My OBC is bleeding

Need technical Q/A then you're in the right place

Moderator: martauto

Gouki
E30 Zone Addict
E30 Zone Addict
Posts: 2262
Joined: Mon Jun 13, 2005 11:00 pm

Post Wed Jan 04, 2012 2:25 pm

Guys, upon starting up the car after a long slumber my OBC has developed a little bleeding on the LCD display in the corner as pictured below.

Question is what can be done to repair this and what could have caused this to leak or is this a common thing?

Thanks.

Image
Image
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Wed Jan 04, 2012 2:33 pm

changes in temperature and just old age cause this and there's nowt you can do.. sadly it's really common in old LCD screens...
Image
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Wed Jan 04, 2012 2:36 pm

this is the liquid crystal display that has broken,

the screen is a matrix of liquid crystal cells that change colour when a voltage is applied to them, in your case the cells have broken, or the very fine wires to each cell have shorted, this is normally due to bending (or perhaps excessive temps) and it is not fixable,

you may be able to replace the LCD screen on the OBC but given the price of OBC's it is probably ust easier to change the whole unit.
Image
Gouki
E30 Zone Addict
E30 Zone Addict
Posts: 2262
Joined: Mon Jun 13, 2005 11:00 pm

Post Wed Jan 04, 2012 5:51 pm

This is the 2nd OBC as my first one had an issue with the timer light always being illuminated so changed it for this one! Crap! Right can the LCD display be rescued from my old OBC to this one? So swap over the LCD displays?
Image
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Thu Jan 05, 2012 11:04 am

if it is soldered you will find it has many connections, you can simply unsolder and resolder the good one in, but it will likely be tricky

if you are very lucky it will only be plugged in, so a quick swap.

Open the broken one first to see what you find, but an easier solution may be to fix the timer light button
Image
Gouki
E30 Zone Addict
E30 Zone Addict
Posts: 2262
Joined: Mon Jun 13, 2005 11:00 pm

Post Thu Jan 05, 2012 12:12 pm

Dontt think I will be that lucky! lol. AS for the old OBC I don't know what the problem is and why the timer light always stays on but I had assumed that was faulty!

So any idea on fixing my timer light on the old one?
Image