M20 engine rubber cam cut outs

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jesmond
E30 Zone Newbie
E30 Zone Newbie
Posts: 107
Joined: Thu May 19, 2005 11:00 pm
Location: Darlington, County Durham

Post Tue Jan 03, 2012 2:13 pm

Hi everybody and best wishes to you all.

Hope this thread is ok here. I need to get hold of some new rubber/plastic cut outs for the ends of the cam cover/head on my 325 M20 engine '87. As you know there are 4 in total. Mine have leaked since i've owned the car, and every time the tappetts are checked, or if the cam cover is off, no amount of 'gumming up' works in stopping these little blighters from leaking. I finally want to try and stop this, however BMW main dealer have told me they can't get them! Their diagrams don't have them highlighted as a part(s). Does anyone know of any other source for these. Any help much appreciated.

Cheers

Paul
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Jan 03, 2012 2:52 pm

Ask them to look up 11331264519

http://www.realoem.com/bmw/showparts.do ... g=11&fg=25

This should be what you need.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
User avatar
jesmond
E30 Zone Newbie
E30 Zone Newbie
Posts: 107
Joined: Thu May 19, 2005 11:00 pm
Location: Darlington, County Durham

Post Tue Jan 03, 2012 3:15 pm

Ah, thanks for that, I've seen that diagram, but it's the half moon cut outs i'm after. There are 2 each end of the cam cut out of the head
User avatar
E30SPORTMAD
E30 Zone Regular
E30 Zone Regular
Posts: 305
Joined: Sat May 28, 2011 11:00 pm
Location: N.Ireland/UK

Post Tue Jan 03, 2012 6:50 pm

Think i have some spare in a head set that i used other gaskets from, can check tomorrow :D
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Jan 03, 2012 7:25 pm

capri_rob wrote:Ask them to look up 11331264519

http://www.realoem.com/bmw/showparts.do ... g=11&fg=25
This diagram is exactly what your BMW dealer brings up on their parts screen. They are either idiots or plain lazy!
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Jan 03, 2012 9:31 pm

jesmond wrote:Ah, thanks for that, I've seen that diagram, but it's the half moon cut outs i'm after. There are 2 each end of the cam cut out of the head
The "half moon cut outs" should be p/n 11331264519
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
User avatar
jesmond
E30 Zone Newbie
E30 Zone Newbie
Posts: 107
Joined: Thu May 19, 2005 11:00 pm
Location: Darlington, County Durham

Post Wed Jan 04, 2012 10:48 am

The "half moon cut outs" should be p/n 11331264519

But they aren't.
Rob, are you then saying that you would expect to see the cut out's that i've described, as being the 'blind plug' p/n 13 - 11331264519 on the diagram? Because if so, then the diagram is wrong, and I should just order this part number. But, otherwise, to me this looks like completely the wrong part.
I wish I could draw them, but they are all individual. There are 2 either end, and they are made of black plastic or rubber, and are arch shaped or half moon as it were. If you've done a cam gasket before you may not even have noticed them, but they come out of their 'seats' and are about 35m tall by about 25m wide. Imagine the arch sized window shape in 'Playschool' and you're there! Don't know if you're as old as me and can remember such things lol.
Any further thoughts guys much appreciated.

Thanks

Paul
User avatar
lamby
E30 Zone Regular
E30 Zone Regular
Posts: 251
Joined: Wed Jan 27, 2010 11:00 pm

Post Wed Jan 04, 2012 11:11 am

that is them,blind plug number 13,parts don,t always look the same on drawings.i ordered them for mine and exactly right.two each end next to each other leaking oil.
User avatar
jesmond
E30 Zone Newbie
E30 Zone Newbie
Posts: 107
Joined: Thu May 19, 2005 11:00 pm
Location: Darlington, County Durham

Post Wed Jan 04, 2012 11:21 am

Ar, you beauties, thanks guys. I'll order with confidence.
Good old zoners do it again!

Hope to be back soon.

Paul