can i use these gearboxes?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jonesy318
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Thu Dec 24, 2009 11:00 pm
Location: Peterborough..

Post Sun Jan 01, 2012 3:02 pm

Afternoon guys, i've finally got my m42 16v engine back together and before fiiting the box to engine i thought i'd check the i.d of it using the 'e30 bible'.
it would turn out i have a 240 'bms' which according to the book is for a 320 6cyl!!!!!!!!
i offered it up to the block and the main 4 bolts all go in and bolts up however the 3 bolt holes around the back of the sump obviously dont line up, i also have a 325 sport box that bolts up exactly the same as the 320 box, can i use these boxes? If so am i likely to run in to any problems or am i best off getting an 318is box and using that along with the correct prop aswell, any help or advice much appreciated.............. :? :? :?
mr_dink
E30 Zone Regular
E30 Zone Regular
Posts: 812
Joined: Thu Jan 03, 2008 11:00 pm
Location: Huddersfield

Post Sun Jan 01, 2012 3:23 pm

You will need a 4 pot gearbox. IS would be best but a 316i/318i box is nearly identical and has the same ratios.
User avatar
jonesy318
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Thu Dec 24, 2009 11:00 pm
Location: Peterborough..

Post Sun Jan 01, 2012 3:56 pm

ok thanks for that, any idea what these 6cyl boxes are fetching, may aswell sell them if they're no use to me???
User avatar
78gizmo
E30 Zone Regular
E30 Zone Regular
Posts: 265
Joined: Fri Nov 16, 2007 11:00 pm
Location: Torbay, South Devon

Post Wed Jan 04, 2012 9:04 pm

Just bolt your M42 engine upto the cars M40 box if you still have it (i did). I have also got an M42 box for sale if thats what you want to fit.
User avatar
jonesy318
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Thu Dec 24, 2009 11:00 pm
Location: Peterborough..

Post Wed Jan 04, 2012 9:06 pm

Dont have the m40 box as it was originally an auto, could i use either of these boxes i have? if not how much for the box you have?
rix313
E30 Zone Team Member
E30 Zone Team Member
Posts: 4970
Joined: Fri Oct 31, 2008 11:00 pm
Location: Silverstone

Post Wed Jan 04, 2012 9:23 pm

If you use the M40 box you need a M40 prop, if you use the M42 box you need an M42 prop. If you bolt on a 6cyl box you'll need to change your diff ratio too as the gearing will have been altered and not correct for the engine.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Thu Jan 05, 2012 5:27 am