m42 end float,how much????

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jonesy318
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Thu Dec 24, 2009 11:00 pm
Location: Peterborough..

Post Wed Jan 04, 2012 9:22 pm

Hi guys, just been reading a few things on here and while i'm having gearbox issues and before i put the engine and box back in i'm going to check my m42 for and float movement. question is how much is normal or acceptable and what should i be worried at, anyone know the exact specs or measurements??? want to avoid putting it all in and then find its buggered :? cheers Ian
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Wed Jan 04, 2012 10:03 pm

0.08-0.163mm is BMW spec.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Wed Jan 04, 2012 10:31 pm

what is float movement.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Wed Jan 04, 2012 10:47 pm

When the M42 pilot takes a dump before cranking up the awesomeness, if it floats (not very heavy therefore minimum weight reduction) there is a tolerance in the overall measurement from one end of the turd to the other which determines the usefulness of said shit = end float.
Im sure demlot can go into the technicalities of this in more depth :)