.BadDave wrote:Stock M3 is 25%
Mine is 40%
I have heard of the ramps being tweaked to 75-80% for circuit use though
However, with the addition of two more clutch plates, so there are now 4 clutch plate, 75% lock can be achieved.
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
okay looks like im after a shot 3.64 to have rebuilt to 40ish% then
cheers boys!
cheers boys!
-
BadDave
- E30 Zone Team Member

- Posts: 6012
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Nr Aberdeen.Scotland(Gods country)
I left mine with Gareth for new seals,bearings and ramp tweaking, and popped round to pick it up on the way back from a Euro trip.redcar wrote:After talking to Gareth i learnt that with the stock LSD the ramp angles can be changed to allow for 40% lock.BadDave wrote:Stock M3 is 25%
Mine is 40%
I have heard of the ramps being tweaked to 75-80% for circuit use though
However, with the addition of two more clutch plates, so there are now 4 clutch plate, 75% lock can be achieved.
No point going for more than 40% lockup or doubling up on the clutchpacks, if it's only a road car.
Alpina B10 3.2L #187 (1 of 64 brought into the UK)
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
2.8L turbo build thread(work in progress)
http://www.e30zone.net/modules.php?name ... 27#1268227
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
yeah gareth is the one i think. very reasonable and havent herd a bad word.BadDave wrote:I left mine with Gareth for new seals,bearings and ramp tweaking, and popped round to pick it up on the way back from a Euro trip.redcar wrote:After talking to Gareth i learnt that with the stock LSD the ramp angles can be changed to allow for 40% lock.BadDave wrote:Stock M3 is 25%
Mine is 40%
I have heard of the ramps being tweaked to 75-80% for circuit use though
However, with the addition of two more clutch plates, so there are now 4 clutch plate, 75% lock can be achieved.
No point going for more than 40% lockup or doubling up on the clutchpacks, if it's only a road car.
40% it is i recon.
now to find a diff!
-
Brian28
- E30 Zone Squatter

- Posts: 1596
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Bournemouth
All Gareth needs is a 3.64 CWP from an open diff, and any medium case LSD that you can find. May be easier/quicker doing that than waiting for a 3.64 LSD.
For sale - E30 320i racer project - sold.
-
Hoobs
- E30 Zone Camper

- Posts: 1204
- Joined: Wed Sep 16, 2009 11:00 pm
- Location: Cornwall
I have a 3.64 LSD spare. 
Rally Prep - Cornwall
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
I have a 4 clutch 60% 3.64 motorsport LSD built by crown diffs, you do notice a difference but I haven't really got the power to really make use of it.. yet.. it's a beautiful drive though..

-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
ah i see the crown wheels are interchangable are they. nice. cheers mateBrian28 wrote:All Gareth needs is a 3.64 CWP from an open diff, and any medium case LSD that you can find. May be easier/quicker doing that than waiting for a 3.64 LSD.
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
how much you after bro?Hoobs wrote:I have a 3.64 LSD spare.
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
sweet how much that set you back? what motor you running?Tom_Maverick wrote:I have a 4 clutch 60% 3.64 motorsport LSD built by crown diffs, you do notice a difference but I haven't really got the power to really make use of it.. yet.. it's a beautiful drive though..
cheers lads,
Matt
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
I'm running a standard m20b25 (it does go well though and will happily steam past a friends 2.5 so I'm a little suspicious) for the minute and the diff was done by the previous ownerrandomspeedfreak wrote:sweet how much that set you back? what motor you running?Tom_Maverick wrote:I have a 4 clutch 60% 3.64 motorsport LSD built by crown diffs, you do notice a difference but I haven't really got the power to really make use of it.. yet.. it's a beautiful drive though..
cheers lads,
Matt

-
Hoobs
- E30 Zone Camper

- Posts: 1204
- Joined: Wed Sep 16, 2009 11:00 pm
- Location: Cornwall
Anyone here run a 4:1 before? I'm about to drop one in my track car and wondered what to expect?
Rally Prep - Cornwall
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
-
MrBenn
- E30 Zone Regular

- Posts: 672
- Joined: Sun Jan 20, 2008 11:00 pm
- Location: Bradford-on-Avon, Wiltshire
With a 325 engine?Hoobs wrote:Anyone here run a 4:1 before? I'm about to drop one in my track car and wondered what to expect?
I had one in my old track car when the 2.5 was fitted, wasn't much in it when me and your cars old owner used to go to tracks.
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
i currently have a 4.1 open in the m52. its just too short, pretty pointless even for a track car - these big straight 6s dont really need the shorter ratio - it wastes the torque curve. id go for something a bit longerHoobs wrote:Anyone here run a 4:1 before? I'm about to drop one in my track car and wondered what to expect?
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
like a 3.64 on an m52?
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
yes for a road car using the E30 gearboxredcar wrote:like a 3.64 on an m52?
For a track car, I'd be swayed to use 3.9:1
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
Is it more common to use the iS gearbox on an m52 swap rather than the e36 328i gearbox?
-
Hoobs
- E30 Zone Camper

- Posts: 1204
- Joined: Wed Sep 16, 2009 11:00 pm
- Location: Cornwall
I've got an M52 in my e21 and just fitted an e12 535 diff which is 3:07. It pulls quite well. 
Rally Prep - Cornwall
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
ARM BMW & Motorsport
2002
E30 M3 2.3 - Alpha N, C/F airbox etc
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
25% is indeed what all E30 LSD's got from the factory
I personally think BMW should have gone for a 40% lock on all LSD's! It's just so much better when 'pressing on' than a 25% lock. The slight rear wheel shuffle on sensible 'T' junction exits would however put off the yuppie folk who bought these turds 20+ years ago!
for a medium case E30 diff, E28, E36 and E34 diffs can also donate LSD packs and CW&P's (ratios) so all sort of mutant diffs can be built. Just make sure the diff is the same casing size...!
I personally think BMW should have gone for a 40% lock on all LSD's! It's just so much better when 'pressing on' than a 25% lock. The slight rear wheel shuffle on sensible 'T' junction exits would however put off the yuppie folk who bought these turds 20+ years ago!
providing the parts are from the same diff casing size then yes.randomspeedfreak wrote:ah i see the crown wheels are interchangable are they. nice. cheers mateBrian28 wrote:All Gareth needs is a 3.64 CWP from an open diff, and any medium case LSD that you can find. May be easier/quicker doing that than waiting for a 3.64 LSD.
for a medium case E30 diff, E28, E36 and E34 diffs can also donate LSD packs and CW&P's (ratios) so all sort of mutant diffs can be built. Just make sure the diff is the same casing size...!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
